Life-cycle assessment

Life cycle assessment (LCA), also known as life cycle analysis, is a

An LCA study involves a thorough inventory of the energy and materials that are required across the supply chain and value chain of a product, process or service, and calculates the corresponding emissions to the environment.^[2] LCA thus assesses cumulative potential environmental impacts. The aim is to document and improve the overall environmental profile of the product^[2] by serving as a holistic baseline upon which carbon footprints can be accurately compared.

Widely recognized procedures for conducting LCAs are included in the

Life cycle assessment (LCA) is sometimes referred to synonymously as life cycle analysis in the scholarly and agency report literatures.[5]^[1][6] Also, due to the general nature of an LCA study of examining the life cycle impacts from raw material extraction (cradle) through disposal (grave), it is sometimes referred to as "cradle-to-grave analysis".^[4]

As stated by the National Risk Management Research Laboratory of the

• Compiling an inventory of relevant energy and material inputs and environmental releases
• Evaluating the potential environmental impacts associated with identified inputs and releases
• Interpreting the results to help you make a more informed decision".^[2]

Hence, it is a technique to assess environmental impacts associated with all the stages of a product's life from raw material extraction through materials processing, manufacture, distribution, use, repair and

Therefore, the goal of LCA is to compare the full range of environmental effects assignable to products and services by quantifying all inputs and outputs of material flows and assessing how these material flows affect the environment.[8] This information is used to improve processes, support policy and provide a sound basis for informed decisions.

The term life cycle refers to the notion that a fair,

Despite attempts to standardize LCA, results from different LCAs are often contradictory, therefore it is unrealistic to expect these results to be unique and objective. Thus, it should not be considered as such, but rather as a family of methods attempting to quantify results through a different point-of-view.[10] Among these methods are two main types: Attributional LCA and Consequential LCA.^[11] Attributional LCAs seek to attribute the burdens associated with the production and use of a product, or with a specific service or process, for an identified temporal period.^[12] Consequential LCAs seek to identify the environmental consequences of a decision or a proposed change in a system under study, and thus are oriented to the future and require that market and economic implications must be taken into account.^[12] In other words, Attributional LCA "attempts to answer 'how are things (i.e. pollutants, resources, and exchanges among processes) flowing within the chosen temporal window?', while Consequential LCA attempts to answer 'how will flows beyond the immediate system change in response to decisions?"^[7]

A third type of LCA, termed "social LCA", is also under development and is a distinct approach to that is intended to assess potential social and socio-economic implications and impacts.^[13] Social life cycle assessment (SLCA) is a useful tool for companies to identify and assess potential social impacts along the lifecycle of a product or service on various stakeholders (for example: workers, local communities, consumers).^[14] SLCA is framed by the UNEP/SETAC’s Guidelines for social life cycle assessment of products published in 2009 in Quebec.^[15] The tool builds on the ISO 26000:2010 Guidelines for Social Responsibility and the Global Reporting Initiative (GRI) Guidelines.^[16]

The limitations of LCA to focus solely on the ecological aspects of sustainability, and not the economical or social aspects, distinguishes it from product line analysis (PLA) and similar methods. This limitation was made deliberately to avoid method overload but recognizes these factors should not be ignored when making product decisions.^[4]

Some widely recognized procedures for LCA are included in the

Main ISO phases of LCA

According to standards in the ISO 14040 and 14044, an LCA is carried out in four distinct phases,^{[4][17][page needed][18][page needed]} as illustrated in the figure shown at the above right (at opening of the article). The phases are often interdependent, in that the results of one phase will inform how other phases are completed. Therefore, none of the stages should be considered finalized until the entire study is complete.^[3]

Goal and scope

The ISO LCA Standard requires a series of parameters to be quantitatively and qualitatively expressed, which are occasionally referred to as study design parameters (SPDs). The two main SPDs for an LCA are the Goal and Scope, both which must be explicitly stated. It is recommended that a study uses the keywords represented in the Standard when documenting these details (e.g., "The goal of the study is...") to make sure there is no confusion and ensure the study is being interpreted for its intended use.^[3]

Generally, an LCA study begins with an explicit statement of the goal, which sets out the context of the study and explains how and to whom the results are to be communicated. Per ISO guidelines, the goal must unambiguously state the following items:

1. The intended application
2. Reasons for carrying out the study
3. The audience
4. Whether the results will be used in a comparative assertion released publicly^[3][22]

The goal should also be defined with the commissioner for the study, and it is recommended a detailed description for why the study is being carried out is acquired from the commissioner.^[22]

Following the goal, the scope must be defined by outlining the qualitative and quantitative information included in the study. Unlike the goal, which may only include a few sentences, the scope often requires multiple pages.^[3] It is set to describe the detail and depth of the study and demonstrate that the goal can be achieved within the stated limitations.^[22] Under the ISO LCA Standard guidelines, the scope of the study should outline the following:^[23]

• Product system, which is a collection of processes (activities that transform inputs to outputs) that are needed to perform a specified function and are within the system boundary of the study. It is representative of all the processes in the life cycle of a product or process.^[3][22]
• Functional unit, which defines precisely what is being studied, quantifies the service delivered by the system, provides a reference to which the inputs and outputs can be related, and provides a basis for comparing/analyzing alternative goods or services.^[24] The functional unit is a very important component of LCA and needs to be clearly defined.^[22] It is used as a basis for selecting one or more product systems that can provide the function. Therefore, the functional unit enables different systems to be treated as functionally equivalent. The defined functional unit should be quantifiable, include units, consider temporal coverage, and not contain product system inputs and outputs (e.g., kg CO₂ emissions).^[3] Another way to look at it is by considering the following questions:
  1. What?
  2. How much?
  3. For how long / how many times?
  4. Where?
  5. How well?^[11]
• Reference flow, which is the amount of product or energy that is needed to realize the functional unit.^[22][11] Typically, the reference flow is different qualitatively and quantitatively for different products or systems across the same reference flow; however, there are instances where they can be the same.^[11]
• System boundary, which delimits which processes should be included in the analysis of a product system, including whether the system produces any co-products that must be accounted for by system expansion or allocation.^[25] The system boundary should be in accordance with the stated goal of the study.^[3]
• Assumptions and limitations,^[22] which includes any assumptions or decisions made throughout the study that may influence the final results. It is important these are made transmitted as the omittance may result in misinterpretation of the results. Additional assumptions and limitations necessary to accomplish the project are often made throughout the project and should recorded as necessary.^[7]
• Data quality requirements, which specify the kinds of data that will be included and what restrictions.^[26] According to ISO 14044, the following data quality considerations should be documented in the scope:
  1. Temporal coverage
  2. Geographical coverage
  3. Technological coverage
  4. Precision, completeness, and representativeness of the data
  5. Consistency and reproducibility of the methods used in the study
  6. Sources of data
  7. Uncertainty of information and any recognized data gaps^[22]
• Allocation procedure, which is used to partition the inputs and outputs of a product and is necessary for processes that produce multiple products, or co-products.^[22] This is also known as multifunctionality of a product system.^[11] ISO 14044 presents a hierarchy of solutions to deal with multifunctionality issues, as the choice of allocation method for co-products can significantly impact results of an LCA.^[27] The hierarchy methods are as follows:
  1. Avoid Allocation by Sub-Division - this method attempts to disaggregate the unit process into smaller sub-processes in order to separate the production of the product from the production of the co-product.^[11][28]
  2. Avoid Allocation through System Expansion (or substitution) - this method attempts to expand the process of the co-product with the most likely way of providing the secondary function of the determining product (or reference product). In other words, by expanding the system of the co-product in the most likely alternative way of producing the co-product independently (System 2). The impacts resulting from the alternative way of producing the co-product (System 2) are then subtracted from the determining product to isolate the impacts in System 1.^[11]
  3. Allocation (or partition) based on Physical Relationship - this method attempts to divide inputs and outputs and allocate them based on physical relationships between the products (e.g., mass, energy-use, etc.).^[11][28]
  4. Allocation (or partition) based on Other Relationship (non-physical) - this method attempts to divide inputs and outputs and allocate them based on non-physical relationships (e.g., economic value).^[11][28]
• Impact assessment, which includes an outline of the impact categories identified under interest for the study, and the selected methodology used to calculate the respective impacts. Specifically, life cycle inventory data is translated into environmental impact scores,
  global warming, and eutrophication.^[26]
  As part of the scope, only an overview needs to be provided, as the main analysis on the impact categories is discussed in the Life Cycle Impact Assessment (LCIA) phase of the study.
• Documentation of data, which is the explicit documentation of the inputs/outputs (individual flows) used within the study. This is necessary as most analyses do not consider all inputs and outputs of a product system, so this provides the audience with a transparent representation of the selected data. It also provides transparency for why the system boundary, product system, functional unit, etc. was chosen.[28]

