User:PK2/Documentation for cite ssrn

When set, work changes the formatting of other parameters in the same citation:

title is not italicized and is enclosed in quotes.

chapter does not display (and will produce an error message).

Publisher

• publisher: Name of publisher; may be wikilinked if relevant. The
  publisher is the company, organization or other legal entity that publishes the work being cited. Do not use the publisher parameter for the name of a work
  (e.g. a website, book, encyclopedia, newspaper, magazine, journal, etc.). If the name of the publisher changed over time, use the name as stated in the publication or used at the time of the source's publication. Corporate designations such as "Ltd", "Inc.", or "GmbH" are not usually included. Not normally used for periodicals. Omit where the publisher's name is substantially the same as the name of the work (for example, The New York Times Co. publishes The New York Times newspaper, so there is no reason to name the publisher). Displays after title.
• place: For news stories with a dateline, the location where the story was written. If the name of the location changed over time, use the name as stated in the publication or used at the time of the source's publication. In earlier versions of the template this was the publication place, and for compatibility, will be treated as the publication place if the publication-place parameter is absent; see that parameter for further information. Alias: location
• publication-place: Geographical place of publication; generally not wikilinked; omit when the name of the work includes the publication place, for example, The Boston Globe, The Times of India. Displays after the title. If the name of the publication place changed over time, use the name as stated in the publication or used at the time of the source's publication. If only one of publication-place, place, or location is defined, it will be treated as the publication place and will show after the title; if publication-place and place or location are defined, then place or location is shown before the title prefixed with "written at" and publication-place is shown after the title.
• publication-date: Date of publication when different from the date the work was written. If date (or year) is also defined and is different, then publication-date displays preceded by "published" and enclosed in parentheses, following publisher. If date (or year) is not defined, publication-date is displayed as date. Use the same format as other dates in the article; do not wikilink.
• via: Name of the content deliverer (if different from publisher). via is not a replacement for publisher, but provides additional detail. It may be used when the content deliverer (e.g. NewsBank) presents the source in a format different from the original, when the URL provided does not make clear the identity of the deliverer, where no URL or DOI is available (EBSCO), or if the deliverer requests attribution. See the access level parameters to display access restrictions.

• agency: The news agency (wire service) that provided the content; examples: Associated Press, Reuters, Agence France-Presse. Do not use for sources published on the agency's own website; e.g. apnews.com or reuters.com; instead, use work or publisher. May be wikilinked if relevant.

Series

• series or version: When the source is part of a series, such as a book series or a journal, where the issue numbering has restarted.

In-source locations

• page: The number of a single page in the source that supports the content. Use either |page= or |pages=, but not both. Displays preceded by p. unless |no-pp=yes. If hyphenated, use {{hyphen}} to indicate this is intentional (e.g. |page=3{{hyphen}}12), otherwise several editors and semi-automated tools will assume this was a misuse of the parameter to indicate a page range and will convert |page=3-12 to |pages=3{{ndash}}12. Alias: p.
• OR: pages: A range of pages in the source that supports the content. Use either |page= or |pages=, but not both. Separate using an en dash (–); separate non-sequential pages with a comma (,); do not use to indicate the total number of pages in the source. Displays preceded by pp. unless |no-pp=yes.
  Hyphens are automatically converted to en dashes; if hyphens are appropriate because individual page numbers contain hyphens, for example: pp. 3-1–3-15, use double parentheses to tell the template to display the value of |pages= without processing it, and use {{hyphen}} to indicate to editors that a hyphen is really intended: |pages=((3{{hyphen}}1{{ndash}}3{{hyphen}}15)). Alternatively, use |at=, like this: |at=pp. 3-1–3-15. Alias: pp.
  • no-pp: Set to yes, y, or true to suppress the p. or pp. notations where this is inappropriate; for example, where |page=Front cover or |pages=
    passim
    .
• OR: at: For sources where a page number is inappropriate or insufficient. Overridden by |page= or |pages=. Use only one of |page=, |pages=, or |at=.
  Examples: page (p.) or pages (pp.); section (sec.), column (col.), paragraph (para.); track; hours, minutes and seconds; act, scene, canto, book, part, folio, stanza, back cover, liner notes, indicia, colophon, dust jacket, verse.
• For |quote-page= and |quote-pages= used in conjunction with |quote=, see here.

