Template:Chembox Properties

Ammonia
Properties
Chemical formula	NH3
Molar mass	17.031 g·mol−1
Appearance	Colourless gas
Odor	Strong pungent odor
Density	0.86 kg·m−3 (1.013 bar at boiling point); 0.73 kg·m−3 (1.013 bar at 15 °C); 681.9 kg·m−3 at −33.3 °C (liquid)
Melting point	−77.73 °C (−107.91 °F; 195.42 K)
Boiling point	−33.34 °C (−28.01 °F; 239.81 K)
Solubility in water	47% (0 °C); 31% (25 °C); 28% (50 °C);
Solubility	Soluble in chloroform, ether, ethanol, methanol
log P	logP
Vapor pressure	8573 hPa
Acidity (pKa)	32.5 (−33 °C), 10.5 (DMSO)
Basicity (pKb)	4.75
Refractive index (nD)	1.3327
Viscosity	0.276 cP (−40 °C)
	Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa). Infobox references

Template documentation[view] [edit] [history] [purge]

This template is used on approximately 14,000 pages and changes may be widely noticed. Test changes in the template's

talk page

before implementing them.

Usage

This box can be used as a complete section inside the {{chembox}}. Copy the left column into an existing Chembox.

| Section2={{Chembox Properties
| Properties_ref = 
| Formula = 
| Formula_ref = 
| Formula_Comment = 
| C= | H= | N= <!--(etc)-->
| Formula_Charge =
| MolarMass =
| MolarMassRound =
| MolarMass_ref = 
| MolarMass_notes = 
| Appearance = 
| Odor = | Odour = 
| Density = 
| MeltingPt =
| MeltingPtC =
| MeltingPtF =
| MeltingPtK =
| MeltingPt_ref =
| MeltingPt_notes =
| BoilingPt =
| BoilingPtC =
| BoilingPtF =
| BoilingPtK =
| BoilingPt_ref =
| BoilingPt_notes =
| CriticalTP =
| SublimationConditions = 
| Solubility = 
| SolubilityProduct = 
| SolubilityProductAs = 
| SolubleOther = 
| Solvent = 
| Solubility1 = 
| Solvent1 = 
| Solubility2 = 
| Solvent2 = 
| Solubility3 = 
| Solvent3 = 
| Solubility4 = 
| Solvent4 = 
| Solubility5 = 
| Solvent5 =
| Solubility6 = 
| Solvent6 =
| CMC =
| HLB =
| LogP = 
| VaporPressure = 
| HenryConstant = 
| AtmosphericOHRateConstant = 
| pKa = 
| pKb = 
| ConjugateAcid =
| ConjugateBase =
| IsoelectricPt = 
| ElectricalResistivity =
| LambdaMax = 
| Absorbance = 
| BandGap = 
| ElectronMobility = 
| SpecRotation = 
| MagSus = 
| ThermalConductivity = 
| RefractIndex = 
| Viscosity = 
| CriticalRelativeHumidity = 
| Dipole = 
| OrbitalHybridisation = 
| SpecificSurfaceArea = 
| PoreVolume = 
| AveragePoreSize = 
  }}

{{Chembox Properties}} - incomplete list
Reference
Chemical formula
 reference
 comment
 per element (alternative input)
 molecule charge
MolarMass
MolarMassRound
MolarMass_ref
MolarMass_notes
Appearance
Odor, Odour
Density
MeltingPt, any text
Number, in Celsius. Is converted to F and K
 Also possible: MeltingPtF=, or MeltingPtK=
 
 
 
BoilingPt, any text
Number, in Celsius. Is converted to F and K
 Also possible: BoilingPtF=, or BoilingPtK=
 
 
Critical temperature and pressure
SublimationConditions
Solubility in water (Aqueous solution)
SolubilityProduct
SolubilityProductAs
SolubleOther
Solvent
Solubility1
[[{{{Solvent1}}}]]
Solubility2
[[{{{Solvent2}}}]]
Solubility3
[[{{{Solvent3}}}]]
Solubility4
[[{{{Solvent4}}}]]
Solubility5
[[{{{Solvent5}}}]]
Solubility6
[[{{{Solvent6}}}]]
 Critical micelle concentration (units must be manually inserted)
 Hydrophilic-lipophilic balance (units must be manually inserted)
LogP
VaporPressure
HenryConstant
AtmosphericOHRateConstant
pKa
pKb
Conjugate acid
Conjugate base
IsoelectricPt
ElectricalResistivity
LambdaMax
Absorbance
BandGap
ElectronMobility
SpecRotation
MagSus
ThermalConductivity
RefractIndex
Viscosity
CriticalRelativeHumidity
Dipole
OrbitalHybridisation
SpecificSurfaceArea
PoreVolume
AveragePoreSize