Life cycle inventory (LCI)

Life cycle inventory (LCI) analysis involves creating an inventory of flows from and to nature (ecosphere) for a product system.^[29] It is the process of quantifying raw material and energy requirements, atmospheric emissions, land emissions, water emissions, resource uses, and other releases over the life cycle of a product or process.^[30] In other words, it is the aggregation of all elementary flows related to each unit process within a product system.

To develop the inventory, it is often recommended to start with a flow model of the technical system using data on inputs and outputs of the product system.^[30][31] The flow model is typically illustrated with a flow diagram that includes the activities that are going to be assessed in the relevant supply chain and gives a clear picture of the technical system boundaries.^[31] Generally, the more detailed and complex the flow diagram, the more accurate the study and results.^[30] The input and output data needed for the construction of the model is collected for all activities within the system boundary, including from the supply chain (referred to as inputs from the technosphere).^[31]

According to ISO 14044, an LCI should be documented using the following steps:

1. Preparation of data collection based on goal and scope
2. Data collection
3. Data validation (even if using another work's data)
4. Data allocation (if needed)
5. Relating data to the unit process
6. Relating data to the functional unit
7. Data aggregation^[32][33]

As referenced in the ISO 14044 standard, the data must be related to the functional unit, as well as the goal and scope. However, since the LCA stages are iterative in nature, the data collection phase may cause the goal or scope to change.^[23] Conversely, a change in the goal or scope during the course of the study may cause additional collection of data or removal or previously collected data in the LCI.^[32]

The output of an LCI is a compiled inventory of elementary flows from all of the processes in the studied product system(s). The data is typically detailed in charts and requires a structured approach due to its complex nature.^[34]

When collecting the data for each process within the system boundary, the ISO LCA standard requires the study to measure or estimate the data in order to quantitatively represent each process in the product system. Ideally, when collecting data, a practitioner should aim to collect data from primary sources (e.g., measuring inputs and outputs of a process on-site or other physical means).^[32] Questionnaire are frequently used to collect data on-site and can even be issued to the respective manufacturer or company to complete. Items on the questionnaire to be recorded may include:

1. Product for data collection
2. Data collector and date
3. Period of data collection
4. Detailed explanation of the process
5. Inputs (raw materials, ancillary materials, energy, transportation)
6. Outputs (emissions to air, water, and land)
7. Quantity and quality of each input and output^[35]

Oftentimes, the collection of primary data may be difficult and deemed proprietary or confidential by the owner.^[36] An alternative to primary data is secondary data, which is data that comes from LCA databases, literature sources, and other past studies. With secondary sources, it is often you find data that is similar to a process but not exact (e.g., data from a different country, slightly different process, similar but different machine, etc.).^[37] As such, it is important to explicitly document the differences in such data. However, secondary data is not always inferior to primary data. For example, referencing another work's data in which the author used very accurate primary data.^[32] Along with primary data, secondary data should document the source, reliability, and temporal, geographical, and technological representativeness.

When identifying the inputs and outputs to document for each unit process within the product system of an LCI, a practitioner may come across the instance where a process has multiple input streams or generate multiple output streams. In such case, the practitioner should allocate the flows based on the "Allocation procedure"^[30][32][35] outlined in the previous "Goal and scope" section of this article.