URL

• url: URL of an online location where the text of the publication named by title can be found. Cannot be used if title is wikilinked. If applicable, the link may point to the specific page(s) referenced. Remove tracking parameters from URLs, e.g. #ixzz2rBr3aO94 or ?utm_source=google&utm_medium=...&utm_term=...&utm_campaign=.... For linking to pages in PDF files or in Google Books, see
  WP:PAGELINKS. Do not link to any commercial booksellers, such as Amazon
  ; use |isbn= or |oclc= to provide neutral search links for books. Invalid URLs, including those containing spaces, will result in an error message.
  • access-date: Full date when the content pointed to by url was last verified to support the text in the article; do not wikilink; requires url; use the same format as other access and archive dates in the citations.
    WP:CITEWEB. Access dates are not required for links to published research papers or published books. Note that access-date is the date that the URL was found to be working and to support the text being cited. See "Automatic date formatting" above for details about interaction with {{use dmy dates}} and {{use mdy dates}}. Can be hidden or styled
    by registered editors. Alias: accessdate.
  • archive-url: The URL of an
    Wikipedia:Using the Wayback Machine) and archive.today (see Help:Using archive.today
    ); requires archive-date and url. By default (overridden by |url-status=live) the archived link is displayed first, with the original link at the end. Alias: archiveurl.
    • archive-date: Archive-service snapshot-date; preceded in display by default text "archived from the original on". Use the same format as other access and archive dates in the citations. This does not necessarily have to be the same format that was used for citing publication dates.[date 1] Do not wikilink; templated dates are discouraged. See "Automatic date formatting" above for details about interaction with {{use dmy dates}} and {{use mdy dates}}. Alias: archivedate.
    • url-status: A control parameter to select one of |url= or |archive-url= to link |title=; requires url and archive-url. Use {{dead link}} to mark dead |url= when there is no |archive-url=.

      Accepts multiple keywords:

      • dead – (default condition when |url-status= omitted or empty) selects |archive-url=
      • live – selects |url=; used when |url= is preemptively archived with |archive-url=
      • deviated – selects |archive-url=; used when |url= is still 'live' but no-longer supports the text in a Wikipedia article
      • unfit – selects |archive-url=; used when |url= links to vice (gambling, pornography), advertising, or other unsuitable page; links to |url= are suppressed in the rendering. If an entire domain is unsuitable, consider instead
        WP:URLREQ
      • usurped – selects |archive-url=; used when the domain in |url= no longer serves its original intent, particularly when the domain has been (mis)appropriated by other entities, such as vice, reseller and advertising sites; links to |url= are suppressed in the rendering. Bot help is available at
        WP:URLREQ
      • bot: unknown – Editors may encounter this value which is left behind by a bot that has visited the reference and wasn't able to determine the status of the url. The page will be automatically placed in Category:CS1 maint: bot: original URL status unknown when this value is present, and per the instructions in that category, editors manually evaluate the state of the URL and change the parameter value appropriately.

    • archive-format: File format of the work referred to by archive-url; for example: DOC or XLS; displayed in parentheses after the archive link. HTML is implied and should not be specified. PDF is auto-detected and should not be specified. Does not change the
      alt text; thus, they do not add file format information for the visually impaired. (This is not a concern with PDF, because the auto-detection will add "(PDF)" as descriptive text.) See Using |format=
  • url-access: See Access indicators for url-holding parameters
• format: File format of the work referred to by url; for example: DOC or XLS; displayed in parentheses after title. (For media format, use type.) HTML is implied and should not be specified. PDF is auto-detected and should not be specified. Does not change the
  alt text; thus, they do not add file format information for the visually impaired. (This is not a concern with PDF, because the auto-detection will add "(PDF)" as descriptive text.) See Using |format=

• ref: the citation's HTML anchor identifier, when different from its default. When set, |ref=ID generates an anchor with the given ID (the id= attribute in the citation's <cite id="ID"> HTML tag). Setting |ref=ID identifies the template as a target and allows
  harv}} templates. Since April 2020, the parameter / keyword pair |ref=harv has no special meaning; this deprecated setting should not be used and may be removed from existing cs1|2 templates. To inhibit anchor ID creation, set |ref=none. Aliases: none. See Template:Citation/doc § Anchors for Harvard referencing templates
  .

