Bitts
_returns_to_the_operational_side_of_the_Pacific_Submarine_Force_as_she_returns_to_Pearl_Harbor_Naval_Station.jpg)
Bitts are paired vertical wooden or metal posts mounted either aboard a ship or on a
mooring lines, ropes, hawsers, or cables.[1] Bitts aboard wooden sailing ships (sometime called cable-bitts) were large vertical timbers mortised into the keel and used as the anchor cable attachment point.[2] Bitts are carefully manufactured and maintained to avoid any sharp edges that might chafe and weaken the mooring lines.[3]
Use
Mooring lines may be laid around the bitts either singly or in a figure-8 pattern with the friction against tension increasing with each successive turn. As a verb bitt means to take another turn increasing the friction to slow or adjust a mooring ship's relative movement.[1]
Mooring fixtures of similar purpose:
- A bollard is a single vertical post useful to receive a spliced loop at the end of a mooring line.[1]
- A cleat has horizontal horns.[4]
References
- ^ a b c Knight, Austin M. (1937). Modern Seamanship (Tenth ed.). New York: D. Van Nostrand Company. p. 783.
- ISBN 0-670-81416-4.
- ^ Manning, George Charles (1930). Manual of Naval Architecture. New York: D. Van Nostrand Company. p. 158.
- ^ Knight, p.788
Wikimedia Commons has media related to Bitts.