Metric prefix

Source: Wikipedia, the free encyclopedia.
(Redirected from
Ronto-
)

A metric prefix is a unit prefix that precedes a basic unit of measure to indicate a multiple or submultiple of the unit. All metric prefixes used today are decadic. Each prefix has a unique symbol that is prepended to any unit symbol. The prefix kilo-, for example, may be added to gram to indicate multiplication by one thousand: one kilogram is equal to one thousand grams. The prefix milli-, likewise, may be added to metre to indicate division by one thousand; one millimetre is equal to one thousandth of a metre.

Decimal multiplicative prefixes have been a feature of all forms of the metric system, with six of these dating back to the system's introduction in the 1790s. Metric prefixes have also been used with some non-metric units. The SI prefixes are metric prefixes that were standardised for use in the International System of Units (SI) by the International Bureau of Weights and Measures (BIPM) in resolutions dating from 1960 to 2022.[1][2] Since 2009, they have formed part of the ISO/IEC 80000 standard. They are also used in the Unified Code for Units of Measure (UCUM)

List of SI prefixes

The BIPM specifies twenty-four prefixes for the International System of Units (SI).

Prefix Base 10 Decimal English word Adoption
[nb 1][4]
Name Symbol Short scale Long scale
quetta Q 1030 1000000000000000000000000000000 nonillion quintillion 2022
ronna R 1027 1000000000000000000000000000 octillion quadrilliard 2022
yotta Y 1024 1000000000000000000000000 septillion quadrillion 1991
zetta Z 1021 1000000000000000000000 sextillion trilliard 1991
exa E 1018 1000000000000000000 quintillion trillion 1975
peta P 1015 1000000000000000 quadrillion billiard 1975
tera T 1012 1000000000000 trillion billion 1960
giga G 109 1000000000 billion milliard 1960
mega M 106 1000000 million 1873
kilo k 103 1000 thousand 1795
hecto h 102 100 hundred 1795
deca da 101 10 ten 1795
100 1 one
deci d 10−1 0.1 tenth 1795
centi c 10−2 0.01 hundredth 1795
milli m 10−3 0.001 thousandth 1795
micro μ 10−6 0.000001 millionth 1873
nano n 10−9 0.000000001 billionth milliardth 1960
pico p 10−12 0.000000000001 trillionth billionth 1960
femto f 10−15 0.000000000000001 quadrillionth billiardth 1964
atto a 10−18 0.000000000000000001 quintillionth trillionth 1964
zepto z 10−21 0.000000000000000000001 sextillionth trilliardth 1991
yocto y 10−24 0.000000000000000000000001 septillionth quadrillionth 1991
ronto r 10−27 0.000000000000000000000000001 octillionth quadrilliardth 2022
quecto q 10−30 0.000000000000000000000000000001 nonillionth quintillionth 2022
Notes
  1. ^ Prefixes adopted before 1960 already existed before SI. The introduction of the CGS system was in 1873.

First uses of prefixes in SI date back to definition of kilogram after the French Revolution at the end of the 18th century. Several more prefixes have gone into use be by the 1947th IUPAC's 14th International Conference of Chemistry,[5] before being officially adopted for the first time in 1960.[6]

The most recent prefixes adopted were ronna-, quetta-, ronto-, and quecto- in 2022, after a proposal from British metrologist Richard J. C. Brown. The large prefixes ronna- and quetta- were adopted in anticipation of needs from data science, and because unofficial prefixes that did not meet SI requirements were already circulating. The small prefixes were added as well even without such a driver in order to maintain symmetry. After these adoptions, all Latin letters have now been used for prefixes or units.[7]

