ReFS

Source: Wikipedia, the free encyclopedia.
Not to be confused with ReiserFS.

ReFS
petabytes[3]
Features
AttributesYes
Transparent
compression		No
Data deduplicationYes, since v3.2 debuting in 2016 v1709[4]
Copy-on-writeYes
Other
Supported
operating systems
Websitelearn.microsoft.com/en-US/windows-server/storage/refs/refs-overview

Resilient File System (ReFS),

proprietary file system introduced with Windows Server 2012 with the intent of becoming the "next generation" file system after NTFS
.

ReFS was designed to overcome problems that had become significant over the years since NTFS was conceived, which are related to how data storage requirements have changed. These requirements arose from two major changes in storage systems and usage – the size of storage in use (

continual reliability. As a result, the file system needs to be self-repairing (to prevent disk checking from being impractically slow or disruptive), along with abstraction or virtualization between physical disks and logical volumes
.

The key design advantages of ReFS include automatic

logical volumes
(unrelated to the physical sizes of the used drives).

Comparison with NTFS

Major new features

Improved reliability for on-disk structures

ReFS uses

petabytes, and a maximum volume size of 35 petabytes.[3]

Built-in resilience

ReFS employs an

allocation units,[9] in which case the file update strategy also implements allocation-on-write for file data; this is controlled by a new "integrity" attribute applicable to both files and directories. If file data or metadata become corrupt, the file can be deleted without taking the whole volume offline for maintenance, and then be restored from the backup. As a result of built-in resiliency, administrators do not need to periodically run error-checking tools such as CHKDSK when using ReFS. In contrast, NTFS only calculates checksum for metadata, the check for sectors is done by storage hardware (such as sector CRC-32 command of SATA and NVMe).[10]

Compatibility with existing APIs and technologies

ReFS supports only a subset of NTFS features, and only supports Win32 APIs that are "widely adopted". It does not require new system APIs, and most file system filters continue to work with ReFS volumes.

Storage Spaces,[2] a storage virtualization layer that allows data mirroring and striping, as well as sharing storage pools between machines.[12] ReFS resiliency features enhance the mirroring feature provided by Storage Spaces and can detect whether any mirrored copies of files become corrupt using a data scrubbing process,[8]
which periodically reads all mirror copies and verifies their checksums, then replaces bad copies with good ones.

Microsoft Windows and Windows Server include ReFSUtil, a command-line utility that can be used to diagnose heavily damaged ReFS volumes, identify remaining files, and copy those files to another volume.[13]

Removed features

Some NTFS features are not implemented in ReFS. These include

extended attributes, and disk quotas.[7][2][14] Dynamic disks with mirrored or striped volumes are replaced with mirrored or striped storage pools provided by Storage Spaces; however, automated error-correction is only supported on mirrored spaces. Data deduplication was missing in early versions of ReFS.[2] It was implemented in v3.2, debuting in Windows Server v1709.[4]

Support for

alternate data streams and hard links was initially not implemented in ReFS. In Windows 8.1 64-bit and Server 2012 R2, the file system reacquired support for alternate data streams, with lengths of up to 128K, and automatic correction of corruption when integrity streams are used on parity spaces.[15] ReFS had initially been unsuitable for Microsoft SQL Server instance allocation due to the absence of alternate data streams.[16]
Hard links were introduced with preview versions of Windows Server 2022 but are not yet available in Windows 11.

Implementations

ReFS was initially added to

extended attributes
. Some of these were re-implemented in later versions of ReFS.

In early versions (2012–2013), ReFS was similar to or slightly faster than NTFS in most tests,[17] but far slower when full integrity checking was enabled, a result attributed to the relative newness of ReFS.[18][self-published source][19][self-published source]

The ability to create ReFS volumes was removed in Windows 10's 2017 Fall Creators Update for all editions except Enterprise and Pro for Workstations.[5][why?]

Starting with Windows Server 2022 and Windows 11 build 22557, the boot environment natively supports ReFS, allowing the system to be installed and run in a special way on a volume formatted with ReFS v3. If it is a volume formatted with ReFS v1, it cannot be booted with ReFS.[20]

Starting with Windows 11 build 22621.2338, ReFS is re-introduced via a Dev Drive feature; allowing fixed storage drives and VHDs to be formatted as ReFS, with special file and

Microsoft Defender
policies added during use.