The technosphere is more simply defined as the human-made world, and considered by geologists as secondary resources, these resources are in theory 100% recyclable; however, in a practical sense, the primary goal is salvage.^[38] For an LCI, these technosphere products (supply chain products) are those that have been produced by humans, including products such as forestry, materials, and energy flows.^[39] Typically, they will not have access to data concerning inputs and outputs for previous production processes of the product.^[40] The entity undertaking the LCA must then turn to secondary sources if it does not already have that data from its own previous studies. National databases or data sets that come with LCA-practitioner tools, or that can be readily accessed, are the usual sources for that information.^[41] Care must then be taken to ensure that the secondary data source properly reflects regional or national conditions.^[32]

LCI methods include "process-based LCAs", economic input–output LCA (

The quality of LCI data is typically evaluated with the use of a pedigree matrix. Different pedigree matrices are available, but all contain a number of data quality indicators and a set of qualitative criteria per indicator.[45]^[46][47] There is another hybrid approach integrates the widely used, semi-quantitative approach that uses a pedigree matrix, into a qualitative analysis to better illustrate the quality of LCI data for non-technical audiences, in particular policymakers.^[48]

Life cycle impact assessment (LCIA)

Life cycle inventory analysis is followed by a life cycle impact assessment (LCIA). This phase of LCA is aimed at evaluating the potential environmental and human health impacts resulting from the elementary flows determined in the LCI. The ISO 14040 and 14044 standards require the following mandatory steps for completing an LCIA:^[49][50][51]

Mandatory

• Selection of impaction categories, category indicators, and characterization models. The ISO Standard requires that a study selects multiple impacts that encompass "a comprehensive set of environmental issues". The impacts should be relevant to the geographical region of the study and justification for each chosen impact should be discussed.^[50] Often times in practice, this is completed by choosing an already existing LCIA method (e.g., TRACI, ReCiPe, AWARE, etc.).^[49][52]
• Classification of inventory results. In this step, the LCI results are assigned to the chosen impact categories based on their known environmental effects. In practice, this is often completed using LCI databases or LCA software.^[49] Common impact categories include Global Warming, Ozone Depletion, Acidification, Human Toxicity, etc.^[53]
• Characterization, which quantitatively transforms the LCI results within each impact category via "characterization factors" (also referred to as equivalency factors) to create "impact category indicators."^[50] In other words, this step is aimed at answering "how much does each result contribute to the impact category?"^[49] A main purpose of this step is to convert all classified flows for an impact into common units for comparison. For example, for Global Warming Potential, the unit is generally defined as CO₂-equiv or CO₂-e (CO₂ equivalents) where CO₂ is given a value of 1 and all other units are converted respective to their related impact.^[50]

In many LCAs, characterization concludes the LCIA analysis, as it is the last compulsory stage according to ISO 14044.^{[18][page needed][50]} However, the ISO Standard provides the following optional steps to be taken in addition to the aforementioned mandatory steps:

Optional

• Normalization of results. This step aims to answer "Is that a lot?" by expressing the LCIA results in respect to a chosen reference system.^[49] A separate reference value is often chosen for each impact category, and the rationale for the step is to provide temporal and spatial perspective and to help validate the LCIA results.^[50] Standard references are typical impacts per impact category per: geographical zone, inhabitant of geographical zone (per person), industrial sector, or another product system or baseline reference scenario.^[49]
• Grouping of LCIA results. This step is accomplished by sorting or ranking the LCIA results (either characterized or normalized depending on the prior steps chosen) into a single group or several groups as defined within the goal and scope.^[49][50] However, grouping is subjective and may be inconsistent across studies.
• Weighting of impact categories. This step aims to determine the significance of each category and how important it is relative to the others. It allows studies to aggregate impact scores into a single indicator for comparison.^[49] Weighting is highly subjective and as it is often decided based on the interested parties' ethics.^[50] There are three main categories of weighting methods: the panel method, monetization method, and target method.^[53] ISO 14044 generally advises against weighting, stating that "weighting, shall not be used in LCA studies intended to be used in comparative assertions intended to be disclosed to the public".^{[18][page needed]} If a study decides to weight results, then the weighted results should always be reported together with the non-weighted results for transparency.^[34]

Life cycle impacts can also be categorized under the several phases of the development, production, use, and disposal of a product. Broadly speaking, these impacts can be divided into first impacts, use impacts, and end of life impacts. First impacts include extraction of raw materials, manufacturing (conversion of raw materials into a product), transportation of the product to a market or site, construction/installation, and the beginning of the use or occupancy.^[54][55] Use impacts include physical impacts of operating the product or facility (such as energy, water, etc.), and any maintenance, renovation, or repairs that are required to continue to use the product or facility.^[56][57] End of life impacts include demolition and processing of waste or recyclable materials.^[58]

