Lighter
A lighter is a portable device which creates a controlled
History
The first lighters were converted
The development of
Using Carl Auer von Welsbach's flint, companies like Ronson were able to develop practical and easy to use lighters. In 1910, Ronson released the first Pist-O-Liter, and in 1913, the company developed its first lighter, called the "Wonderlite", which was a permanent match style of lighter.[4]
During WWI soldiers started to create lighters out of empty cartridge cases. During that time one of the soldiers came up with a means to insert a chimney cap with holes in it to make it more windproof.[citation needed]
The Zippo lighter and company were invented and founded by George Grant Blaisdell in 1932. The Zippo was noted for its reliability, "Life Time Warranty" and marketing as "Wind-Proof".[5] Most early Zippos used naphtha as a fuel source.
In the 1950s, there was a switch in the fuel of choice from naphtha to
Around the end of the 20th century most of the world's lighters were produced in France, the United States, China, and Thailand.[7]
Operation
Earlier lighters mostly burned "lighter fluid", naphtha, saturating a cloth wick and fibre packing to absorb the fluid and prevent it from leaking. The wick is covered by an enclosed top to prevent the volatile liquid from evaporating, which is opened to operate the lighter, and extinguishes the flame when closed after use.
Later lighters use liquefied butane gas as fuel, with a valved orifice that allows gas to escape at a controlled rate when the lighter is used.[citation needed]
Older lighters were usually ignited by a spark created by striking metal against a lighter flint. Later piezo ignition was introduced: a piezoelectric crystal is compressed on pressing a button, generating an electric spark. In naphtha lighters, the liquid is sufficiently volatile, and flammable vapour is present as soon as the top of the lighter is opened. Butane lighters combine the striking action with the opening of the valve to release gas. The spark ignites the flammable gas causing a flame to come out of the lighter which continues until either the top is closed (naphtha type), or the valve is released (butane type).[citation needed]
A metal enclosure with air holes, designed to allow mixing of fuel and air while making the lighter less sensitive to wind, usually surrounds the flame. The gas jet in butane lighters mixes air and gas by using Bernoulli's principle, requiring air holes in that are much smaller and further from the flame.[citation needed]
Specialized "windproof" butane lighters are manufactured for demanding conditions such as shipboard, high altitude, and wet climates. Some dedicated models double as synthetic rope cutters. Such lighters are often far hotter than normal lighters (those that use a "soft flame") and can burn in excess of 1,100 °C (2,010 °F). The windproof capabilities are not achieved from higher pressure fuel; windproof lighters use the same fuel (butane) as standard lighters, and therefore develop the same vapour pressure. Instead, windproof lighters
Other types
Jet lighter
As opposed to lighters of the naphtha or standard butane type (whether refillable or disposable), which combust incompletely and thus create a sooty, orange "safety" flame, jet lighters produce a blue flame that in some cases is almost invisible and invariably burns at a far higher temperature. The spark in such lighters is almost always produced by an electric arc (as seen below), but some jet lighters burn with incomplete combustion. Disadvantages of the jet lighter include a "roaring" noise in operation, as well as higher fuel consumption.[citation needed]
Electric arc lighter
Arc lighters use a spark to create a plasma conduit between electrodes, which is then maintained by a lower voltage. The arc is then applied to a flammable substance to cause ignition.[8]
Automobile lighter
Some vehicles are equipped with an electric lighter located on the dashboard or in the well between the front seats. Its electric heating element becomes hot in seconds upon activation.
Match lighter
Not to be confused with the meaning of match as in
Permanent match
A typical form of lighter is the permanent match or everlasting match, consisting of a naphtha fuel-filled metal shell and a separate threaded metal rod assembly—the "match"—serving as the striker and wick. This "metal match" is stored screwed into the fuel storage compartment: the shell.