• id: A
  NCJ 122967
  instead.

• arxiv: arXiv identifier; for example: |arxiv=hep-th/9205027 (before April 2007) or |arxiv=0706.0001 (April 2007 – December 2014) or |arxiv=1501.00001 (since January 2015). Do not include extraneous file extensions like ".pdf" or ".html". Aliases: eprint.
• asin: Amazon Standard Identification Number; if first character of asin value is a digit, use isbn. Because this link favours one specific distributor, include it only if standard identifiers are not available. Example |asin=B00005N5PF. Aliases: ASIN.
  • asin-tld: ASIN top-level domain for Amazon sites other than the US; valid values: ae, au, br, ca, cn, de, es, fr, in, it, jp, mx, nl, pl, sa, se, sg, tr, uk. Aliases: none.
• bibcode: bibcode; used by a number of astronomical data systems; for example: 1974AJ.....79..819H. Aliases: none.
• biorxiv: bioRxiv id, as in the entire DOI (e.g. 10.1101/078733 for http://biorxiv.org/content/early/2016/10/01/078733 or https://doi.org/10.1101/078733; 10.1101/2020.07.24.220400 for https://doi.org/10.1101/2020.07.24.220400). Aliases: none.
• citeseerx: CiteSeerX id, a string of digits and dots found in a CiteSeerX URL (e.g. 10.1.1.176.341 for http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.176.341). Aliases: none.
• doi: Digital object identifier; for example: 10.1038/news070508-7. It is checked to ensure it begins with (10.). Aliases: DOI.
  • Supports accept-this-as-written markup to indicate valid DOIs using a non-standard format, see below.
  • doi-broken-date: Date a valid DOI was found to be non-working/inactive at https://doi.org. Use the same format as other dates in the article. Aliases: none.
• eissn:
  International Standard Serial Number for the electronic media of a serial publication; eight characters may be split into two groups of four using a hyphen, but not an en dash
  or a space; example |eissn=1557-2986. Aliases: EISSN.
  • Supports accept-this-as-written markup to indicate valid eISSNs using a non-standard format, see below.
• hdl: Handle System identifier for digital objects and other resources on the Internet; example |hdl=20.1000/100. Aliases: HDL.
• isbn:
  International Standard Book Number; for example: 978-0-8126-9593-9. (See Wikipedia:ISBN and ISBN § Overview
  .) Hyphens in the ISBN are optional, but preferred. Use the ISBN actually printed on or in the book. Use the 13-digit ISBN – beginning with 978 or 979 – when it is available. If only a 10-digit ISBN is printed on or in the book, use it. ISBNs can be found on the page with the publisher's information – usually the back of the title page – or beneath the barcode as a number beginning with 978 or 979 (barcodes beginning with any other numbers are not ISBNs). For sources with the older 9-digit SBN system, use sbn. Do not convert a 10-digit ISBN to 13-digit by just adding the 978 prefix; the last digit is a calculated check digit and just making changes to the numbers will make the ISBN invalid. This parameter should hold only the ISBN without any additional characters. It is checked for length, invalid characters – anything other than numbers, spaces, and hyphens, with "X" permitted as the last character in a 10-digit ISBN – and the proper check digit. Aliases: ISBN.
  • Use the {{Format ISBN}} template within the parameter – in the form |isbn={{Format ISBN|9780812695939}} – if you are unsure of how any particular ISBN should be hyphenated, as the pattern varies by country and publisher.
  • Supports accept-this-as-written markup to indicate valid ISBNs using a non-standard format, see below.
• ismn:
  Hyphens
  or spaces in the ISMN are optional. Use the ISMN actually printed on or in the work. This parameter should hold only the ISMN without any additional characters. It is checked for length, invalid characters – anything other than numbers, spaces, and hyphens – and the proper check digit. Aliases: ISMN.
• issn:
  International Standard Serial Number; eight characters may be split into two groups of four using a hyphen, but not an en dash
  or a space; example |issn=2049-3630. Aliases: ISSN.
  • Supports accept-this-as-written markup to indicate valid ISSNs using a non-standard format, see below.
• jfm:
  Jahrbuch über die Fortschritte der Mathematik
  ; do not include "JFM" in the value; example |jfm=53.0144.01. Aliases: JFM.
• jstor: JSTOR reference number; for example: |jstor=3793107. Aliases: JSTOR.
• lccn: Library of Congress Control Number. When present, alphabetic prefix characters are to be lower case and without a space; example |lccn=79-57364 or |lccn=2004042477 or |lccn=e09001178. Aliases: LCCN.
• mr: Mathematical Reviews; example |mr=630583. Aliases: MR.
• oclc:
  OCLC Number for looking up publications in the WorldCat union catalog
  ; example |oclc=9355469. Aliases: OCLC.
• ol: Open Library identifier; do not include "OL" in the value; example |ol=7030731M. Aliases: OL.
• osti: Office of Scientific and Technical Information; example |osti=4367507. Aliases: OSTI.
• pmc:
  open repository
  full-text of a journal article, e.g. |pmc=345678. Do not include "PMC" in the value. See also the pmid parameter, below; these are two different identifiers. Aliases: PMC.
  • pmc-embargo-date: Date that pmc goes live; if this date is in the future, then pmc is not linked until that date. Aliases: none.
• pmid: PubMed; use unique identifier; example |pmid=17322060 See also the pmc parameter, above; these are two different identifiers. Aliases: PMID.
• rfc: Request for Comments; example |rfc=3143. Aliases: RFC.
• sbn:
  Standard Book Number
  ; example |sbn=356-02201-3. Aliases: SBN.
  • Supports accept-this-as-written markup to indicate valid SBNs using a non-standard format, see below.
• ssrn: Social Science Research Network; example |ssrn=1900856. Aliases: SSRN.
• s2cid: Semantic Scholar corpus ID; example |s2cid=37220927. Aliases: S2CID.
• zbl:
  Zentralblatt MATH
  ; example |zbl=0472.53010 For zbMATH search results like JFM 35.0387.02 use |jfm=35.0387.02. Aliases: ZBL.

