FS Class E.430
E.430 | ||
---|---|---|
Power supply 3,000 V three-phase 15-16.7 Hz AC | | |
Current pickup(s) | 2× bow collectors | |
Traction motors | 4× 150 hp (110 kW) | |
Transmission | direct |
Career | |
---|---|
Operators | Ferrovia della Valtellina |
Numbers |
|
First run | 1902 |
Preserved | 1 |
The FS Class E.430 locomotives, initially classed as RA 34, were
History
Class E.430 is the first example, worldwide, of an electric locomotive powered by three-phase current. It was built for
Since the Valtellina lines were the first in Italy to use three-phase electric power for the haulage of trains, the E.430 was used from the beginning. The Adriatic Network had commissioned the entire electrification project from the Ganz company in Budapest. The equipment was built under the supervision of Kálmán Kandó, one of the pioneers of three-phase traction in Italy. The electrification work began in 1897, with the establishment of a government commission to experiment with different electrification systems: one with accumulators (Bologna - San Felice and Milan - Monza lines), one with direct current at 650 V from a third rail (Milan - Varese), and finally the three-phase system on the Valtellina line.
The tests of the electric power lines at 3,000 - 3,300 Volt, at frequency 15 - 16.7 Hz, powered by the Campovico
The electric locomotives, built by Ganz and Mavag in 1901 and with a power of 440 kW and a haulage capacity of 300 tons, easily out-performed the steam locomotives of the time. The electric railcars, on the other hand, proved insufficient for hauling passenger trains and, subsequently de-motored, they were transformed into passenger coaches of Class RBz.
From 1928 the locomotives were removed from the Valtellina line and transferred to the stations at
Technical details
The design of the locomotive was unusual. It comprised two half-locomotives coupled back-to-back with a bellows joint in the middle of the cab. This gave the wheel arrangement of Bo+Bo, rather than the more common Bo-Bo bogie system in later years. Front and rear visibility was ensured by three glass panels and there were four more on each side. Windshield wipers and washers were not provided. Each half-locomotive had two axles with leaf springs.
The four 150-horsepower traction motors were mounted coaxially on the axles, with a bellcrank linkage to the wheels, similar to that also used for the Valtellina electric railcars. The wheels and motors were covered by sloping bonnets, each equipped with four doors to allow maintenance. Current collection was by two bow collectors, controlled by groups of four cylindrical springs each.
Brief history of the Valtellina lines
- Colico - Sondrio: inaugurated 16 June 1885, electrified 1901-1902
- Colico - Chiavenna: inaugurated 9 September 1886, electrified 1901-1902
- Lecco - Bellano: inaugurated 1 July 1892, electrified 1901-1902
- Bellano - Colico: inaugurated 1 August 1894, electrified 1901-1902
- Sondrio - Tirano: inaugurated 29 June 1902, electrified after World War I
Preservation
E.430.001 is in the Museo Nazionale Scienza e Tecnologia Leonardo da Vinci in Milan. This is the unit once in service at Fortezza station. It is displayed in its later condition with modified current collectors and three large headlights.
See also
- RA 361–363 the 1904 locomotives of the Valtellina line
References
- Parshall, H. F.; Hobart, H. M. (1907). Electric Railway Engineering. London: Archibald Constable. pp. 326–329. OL 23297005M.
Further reading
- Giovanni Cornolò, Locomotive elettriche FS, Parma, Ermanno Albertelli Editore, 1983, pp. 48–51.
- Michele Mìngari, Gian Franco Ferro, Franco Dell'Amico, Viaggio in trifase. 75 anni di corrente alternata FS, Milano, ACME, 2009, pp. ISBN 978-88-96759-07-3