The fuel-saturated striker/wick assembly is unscrewed to remove, and scratched against a flint on the side of the case to create a spark. Its concealed wick catches fire, resembling a match. The flame is extinguished by blowing it out before screwing the "match" back into the shell, where it absorbs fuel for the next use. An advantage over other naphtha lighters is that the fuel compartment is sealed shut with a rubber o-ring, which slows or stops fuel evaporation.[citation needed]
Flameless lighter
A flameless lighter is a safe alternative to traditional lighters. The flameless lighter uses an enclosed heating element which glows, so that the device does not produce an open flame. Typical flameless heating elements are an electrically heated wire or an artificial coal.[citation needed]
Flameless lighters are designed for use in any environment where an open flame, conventional lighters or matches are not permitted. The flameless lighter is used in many environments such as prisons and detention facilities, oil and gas facilities, mental health facilities, nursing homes, airports and night clubs/restaurants.[citation needed]
Many advertised so-called flameless lighters are not flameless at all, but the flame is invisible (such as a windproof lighter). If a piece of paper can easily be ignited, it is probably not a true flameless lighter and may not be safe in hazardous environments where smoking is confined to specific safe areas.
The flameless lighter was invented by brothers Douglas Hammond and David Hammond in the UK in 1966 under the "Ciglow" name.[9]
Catalytic lighter
Catalytic lighters use methanol or methylated spirits as fuel and a thin platinum wire which heats up in the presence of flammable vapours and produces a flame.[10]
ISO Standards
The International Standard EN ISO 9994:2002[11] and the European standard EN 13869:2002 are two primary references.[12]
The ISO establishes non-functional specifications on quality, reliability, safety of lighters, and appropriate test procedures. For instance, a lighter should generate flame only through positive action on the part of the user, two or more independent actions by the user, or an actuating force greater than or equal to 15 Newtons. The standard also specifies other safety features, such as the lighter's maximum flame height and its resistance to elevated temperatures, dropping, and damages from continuous burning. However, the standard does not include child resistance specifications.
The European standard EN 13869:2002 establishes child-resistance specifications and defines as novelty lighters those that resemble another object commonly recognized as appealing to children younger than 51 months, or those that have entertaining audio or animated effects.[12]
As matches, lighters, and other heat sources are the leading causes of fire deaths for children,[13] many jurisdictions, such as the EU,[14] have prohibited the marketing of novelty or non-child resistant lighters. Examples of child resistance features include the use of a smooth or shielded spark wheel. Many people remove these child resistance features, making the lighter easier to ignite.
In 2005 the fourth edition of the ISO standard was released (ISO9994:2005). The main change to the 2004 Standard is the inclusion of specifications on
See also
References
- ISBN 975-08-0578-X.
- . Retrieved 21 May 2010.
- ^ Metrowebukmetro (3 March 2009). "Weird Fact of the Day (that you probably didn't know) – May to June 2009". Metro. Retrieved 23 December 2021.
- ^ "Dutch Ronson Collector's Club, 'History of the Ronson Lighter'". Finepipes.com. Archived from the original on 26 July 2010. Retrieved 21 May 2010.
- ^ "The Early History of Zippo: The Birth of the Zippo Lighter". Lightermall.com. 2020. Archived from the original on 27 November 2020.
- ^ Jason Virga (2006). "The Laureate Lighter – A chronological history of the amazing invention". Bugstores.com. Retrieved 25 September 2015.
- ^ United States International Trade Commission, "Disposable Lighters from the People's Republic of China and Thailand", Bug Stores Lighters. 1994.
- ^ Courtney Linder (2 March 2021). "Plasma Lighters Are Better Than Butane—Here's the Proof". Popular Mechanics. Hearst Magazine Media. Retrieved 12 July 2022.
- ^ "About Ciglow". Ciglow.co.uk. Retrieved 26 September 2015.
- ^ Frank Dutton. "Making Catalytic Lighters Work". Toledo-bend.com. Archived from the original on 16 September 2015. Retrieved 26 September 2015.
- ^ ISO, ed. (2005). Safety specification (PDF). Lighters. Geneva: ISO. p. 32. ISO 9994:2005(E). Archived from the original (PDF) on 12 March 2006.
- ^ a b The European Committee for Standardization, ed. (2002). Child-resistance for lighters — Safety requirements and test methods. Lighters. Brussels: CEN. EN 13869:2002.
- ^ US Fire Administration (12 March 2008). "Match and Lighter Safety". FEMA. Archived from the original on 6 March 2008.
- ^ European Commission (2006). "2006/502/EC: Commission Decision of 11 May 2006 requiring Member States to take measures to ensure that only lighters which are child-resistant are placed on the market and to prohibit the placing on the market of novelty lighters". pp. 41–45. OJ L 198, 20.7.2006.