In very rare cases, valid identifiers (f.e., as actually printed on publications) do not follow their defined standard format or use non-conforming checksums, which would typically cause an error message to be shown. Do not alter them to match a different checksum. In order to suppress the error message, some identifiers (|doi=, |eissn=, |isbn=, |issn=, and |sbn=) support a special accept-this-as-written markup which can be applied to disable the error-checking (as |<param>=((<value>))). If the problem is down to a mere typographical error in a third-party source, correct the identifier value instead of overriding the error message.

For some identifiers, it is possible to specify the access status using the corresponding |<param>-access= parameter.

For {{cite journal}}, some identifiers (specifying free resources) will automatically be linked to the title when |url= and |title-link= are not used to specify a different link target. This behaviour can be overridden by one out of a number of special keywords for |title-link= to manually select a specific source (|title-link=pmc or |title-link=doi) for auto-linking or to disable the feature (|title-link=none).

It is not necessary to specify a URL to a link identical to a link also produced by an identifier. The |url= parameter (or |title-link=) can then be used for providing a direct deep link to the corresponding document or a convenience link to a resource that would not otherwise be obviously accessible.

Quote

• quote: Relevant text quoted from the source. Displays enclosed in quotes. When supplied, the citation terminator (a period by default) is suppressed, so the quote must include terminating punctuation. If script-quote is defined, use quote to hold a
  Romanization
  (if available) of the text in script-quote.
  • script-quote: Original quotation for languages that do not use a Latin-based script (Arabic, Chinese, Cyrillic, Greek, Hebrew, Japanese, Korean, etc.); not italicized, follows italicized Romanization defined in quote (if available). Alias: none. Must be prefixed with one of the supported language codes to help browsers properly display the script:

    ... |quote=Tōkyō tawā |script-quote=ja:東京タワー |trans-quote=Tokyo Tower ...