The

cluster size of a ReFS volume is either 4 KB or 64 KB.[21]

History

Server 2016

At the Storage Developer Conference 2015, a Microsoft developer presented enhancements of ReFS expected to be released with

I/O.[22]

Server 2022

Windows Server 2022 (using ReFS version 3.7) supports file-level snapshots.[3]

Windows Insider Preview 22H2 and 23H2 (builds 226** and 25***) support ReFS volume compression using LZ4 and zstd algorithms.[24]

Versions

ReFS has some different versions, with various degrees of compatibility between operating system versions. Aside from development versions of the filesystem, usually, later operating system versions can mount filesystems created with earlier OS versions (backwards compatibility). Some features may not be compatible with the feature set of the OS. The version, cluster size and other features of the filesystem can be queried with the command fsutil fsinfo refsinfo volumename.

  • 1.1: The original version, formatted by Windows Server 2012.
  • 1.2: Default version if formatted by Windows 8.1, Windows 10 RTM to v1607, Windows Server 2012 R2, and when specified ReFSv1 on Windows Server 2016. Can use alternate data streams under Windows Server 2012 R2.
  • 2.2: Default version formatted by Windows 10 Preview build 10049 or earlier. Could not be mounted in 10061 and later.
  • 2.0: Default version formatted by Windows Server 2016 TP2 and TP3. Could not be mounted in Windows 10 Build 10130 and later, or Windows Server 2016 TP4 and later.
  • 3.0: Default version formatted by Windows Server 2016 TP4 and TP5.
  • 3.1: Default version formatted by Windows Server 2016 RTM.
  • 3.2: Default version formatted by Windows 10 v1703 and Windows Server Insider Preview build 16237. Can be formatted with Windows 10 Insider Preview 15002 or later (though only became the default somewhere between 15002 and 15019). Supports deduplication in the server version.
  • 3.3: Default version formatted by Windows 10 Enterprise v1709 (ReFS volume creation ability removed from all editions except Enterprise and Pro for Workstations starting with build 16226; read/write ability remains[5]) and Windows Server version 1709 (starting with Windows 10 Enterprise Insider Preview build 16257 and Windows Server Insider Preview build 16257).
  • 3.4: Default version formatted by Windows 10 Pro for Workstations/Enterprise v1803 and newer, also server versions (including the long-time support version Windows Server 2019). For Windows 10 Pro 22H2 build 19045 and previous, ReFS is unavailable.
  • 3.5: Default version formatted by Windows 11 Enterprise Insider Preview (build 19536 or newer); adds support for hard links (only on fresh formatted volume; not supported on volumes upgraded from previous versions).[3]
  • 3.6: Default version formatted by Windows 11 Enterprise Insider Preview (build 21292 or newer) and Windows Server Insider Preview (build 20282 or newer)
  • 3.7: Default version formatted by Windows 11 Enterprise Insider Preview (build 21313 or newer) and Windows Server Insider Preview (build 20303 or newer). Also, the version shipped with the final releases of Windows Server 2022 and Windows 11. Added file-level snapshot (only available in Server 2022).
  • 3.9: Default version formatted by Windows 11 Enterprise Insider Preview (build 22598 or newer) and Windows Server Insider Preview (build 25099 or newer). Added post process compression with LZ4 and ZSTD and transparent decompression.
  • 3.10: Default version formatted by Windows 11 Enterprise Insider Preview and Windows Server Insider Preview (build 25324 or newer).
  • 3.12: Default version formatted by Windows 11 Enterprise Insider Preview (build 26002 or newer).
  • 3.14: Default version formatted by Windows 11 (build 26047 and newer).[25]

Known problems

Issues identified or suggested for ReFS, when running on Storage Spaces, include:

