Montgomery 12
M12 | |
| Development | |
|---|---|
| Designer | centerboard down |
| Hull | |
| Type | monohull |
| Construction | fiberglass |
| LOA | 12.20 ft (3.72 m) |
| LWL | 10.00 ft (3.05 m) |
| Beam | 4.83 ft (1.47 m) |
| Hull appendages | |
| Keel/board type | centerboard |
| Rudder(s) | transom-mounted rudder |
| Rig | |
| Rig type | Bermuda rig |
| Sails | |
| Sailplan | fractional rigged sloop |
| Total sail area | 91.00 sq ft (8.454 m2) |
| ] | |
The Montgomery 12 is an American
Production
The design was the first boat built by Montgomery Marine Products in Dana Point, California, United States, but it is now out of production.[1][3][4]
Design
The Montgomery 12 is a recreational
The boat has a draft of 3.00 ft (0.91 m) with the centerboard extended and 10 in (25 cm) with it retracted, allowing beaching or ground transportation on a trailer.[1][3]
The design has a hull speed of 4.24 kn (7.85 km/h).[3]
See also
References
- ^ a b c d McArthur, Bruce (2020). "Montgomery 12 sailboat". sailboatdata.com. Archived from the original on 17 August 2021. Retrieved 17 August 2021.
- ^ McArthur, Bruce (2021). "Lyle C. Hess 1912 - 2002". sailboatdata.com. Archived from the original on 7 January 2021. Retrieved 17 August 2021.
- ^ a b c d e Sea Time Tech, LLC (2022). "Montgomery 12". sailboat.guide. Archived from the original on 18 April 2022. Retrieved 18 April 2022.
- ^ McArthur, Bruce (2021). "Montgomery Marine Products". sailboatdata.com. Archived from the original on 27 June 2021. Retrieved 17 August 2021.