  • trans-quote: English translation of the quotation if the source quoted is in a foreign language. Displays in square brackets. Alias: none.
• quote-page: The number of a single page quoted in |quote=. Use either |quote-page= or |quote-pages=, but not both. Should be a subset of the page(s) specified in |page=, |pages= or |at=. Displays preceded by p. unless |no-pp=yes. If hyphenated, use {{hyphen}} to indicate this is intentional (e.g. |quote-page=3{{hyphen}}12). Alias: none.
• OR: quote-pages: A list or range of pages quoted in |quote=. Use either |quote-page= or |quote-pages=, but not both. Should be a subset of the pages specified in |pages= or |at=. Separate using an en dash (–); separate non-sequential pages with a comma (,). Displays preceded by pp. unless |no-pp=yes is defined. Hyphens are automatically converted to en dashes; if hyphens are appropriate because individual page numbers contain hyphens, for example: pp. 3-1–3-15, use double parentheses to tell the template to display the value of |quote-pages= without processing it, and use {{hyphen}} to indicate to editors that a hyphen is really intended: |quote-pages=((3{{hyphen}}1{{ndash}}3{{hyphen}}15)). Alias: none.

Editors

• editor-last: surname of editor. Do not wikilink—use editor-link instead. Where the surname is usually written first—as in Chinese—or for corporate authors, simply use editor-last to include the same format as the source. Aliases: editor-last1, editor1-last, editor-surname, editor-surname1, editor1-surname, editor, editor1.
  • editor: This parameter is used to hold the complete name of a single editor (first and last), or the name of an editorial committee. This parameter should never hold the names of more than one editor. Supports accept-this-as-written markup.
  • editor-first: given or first names of editor, including title(s); example: Firstname Middlename or Firstname M. or Dr. Firstname M., Sr. Do not wikilink—use editor-link instead. Aliases: editor-first1, editor1-first, editor-given, editor-given1, editor1-given.
  • OR: for multiple editors, use editor-last1, editor-first1 through editor-lastn, editor-firstn (Aliases: editorn-last, editor-surnamen or editorn-surname; editorn-first, editor-givenn or editorn-given; editorn). For an individual editor plus an institutional editor, you can use |editor-first1=...|editor-last1=... |editor2=....
  • editor-link: title of existing Wikipedia article about the editor—not the editor's website; do not wikilink. Aliases: editor-link1.
  • OR: for multiple editors, use editor-link1 through editor-linkn (alias editorn-link).
  • name-list-style: accepts a limited list of keywords as value; when set to amp, ampersand, or &, inserts an ampersand between the last two names in a name list; when set to and, inserts the conjunction 'and' between the last two names of a name list; when set to vancdisplays name lists in
    Vancouver style
    when the lists use the last/first forms of name parameters.
• veditors: comma separated list of editor names in
  Vancouver style; enclose corporate or institutional names in doubled parentheses
  . End with etal if appropriate:

  |veditors=Smythe JB, ((Megabux Corp.)), etal

  • editor-linkn and editor-maskn may be used for the individual names in |veditors=, as described above
• Display:

  Use display-editors to control the length of the displayed editor name list and to specify when "et al." is included.

  If authors: Authors are first, followed by the included work, then "In" and the editors, then the main work.

  If no authors: Editors appear before the included work; a single editor is followed by "ed."; multiple editors are followed by "eds."

• mode: Sets element separator, default terminal punctuation, and certain capitalization according to the value provided. For |mode=cs1, element separator and terminal punctuation is a period (.); where appropriate, initial letters of certain words are capitalized ('Retrieved...'). For |mode=cs2, element separator is a comma (,); terminal punctuation is omitted; where appropriate, initial letters of certain words are not capitalized ('retrieved...'). These styles correspond to Citation Style 1 and Citation Style 2 respectively. To override default terminal punctuation use postscript.
• author-mask:
• contributor-mask:
• editor-mask:
• interviewer-mask:
• subject-mask:
• translator-mask:

  Replaces the name of the (first) author with em dashes or text. Set <name>-mask to a numeric value n to set the dash n em spaces wide; set <name>-mask to a text value to display the text without a trailing author separator; for example, "with". The numeric value 0 is a special case to be used in conjunction with <name>-link—in this case, the value of <name>-link will be used as (linked) text. In either case, you must still include the values for all names for metadata purposes. Primarily intended for use with bibliographies or bibliography styles where multiple works by a single author are listed sequentially such as shortened footnotes. Do not use in a list generated by {{reflist}}, <references /> or similar as there is no control of the order in which references are displayed. Mask parameters can take an enumerator in the name of the parameter (e.g. |authorn-mask=) to apply the mask to a specific name.