  • REFSutil does not work on 3.7 (Windows 2022)
  • Adding thin-provisioned ReFS on top of Storage Spaces (according to a 2012 pre-release article) can fail in a non-graceful manner, in which the volume without warning becomes inaccessible or unmanageable.[26] This can happen, for example, if the physical disks underlying a storage space became too full. Smallnetbuilder comments that, in such cases, recovery could be "prohibitive" as a "breakthrough in theory" is needed to identify storage space layouts and recover them, which is required before any ReFS recovery of file system contents can be started; therefore it recommends using backups as well.[26]
  • Thin-provisioned ReFS on top of Storage Spaces, occasionally if the ReFS partition is extended to the full size of the thin-volume. When later extending the thin-volume size the ReFS partition may fail to extend to the thin-volume size. Once it fails to extend the partition you can never again extend the partition, no matter how large you extend the thin-volume size too. The workaround is to never extend the ReFS partition to the full size of the thin-volume, always leave a few GB at the end of the volume unassigned. The problem still exists in Server 2022. It is thought that during the extension of the partition, it writes values into the partition table that corrupt the table when using the full size of the thin-volume, preventing any further expansions. That data is still intact and the ReFS partition works normally. A solution is to create a new volume and ReFS partition and copy out of the old ReFS and into the new ReFS requiring double storage during the copy before the old volume can be deleted.
  • Thin-provisioned volume formatted with ReFS eventually expands the thin volume to the full size of the ReFS formatted size, nullifying the reason to use a thin volume on Windows 10. The more use the partition sees the quicker the volume is expanded, even if the data is mostly static. Less used drives still expand on Windows 10 but not at the same rate. When using an NTFS formatted volume on top of a thin volume does not experience the same expansion. For example, 4 TB ReFS two-way mirror 99% static data(data logs) 1.11 TB used, data does not change once added, data added once a month, storage spaces used the entire 8 TB of storage(should be around 2.2 TB used in storage spaces). Same storage space different thin volume formatted with ReFS, two-way mirror single data write, but data is used less frequently and added to less frequently 257 GB of data, storage spaces using 7.77 TB. thin volume NTFS partition, used in the same manner as the 257 GB partition, but only using 601 GB. 7-month window.
  • Even when Storage Spaces is not thinly provisioned, ReFS may still be unable to dependably correct all file errors in some situations, because Storage Spaces operates on blocks and not files, and therefore some files may potentially lack necessary blocks or recovery data if part of the storage space is not working correctly. As a result, disk and data addition and removal may be impaired, and redundancy conversion becomes difficult or impossible.[citation needed]
  • The Microsoft Store cannot install apps on a ReFS volume.[27][self-published source]

Comparison with other file systems

Like ReFS, ZFS, Bcachefs, and Btrfs are designed to integrate data protection, snapshots, and background error correction.

In 2012,

Phoronix wrote an analysis[28] of ReFS vs Btrfs. At the time, their features were similar, with both supporting checksums, RAID-like use of multiple disks, and error correction. However, ReFS lacked copy-on-write
snapshots and compression, both found in Btrfs and ZFS.

In 2014, BetaNews wrote a review of ReFS and assessed its readiness for production use.[29] The review concluded that ReFS had at least some advantages over two file systems then available for file servers running Unix-like operating systems, ZFS and ReiserFS.

ZFS (used in

RAM for online deduplication. However, online deduplication was not enabled by default in ZFS and was not supported at the time by ReFS (it has since been added), so not enabling ZFS online deduplication yielded a more even comparison between the two file systems as ZFS then has a memory requirement of only a few hundred megabytes.[30]

Reverse engineering and internals

As of November 2019[update], Microsoft has not published any specifications for ReFS, nor have any working open-source drivers been made. A third-party open-source project to document ReFS is on GitHub.[31][32]

Paragon Software Group provides a closed-source driver for Windows and Linux.

