Tatra 13

This article does not cite any sources. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. Find sources: "Tatra 13" – news · newspapers · books · scholar · JSTOR (March 2019) (Learn how and when to remove this message)

Tatra 13
Curb weight		800–1,200 kg (1,800–2,600 lb)

The Tatra 13 is a vintage truck made by Czech manufacturer Tatra. It was manufactured between 1924 and 1933.

The truck was derived from model Tatra 11, with which it shared components and differed from it by strengthened rear axle. Initially the front wheels didn't have brakes. As Tatra 11 was succeeded by Tatra 12 (1926), the truck underwent modernization, which among other things brought it brakes to all four wheels.

Design

Engine

The Tatra 13 initially used the engine from the

, with a capacity of 1057 cc and power of about 10 kilowatts (13 hp) at 2800 rpm.

The gearbox had four speeds (+reverse).

Chassis

The initial chassis was derived from Tatra 11, while later from Tatra 12.

The front axle is stiff, suspended by transverse

, carried by the aluminium engine block, while the rear axle consists of two independent swinging half-axles, suspended by a transverse half-elliptic spring, which is mounted on top of the differential box and leaning its ends against the brake plates. The advantage of this solution is excellent progressiveness of the suspension.

Versions

The vehicle weighed about 1000 kg while it had payload of 800–1200 kg depending on version.

Tatra 13 was offered foremost as a small truck, however also buses were derived from it. It differs from Tatra 11 and 12 not only by the carrossery, but also by use of larger wheels at the rear.

References

• Tatra portal - Web site about TATRA cars and trucks - Tatra 13