• display-authors:
• display-contributors:
• display-editors:
• display-interviewers:
• display-subjects:
• display-translators:

  Controls the number of author (or other kind of contributor) names that are displayed. By default, all authors are displayed. To change the displayed number of names, set the parameter to the desired number. For example, |display-authors=2 will display only the first two authors in a citation (and not affect the display of the other kinds of contributors). |display-authors=0 is a special case suppressing the display of all authors including the et al. |display-authors=etal displays all authors in the list followed by et al. Aliases: none.

• postscript: Controls the closing punctuation for a citation; defaults to a period (.); for no terminating punctuation, specify |postscript=none – leaving |postscript= empty is the same as omitting it, but is ambiguous. Additional text, or templates that render more than a single terminating punctuation character, will generate a maintenance message. |postscript= is ignored if quote is defined.

Subscription or registration required

Citations of online sources that require registration or a subscription are acceptable in Wikipedia as documented in

Four access levels can be used:

• access indicator for named identifiers:
  • free: the source is free to read for anyone
• access indicators for url-holding parameters:
  • registration: a free registration with the provider is required to access the source, even if a limited preview, abstract or review may still be available without registration
  • limited: free access is subject to limited trial and a subscription is normally required
  • subscription: the source is only accessible via a paid subscription with the provider of the source ("paywall")

As there are often multiple external links with different access levels in the same citation, each value is attributed to a specific external link.

Access indicators for url-holding parameters

Online sources linked by |url=, |article-url=, |chapter-url=, |contribution-url=, |entry-url=, |map-url=, and |section-url= are presumed to be free-to-read. When they are not free-to-read, editors should mark those sources with the matching access-indicator parameter so that an appropriate icon is included in the rendered citation. Because the sources linked by these URL-holding parameters are presumed to be free-to-read, they are not marked as free. If the registration/limited/subscription access to the source goes dead and is no longer available, then remove the access-indicator parameter and add |archive-url= and |archive-date= values if possible.

URL-holding and access-indicator parameters

URL	Access	Allowed keywords
|url=	|url-access=	registration limited subscription
|article-url=	|article-url-access=
|chapter-url=	|chapter-url-access=
|contribution-url=	|contribution-url-access=
|entry-url=	|entry-url-access=
|map-url=	|map-url-access=
|section-url=	|section-url-access=

For example, this cites a web page that requires registration but not subscription:

{{cite web |url=https://example.com/nifty_data.php |url-access=registration |date=2021-04-15 |title=Nifty example data}}

which renders as:

"Nifty example data". 2021-04-15.

Access indicator for named identifiers

Links inserted by named identifiers are presumed to lie behind a paywall or registration barrier – exceptions listed below. When they are free-to-read, editors should mark those sources with the matching access-indicator parameter so that an appropriate icon is included in the rendered citation. When the sources linked by these named-identifier parameters are not presumed to carry a free-to-read full text (for instance because they're just abstracting services), they may not be marked as limited, registration, or subscription.

Named-identifier and access-indicator parameters

Identifier	Access	Allowed keywords
|bibcode=	|bibcode-access=	free
|doi=	|doi-access=
|hdl=	|hdl-access=
|jstor=	|jstor-access=
|ol=	|ol-access=
|osti=	|osti-access=
|ssrn=	|ssrn-access=
|s2cid=	|s2cid-access=

Some named-identifiers are always free-to-read. For those named identifiers there are no access-indicator parameters; the access level is automatically indicated by the template. These named identifiers are:

• |arxiv=
• |biorxiv=
• |citeseerx=
• |medrxiv=
• |pmc=
• |rfc=

For embargoed pmc that will become available in the future, see pmc-embargo-date.

TemplateData

Error: cs1|2 template name required

See also

{{UF-COinS}}