Chemical formula

Chemical formula by element:

 | C= | H= | N= | O= (etc., 118 elements)
 | Formula_Charge= 
 | Formula_ref=
 | Formula_Comment

OR hardcoded (formula input will show unedited)

 | Formula= 
 | Formula_ref=
 | Formula_Comment=

Temperatures

Temperatures for both for the melting point and boiling point can be entered in multiple ways. |MeltingPt= and |BoilingPt= allow any textual input. E.g.:

|MeltingPt=Unknown shows: Unknown

When supplying a temperature value (the numerical value in either °C, °F or K), the infobox will calculate and present all three temperatures. Only one of the three _C, _F, _K values may be entered. E.g.:

|MeltingPtC=100 shows: 100 °C; 212 °F; 373 K

To show a temperature range, simply add the corresponding _CH high value (_FH, _KH). E.g.:

|MeltingPtF=50 |MeltingPtFH=75 shows 10 or 24 °C; 50 or 75 °F; 283 or 297 K

All available temperature parameters:

| MeltingPt
| MeltingPtC
| MeltingPtF
| MeltingPtK
| MeltingPt_ref
| MeltingPt_notes

| BoilingPt
| BoilingPtC
| BoilingPtF
| BoilingPtK
| BoilingPt_ref
| BoilingPt_notes

Any text, shown literally
Prefix before calculations
Temperature in Celsius; numerical
Temperature in Fahrenheit; numerical
Temperature in Kelvins; numerical
Reference
Any text added as a postfix

Any text, shown literally
Prefix
Temperature in Celsius; numerical
Temperature in Fahrenheit; numerical
Temperature in Kelvins; numerical
Reference
Any text added as a postfix

Example

Ammonia (and some exemplary additions)

{{Chembox
| Name = Ammonia
|Section2 = {{Chembox Properties
| Formula = NH<sub>3</sub>
| MolarMass = 17.031{{nbsp}}g·mol<sup>−1</sup>
| Appearance = Colourless gas
| Odor = Strong pungent odor
| Density = 0.86&nbsp;kg·m<sup>−3</sup> (1.013{{nbsp}}bar at boiling point)<br
/>0.73&nbsp;kg·m<sup>−3</sup> (1.013{{nbsp}}bar at 15&nbsp;°C)<br
/>681.9&nbsp;kg·m<sup>−3</sup> at −33.3&nbsp;°C (liquid)
| MeltingPtC = −77.73
| BoilingPtC = −33.34
| Solubility = {{ubl
 | 47% (0&nbsp;°C)
 | 31% (25&nbsp;°C)
 | 28% (50&nbsp;°C)<ref>{{cite book |url=https://books.google.com/?id=0fT4wfhF1AsC&pg=PA17 |page=17 |title=Handbook of inorganic compounds |last1=Perry |first1=Dale L. |last2=Phillips |first2=Sidney L. |publisher=CRC Press |year=1995 |isbn=0-8493-8671-3 }}</ref>
 }}
| SolubleOther = soluble in [[chloroform]], [[ether]], [[ethanol]], [[methanol]]
| Solvent =
| pKa = 32.5 (−33&nbsp;°C),<ref>Perrin, D. D.; ''Ionisation Constants of Inorganic Acids and Bases in Aqueous Solution'', 2nd ed., Oxford: Pergamon Press, '''1982'''</ref> 10.5 (DMSO)
| pKb = 4.75
| RefractIndex = 1.3327
| Viscosity = 0.276&nbsp;cP (−40&nbsp;°C)
| VaporPressure = 8573&nbsp;hPa
| LogP = logP
  }}
}}

Tracking category

Category:Pages using Chembox with unknown parameters (0)

TemplateData

TemplateData documentation used by VisualEditor and other tools

See a monthly parameter usage report for Template:Chembox Properties in articles based on its TemplateData.

TemplateData for Chembox Properties

Adds a subsection to {{Chembox}}. To be used: |Section2={{Chembox Properties|...}}

Template parameters[Edit template data]
Parameter		Description	Type	Status
ExactMass	`ExactMass`	no description	Unknown	optional

References

ISBN 0-8493-8671-3
.

^ Perrin, D. D.; Ionisation Constants of Inorganic Acids and Bases in Aqueous Solution, 2nd ed., Oxford: Pergamon Press, 1982

The above
testcases (edit) pages.
Add categories to the /doc subpage. Subpages of this template
.

Retrieved from "https://en.wikipedia.org/w/index.php?title=Template:Chembox_Properties&oldid=1097088278"

[1] ISBN 0-8493-8671-3
.

[2] Perrin, D. D.; Ionisation Constants of Inorganic Acids and Bases in Aqueous Solution, 2nd ed., Oxford: Pergamon Press, 1982

[1]

[2]