See also

References

  1. ^ Snover, Jeffrey (1 August 2012). "Windows Server 2012 released to manufacturing!". Windows Server Blog. Microsoft Corporation. Archived from the original on 22 December 2015. Retrieved 2 September 2014.
  2. ^
    MSDN blogs. Archived from the original
    on 31 July 2012. Retrieved 20 January 2013.
  3. ^ a b c d e f "Resilient File System (ReFS) overview". Microsoft. Archived from the original on 25 September 2020. Retrieved 22 September 2020.
  4. ^ a b Sarkar, Dona (13 July 2017). "Announcing Windows Server Insider Preview Build 16237". Windows Experience Blog. Microsoft. Archived from the original on 23 July 2017. Retrieved 20 July 2017.
  5. ^ a b c "Windows 10 features and functionality removed in Windows 10". docs.microsoft.com. 30 January 2020. Archived from the original on 18 November 2019. Retrieved 23 February 2020. Creation ability will be available in the following editions only: Windows 10 Enterprise and Windows 10 Pro for Workstations. Creation ability will be removed from all other editions. All other editions will have Read and Write ability.
  6. ^ Lucas, Martin (1 January 2013). "Windows Server 2012: Does ReFS replace NTFS? When should I use it?". Ask Premier Field Engineering (PFE) Platforms. Microsoft. TechNet blogs. Archived from the original on 2 June 2013. Retrieved 20 January 2013.
  7. ^
    CBS Interactive
    . Retrieved 31 July 2024.
  8. ^
    CBS Interactive. Archived
    from the original on 21 May 2013. Retrieved 20 January 2013.
  9. ^ gawatu. "ReFS integrity streams". learn.microsoft.com. Retrieved 13 April 2025.
  10. ^ NVM Express (TM) Command Set Specification
  11. MSDN Library. Microsoft. 8 November 2012. Archived
    from the original on 4 May 2013. Retrieved 21 January 2013.
  12. MSDN blogs. Archived from the original
    on 6 January 2012. Retrieved 18 January 2013.
  13. ^ "ReFSUtil | Microsoft Docs". Archived from the original on 27 August 2021. Retrieved 13 July 2021.
  14. ^ Windows Server 2012: Does ReFS replace NTFS? When should I use it? Archived 2 June 2013 at the Wayback Machine – Martin Lucas, TechNet
  15. ^ "Resilient File System Overview". Microsoft Docs. Microsoft. 29 February 2012. Retrieved 24 August 2022.
  16. Penton Media. Archived
    from the original on 14 July 2018. Retrieved 9 May 2020.
  17. ^ "ReFS vs NTFS Benchmark – First Ever – Exclusive Technology News". FirstEver.eu. Archived from the original on 8 July 2014.
  18. ^ "Relative Performance of Parity .vs. Mirror in Storage Spaces". Baris Eris's Blog. 22 October 2012. Archived from the original on 22 June 2014. Retrieved 17 June 2014.
  19. ^ Eckert, Jason (25 February 2014). "Microsoft ReFS vs Oracle ZFS – Fight!". Archived from the original on 13 January 2017. Retrieved 12 January 2017.
  20. ^ Windows 11 on ReFS, archived from the original on 10 July 2022, retrieved 10 July 2022
  21. ^ "Storage at Microsoft: Cluster size recommendations for ReFS and NTFS". 13 January 2017. Retrieved 22 August 2022.
  22. ^ a b J. R. Tipton. "ReFS v2 – Cloning, projecting, and moving data" (PDF). Retrieved 20 May 2023.
  23. ^ "Block Cloning". Microsoft Docs. Microsoft. 7 January 2021. Retrieved 20 May 2023.
  24. ^ REFS_COMPRESSION_FORMATS - NTIFS.h Windows SDK Insider Preview Archived 14 May 2022 at the Wayback Machine build 22621
  25. ^ https://x.com/PhantomOfEarth/status/1756023763643027568
  26. ^ a b Pakhomova, Elena (8 August 2012). "Data Recovery Tales: When Windows Storage Spaces Go Bad". Archived from the original on 30 July 2016. Retrieved 17 June 2014.
  27. ^ "What I learned after 30 minutes with ReFS". Ctrl blog. 18 May 2017. Archived from the original on 19 May 2017. Retrieved 30 May 2017.
  28. ^ "Microsoft's ReFS File-System: Competitor To Btrfs?". phoronix.com. Archived from the original on 8 September 2016. Retrieved 14 September 2016.
  29. ^ "Windows Storage Spaces and ReFS: Is it time to ditch RAID for good?". BetaNews. 15 January 2014. Archived from the original on 31 January 2014. Retrieved 17 June 2014.
  30. ^ "How To Size Main Memory for ZFS Deduplication". www.oracle.com. Retrieved 24 August 2022.
  31. ^ "libyal/libfsrefs". GitHub. 18 October 2019. Archived from the original on 9 February 2019. Retrieved 11 November 2019.
  32. ^ "ReFS documentation project - PDF document of the ReFS filing system (direct link)". GitHub. Archived from the original on 10 July 2022. Retrieved 28 June 2020.
Retrieved from "https://en.wikipedia.org/w/index.php?title=ReFS&oldid=1285340283"
This page is based on the copyrighted Wikipedia article: ReFS. Articles is available under the CC BY-SA 3.0 license; additional terms may apply.Privacy Policy