Interpretation

Life cycle interpretation is a systematic technique to identify, quantify, check, and evaluate information from the results of the life cycle inventory and/or the life cycle impact assessment. The results from the inventory analysis and impact assessment are summarized during the interpretation phase. The outcome of the interpretation phase is a set of conclusions and recommendations for the study. According to ISO 14043,^[17][59] the interpretation should include the following:

• Identification of significant issues based on the results of the LCI and LCIA phases of an LCA
• Evaluation of the study considering completeness, sensitivity and consistency checks
• Conclusions, limitations and recommendations^[59]

A key purpose of performing life cycle interpretation is to determine the level of confidence in the final results and communicate them in a fair, complete, and accurate manner. Interpreting the results of an LCA is not as simple as "3 is better than 2, therefore Alternative A is the best choice".^[60] Interpretation begins with understanding the accuracy of the results, and ensuring they meet the goal of the study. This is accomplished by identifying the data elements that contribute significantly to each impact category, evaluating the sensitivity of these significant data elements, assessing the completeness and consistency of the study, and drawing conclusions and recommendations based on a clear understanding of how the LCA was conducted and the results were developed.^[61][59]

Specifically, as voiced by M.A. Curran, the goal of the LCA interpretation phase is to identify the alternative that has the least cradle-to-grave environmental negative impact on land, sea, and air resources.^[62]

LCA uses

LCA was primarily used as a comparison tool, providing informative information on the environmental impacts of a product and comparing it to available alternatives.^[63] Its potential applications expanded to include marketing, product design, product development, strategic planning, consumer education, ecolabeling and government policy.^[64]

ISO specifies three types of classification in regard to standards and environmental labels:

• Type I environmental labelling requires a third-party certification process to verify a products compliance against a set of criteria, according to ISO 14024.
• Type II environmental labels are self-declared environmental claims, according to ISO 14021.
• Type III environmental declaration, also known as environmental product declaration (EPD), uses LCA as a tool to report the environmental performance of a product, while conforming to the ISO standards 14040 and 14044.^[65]

EPDs provide a level of transparency that is being increasingly demanded through policies and standards around the world. They are used in the built environment as a tool for experts in the industry to compose whole building life cycle assessments more easily, as the environmental impact of individual products are known.^[66]

Data analysis

A life cycle analysis is only as accurate and valid as is its basis set of data.^[67] There are two fundamental types of LCA data–unit process data, and environmental input-output (EIO) data.^[68] A unit process data collects data around a single industrial activity and its product(s), including resources used from the environment and other industries, as well as its generated emissions throughout its life cycle.^[69] EIO data are based on national economic input-output data.^[70]

In 2001, ISO published a technical specification on data documentation, describing the format for life cycle inventory data (ISO 14048).^[71] The format includes three areas: process, modeling and validation, and administrative information.^[72]

When comparing LCAs, the data used in each LCA should be of equivalent quality, since no just comparison can be done if one product has a much higher availability of accurate and valid data, as compared to another product which has lower availability of such data.^[73]

Moreover, time horizon is a sensitive parameter and was shown to introduce inadvertent bias by providing one perspective on the outcome of LCA, when comparing the toxicity potential between petrochemicals and biopolymers for instance.^[74] Therefore, conducting sensitivity analysis in LCA are important to determine which parameters considerably impact the results, and can also be used to identify which parameters cause uncertainties.^[75]

Data sources used in LCAs are typically large databases.^[76] Common data sources include:^[77]

As noted above, the inventory in the LCA usually considers a number of stages including materials extraction, processing and manufacturing, product use, and product disposal.^[1][2] When an LCA is done on a product across all stages, the stage with the highest environmental impact can be determined and altered.^[79] For example, woolen-garment was evaluated on its environmental impacts during its production, use and end-of-life, and identified the contribution of fossil fuel energy to be dominated by wool processing and GHG emissions to be dominated by wool production.^[80] However, the most influential factor was the number of garment wear and length of garment lifetime, indicating that the consumer has the largest influence on this products' overall environmental impact.^[80]

