Noise measurement

Source: Wikipedia, the free encyclopedia.

In

aircraft noise, road traffic noise, entertainment venues and neighborhood noise. One of the definitions of noise covers all "unwanted sounds".[2] When sound levels reach a high enough intensity, the sound, whether it is wanted or unwanted, may be damaging to hearing.[3]
Environmental noise monitoring is the measurement of noise in an outdoor environment caused by transport (e.g. motor vehicles, aircraft, and trains), industry (e.g. machines) and recreational activities (e.g. music). The laws and limits governing environmental noise monitoring differ from country to country.

At the very least, noise may be annoying or displeasing or may disrupt the activity or balance of human or animal life, increasing levels of aggression, hypertension and stress. In the extreme, excessive levels or periods of noise can have long-term negative health effects such as hearing loss,[4] tinnitus,[5] sleep disturbances,[6] a rise in blood pressure,[7] an increase in stress[8] and vasoconstriction,[9] and an increased incidence of coronary artery disease.[10][11] In animals, noise can increase the risk of death by altering predator or prey detection and avoidance, interfering with reproduction and navigation,[12] and contributing to permanent tinnitus and hearing loss.[13][14]

Various interventions are available to combat environmental noise. Roadway noise can be reduced by the use of noise barriers,[15] limitation of vehicle speeds,[16] alteration of roadway surface texture, limitation of heavy vehicles, use of traffic controls that smooth vehicle flow to reduce braking and acceleration, and tire design.[17] Aircraft noise can be reduced by using quieter jet engines,[18][19][20] altering flight paths and considering the time of day to benefit residents near airports.[21] Industrial noise is addressed by redesign of industrial equipment, shock mounted assemblies and physical barriers in the workplace.[22]

Noise may be measured using a sound level meter at the source of the noise.[23][24][25] Alternatively, an organization or company may measure a person's exposure to environmental noise in a workplace via a noise dosimeter.[26] The measurements taken using either of these methods will be evaluated according to the standards below.

Audio Systems and Broadcasting

Noise measurement can also be part of a test procedure using white noise, or some other specialized form of test signal. In audio systems and broadcasting, specific methods are used to obtain subjectively valid results in order that different devices and signal paths may be compared regardless of the inconsistent spectral distribution and temporal properties of the noise that they generate. In particular, the ITU-R 468 noise weighting was devised specifically for this purpose and is widely used for professional audio and broadcast measurements.

Standards

There are a number of standards for noise measurement, each with a different goal or focus, including:

See also

References

  1. ^ Audio, NTi. "Unattended Noise Monitoring" (PDF). www.nti-audio.com.
  2. S2CID 23675085
    .
  3. ^ "CAOHC Noise Measurement Course". www.caohc.org. Retrieved 2020-11-21.
  4. ^ "Safety and Health Topics | Occupational Noise Exposure | Occupational Safety and Health Administration". www.osha.gov. Retrieved 2020-10-10.
  5. ^ "Causes". www.ata.org. 2015-03-02. Retrieved 2020-10-10.
  6. S2CID 16121980
    .
  7. PMID 23470795
    .
  8. ^ "Open Office Noise Increases Stress". WebMD. Retrieved 2020-11-21.
  9. ^ "Open Office Noise Increases Stress". WebMD. Retrieved 2020-11-21.
  10. S2CID 2991257
    .
  11. PMID 24311120
    .
  12. ^ "Review of noise impacts on marine mammals yields new policy recommendations". phys.org. Retrieved 2020-11-22.
  13. ISBN 978-1-59745-285-4
    , retrieved 2020-10-10
  14. PMID 25101939
    .
  15. ^ Barrier, Hatko (2020-04-20). "How much does noise barrier cost?". Hatko Sound Barrier. Retrieved 2020-11-22.
  16. ^ "NPC Resources: Noise Increases with Vehicle Speed". nonoise.org. Retrieved 2020-11-22.
  17. ^ atlanticei (2019-03-20). "Reducing Excessive Noise Using Engineering Methods | Atlantic Environmental". Atlantic Environmental Incorporated. Retrieved 2020-11-21.
  18. ^ "Leading the way in aircraft noise reduction | Engineering | University of Southampton". www.southampton.ac.uk. Retrieved 2020-11-21.
  19. ^ Potter, Sean (2018-06-25). "NASA Technologies Significantly Reduce Aircraft Noise". NASA. Retrieved 2020-11-21.
  20. ^ "Reducing Aviation Noise, Advancing the Aviation Enterprise | Volpe National Transportation Systems Center". www.volpe.dot.gov. Retrieved 2020-11-21.
  21. ^ "How to Control Aircraft Noise? | Noise Pollution". Essays, Research Papers and Articles on Environmental Pollution. 2018-03-12. Retrieved 2020-11-21.
  22. ^ "Controls for Noise Exposure | NIOSH | CDC". www.cdc.gov. 2020-06-22. Retrieved 2020-11-22.
  23. ^ "How is Sound Measured?". It's a Noisy Planet. Protect Their Hearing. 28 January 2019. Retrieved 2020-11-22.
  24. Woodford, Chris (2009-01-28). "How decibel sound level meters work"
    . Explain that Stuff. Retrieved 2020-11-22.
  25. ^ "Sound-level meter | instrument". Encyclopedia Britannica. Retrieved 2020-11-22.
  26. ^ Selwyn, Bob (September 1, 2010). "The Use of Noise Dosimeters in the Workplace -". Occupational Health & Safety. Retrieved 2020-11-22.
Retrieved from "https://en.wikipedia.org/w/index.php?title=Noise_measurement&oldid=1282203907"