Variants

Cradle-to-grave or life cycle assessment

Cradle-to-grave is the full life cycle assessment from resource extraction ('cradle'), to manufacturing, usage, and maintenance, all the way through to its disposal phase ('grave').^[81] For example, trees produce paper, which can be recycled into low-energy production cellulose (fiberised paper) insulation, then used as an energy-saving device in the ceiling of a home for 40 years, saving 2,000 times the fossil-fuel energy used in its production. After 40 years the cellulose fibers are replaced and the old fibers are disposed of, possibly incinerated. All inputs and outputs are considered for all the phases of the life cycle.^[82]

Cradle-to-gate

Cradle-to-gate is an assessment of a partial product life cycle from resource extraction (cradle) to the factory gate (i.e., before it is transported to the consumer). The use phase and disposal phase of the product are omitted in this case. Cradle-to-gate assessments are sometimes the basis for

Cradle-to-cradle is a specific kind of cradle-to-grave assessment, where the end-of-life disposal step for the product is a recycling process. It is a method used to minimize the environmental impact of products by employing sustainable production, operation, and disposal practices and aims to incorporate social responsibility into product development.^[84][85] From the recycling process originate new, identical products (e.g., asphalt pavement from discarded asphalt pavement, glass bottles from collected glass bottles), or different products (e.g., glass wool insulation from collected glass bottles).^[86]

Allocation of burden for products in open loop production systems presents considerable challenges for LCA. Various methods, such as the avoided burden approach have been proposed to deal with the issues involved.^[87]

Gate-to-gate

Gate-to-gate is a partial LCA looking at only one value-added process in the entire production chain. Gate-to-gate modules may also later be linked in their appropriate production chain to form a complete cradle-to-gate evaluation.^[88]

Well-to-wheel

Well-to-wheel (WtW) is the specific LCA used for

Quantitative values of greenhouse gas emissions calculated with the WTW or with the LCA method can differ, since the LCA is considering more emission sources. For example, while assessing the GHG emissions of a battery electric vehicle in comparison with a conventional internal combustion engine vehicle, the WTW (accounting only the GHG for manufacturing the fuels) concludes that an electric vehicle can save around 50–60% of GHG.^[94] On the other hand, using a hybrid LCA-WTW method, concludes that GHG emission savings are 10-13% lower than the WTW results, as the GHG due to the manufacturing and the end of life of the battery are also considered.^[95]

Economic input–output life cycle assessment

Economic input–output LCA (

While a conventional LCA uses many of the same approaches and strategies as an Eco-LCA, the latter considers a much broader range of ecological impacts. It was designed to provide a guide to wise management of human activities by understanding the direct and indirect impacts on ecological resources and surrounding ecosystems. Developed by Ohio State University Center for resilience, Eco-LCA is a methodology that quantitatively takes into account regulating and supporting services during the life cycle of economic goods and products. In this approach services are categorized in four main groups: supporting, regulating, provisioning and cultural services.[98]

Exergy-based LCA

Exergy of a system is the maximum useful work possible during a process that brings the system into equilibrium with a heat reservoir.^[99][100] Wall^[101] clearly states the relation between exergy analysis and resource accounting.^[102] This intuition confirmed by DeWulf^[103] and Sciubba^[104] lead to Exergo-economic accounting^[105] and to methods specifically dedicated to LCA such as Exergetic material input per unit of service (EMIPS).^[106] The concept of material input per unit of service (MIPS) is quantified in terms of the second law of thermodynamics, allowing the calculation of both resource input and service output in exergy terms. This exergetic material input per unit of service (EMIPS) has been elaborated for transport technology. The service not only takes into account the total mass to be transported and the total distance, but also the mass per single transport and the delivery time.^[106]

Life cycle energy analysis

Life cycle energy analysis (LCEA) is an approach in which all energy inputs to a product are accounted for, not only direct energy inputs during manufacture, but also all energy inputs needed to produce components, materials and services needed for the manufacturing process.^[107] With LCEA, the total life cycle energy input is established.^[108]

Energy production

It is recognized that much energy is lost in the production of energy commodities themselves, such as

If materials are incinerated during the disposal process, the energy released during burning can be harnessed and used for

Energy efficiency is arguably only one consideration in deciding which alternative process to employ, and should not be elevated as the only criterion for determining environmental acceptability.^[118] For example, a simple energy analysis does not take into account the renewability of energy flows or the toxicity of waste products.^[119] Incorporating "dynamic LCAs", e.g., with regard to renewable energy technologies—which use sensitivity analyses to project future improvements in renewable systems and their share of the power grid—may help mitigate this criticism.^[120][121]

In recent years, the literature on life cycle assessment of

A problem that arises when using the energy analysis method is that different energy forms—

Datasets can also consist of options, activities, or approaches, rather than of products – for example one dataset assesses PET bottle waste management options in Bauru, Brazil.^[133] There are also LCA databases about buildings – complex products – which a 2014 study compared.^[134]

LCA dataset platforms

There are some initiatives to develop, integrate, populate, standardize, quality control, combine and maintain such datasets or LCAs^[135][136] – for example:

• The goal of the LCA Digital Commons Project of the U.S.
  National Agricultural Library is "to develop a database and tool set intended to provide data for use in LCAs of food, biofuels, and a variety of other bioproducts".^[137]
• The Global LCA Data Access network (GLAD) by the UN's Life Cycle Initiative is a "platform which allows to search, convert and download datasets from different life cycle assessment dataset providers".[138]
• The BONSAI project "aims to build a shared resource where the community can contribute to data generation, validation, and management decisions" for "
  open source toolchain capable of supporting LCA calculations".^[139] With product footprints they refer to the goal of "reliable, unbiased sustainability information on products".^[140]

Datasets that are suboptimal in accuracy or have gaps can be, temporarily until the complete data is available or permanently, be patched or optimized by various methods such as mechanisms for "selection of a dataset that represents the missing dataset that leads in most cases to a much better approximation of environmental impacts than a dataset selected by default or by geographical proximity"[141] or machine learning.^[142][131]

Integration in systems and systems theory

Life cycle assessments can be integrated as routine processes of systems, as input for modeled future socio-economic pathways, or, more broadly, into a larger context^[143] (such as qualitative scenarios).

For example, a study estimated the environmental benefits of microbial protein within a future socio-economic pathway, showing substantial

Life cycle assessments, including as product/technology analyses, can also be integrated in analyses of potentials, barriers and methods to shift or regulate consumption or production.

The life cycle perspective also allows considering losses and lifetimes of rare goods and services in the economy. For example, the usespans of, often scarce, tech-critical metals were found to be short as of 2022.^[145] Such data could be combined with conventional life cycle analyses, e.g., to enable life-cycle material/labor cost analyses and long-term economic viability or sustainable design.^[146] One study suggests that in LCAs, resource availability is, as of 2013, "evaluated by means of models based on depletion time, surplus energy, etc."^[147]

Broadly, various types of life cycle assessments (or commissioning such) could be used in various ways in various types of societal decision-making,^{[148][143][149]} especially because financial markets of the economy typically do not consider life cycle impacts or induced societal problems in the future and present—the "externalities" to the contemporary economy.^[150]

Critiques

Life cycle assessment is a powerful tool for analyzing commensurable aspects of quantifiable systems.^[151] Not every factor, however, can be reduced to a number and inserted into a model. Rigid system boundaries make accounting for changes in the system difficult.^[152] This is sometimes referred to as the boundary critique to systems thinking. The accuracy and availability of data can also contribute to inaccuracy. For instance, data from generic processes may be based on averages, unrepresentative sampling, or outdated results.^[153] This is especially the case for the use and end of life phases in the LCA.^[154] Additionally, social implications of products are generally lacking in LCAs. Comparative life cycle analysis is often used to determine a better process or product to use. However, because of aspects like differing system boundaries, different statistical information, different product uses, etc., these studies can easily be swayed in favor of one product or process over another in one study and the opposite in another study based on varying parameters and different available data.^[155] There are guidelines to help reduce such conflicts in results but the method still provides a lot of room for the researcher to decide what is important, how the product is typically manufactured, and how it is typically used.^[156][157]

An in-depth review of 13 LCA studies of wood and paper products^[158] found a lack of consistency in the methods and assumptions used to track carbon during the product lifecycle. A wide variety of methods and assumptions were used, leading to different and potentially contrary conclusions—particularly with regard to carbon sequestration and methane generation in landfills and with carbon accounting during forest growth and product use.^[159]

Moreover, the fidelity of LCAs can vary substantially as various data may not be incorporated, especially in early versions: for example, LCAs that do not consider regional emission information can under-estimate the life cycle environmental impact.^[160]

See also

References