Rules

  • Each prefix name has a symbol that is used in combination with the symbols for units of measure. For example, the symbol for kilo- is k, and is used to produce km, kg, and kW, which are the SI symbols for kilometre, kilogram, and kilowatt, respectively. Except for the early prefixes of kilo-, hecto-, and deca-, the symbols for the prefixes for multiples are uppercase letters, and those for the prefixes for submultiples are lowercase letters.[8]
  • All of the metric prefix symbols are made from upper- and lower-case Latin letters except for the symbol for micro, which is uniquely a Greek letter "μ".
  • Like the numbers they combine with, SI units and unit symbols are never shown in italics. The prefixes and their symbols are always prefixed to the symbol without any intervening space or punctuation.[9] This distinguishes a prefixed unit symbol from the product of unit symbols, for which a space or mid-height dot as separator is required.
  • Prefixes corresponding to an integer power of one thousand are generally preferred, and the prefixes for tens (deci-, deca-) and hundreds (cent-, hecto-) are disfavoured. Hence 100 m is preferred over 1 hm (hectometre) or 10 dam (decametres). The prefixes deci- and centi-, and less frequently hecto- and deca-, are commonly used for everyday purposes; the centimetre (cm) is especially common. Some modern building codes require that the millimetre be used in preference to the centimetre, because "use of centimetres leads to extensive usage of decimal points and confusion".
    hectopascals
    .
  • Prefixes may not be used in combination on a single symbol. This includes the case of the base unit kilogram, which already contains a prefix. For example, milligram (mg) is used instead of microkilogram (μkg).
  • In the arithmetic of measurements having units, the units are treated as multiplicative factors to values. In the product of multiple units, each individual unit prefix must be evaluated as a separate numeric multiplier and then combined with the others.
  • A prefix symbol attached to a unit symbol is included when the unit is raised to a power. For example, km2 is km × km, not km × m.

Usage

Examples

  • The mass of the Earth is approximately 6 Rg (ronnagrams).[11]
  • The mass of an electron is approximately 1 rg (rontogram).[11][a]

Examples of powers of units with metric prefixes

Examples with prefixes and powers

  • 5 mV × 5 mA = 5×10−3 V × 5×10−3 A = 25×10−6 V⋅A = 25 μW.
  • 5.00 mV + 10 μV = 5.00 mV + 0.01 mV = 5.01 mV.
  • 5 cm5×10−2 m5 × 0.01 m = 0.05 m.
  • 9 km29 × (103 m)29 × (103)2 × m29×106 m29 × 1000000 m29000000 m2.
  • 3 MW = 3×106 W = 3 × 1000000 W = 3000000 W.

Typesetting

There is an old extended ASCII symbol ("µ", Unicode U+00B5) for micro for use when the Greek letter "μ" (U+03BC) is unavailable.[b]

The LaTeX typesetting system features an SIunitx package in which the units of measurement are spelled out, for example, \SI{3}{\tera\hertz} formats as "3 THz".[13]

Application to units of measurement

The use of prefixes can be traced back to the introduction of the metric system in the 1790s, long before the 1960 introduction of the SI.[citation needed] The prefixes, including those introduced after 1960, are used with any metric unit, whether officially included in the SI or not (e.g., millidynes and milligauss). Metric prefixes may also be used with non-metric units.[citation needed]

Metric units

Mass

The units

milligram, microgram, and smaller are commonly used for measurement of mass. However, megagram, gigagram, and larger are rarely used; tonnes (and kilotonnes, megatonnes, etc.) or scientific notation are used instead. The megagram does not share the risk of confusion that the tonne has with other units with the name "ton".[citation needed
]

The kilogram is the only base unit of the International System of Units that includes a metric prefix.[citation needed]

Volume

The litre (equal to a cubic decimetre), millilitre (equal to a cubic centimetre), microlitre, and smaller are common. In Europe, the centilitre is often used for liquids, and the decilitre is used less frequently. Bulk agricultural products, such as grain, beer and wine, are often measured in hectolitres (each 100 litres in size).[citation needed]

Larger volumes are usually denoted in kilolitres, megalitres or gigalitres, or else in cubic metres (1 cubic metre = 1 kilolitre) or cubic kilometres (1 cubic kilometre = 1 teralitre). For scientific purposes, the cubic metre is usually used.[citation needed]

Length

The kilometre, metre, centimetre, millimetre, and smaller units are common. The decimetre is rarely used. The micrometre is often referred to by the older non-SI name

light years, and parsecs; the astronomical unit is mentioned in the SI standards as an accepted non-SI unit.[citation needed
]

Time

Prefixes for the SI standard unit second are most commonly encountered for quantities less than one second. For larger quantities, the system of minutes (60 seconds), hours (60 minutes) and days (24 hours) is accepted for use with the SI and more commonly used. When speaking of spans of time, the length of the day is usually standardised to 86400 seconds so as not to create issues with the irregular leap second.[citation needed]

Larger multiples of the second such as kiloseconds and megaseconds are occasionally encountered in scientific contexts, but are seldom used in common parlance. For long-scale scientific work, particularly in astronomy, the Julian year or annum is a standardised variant of the year, equal to exactly 31557600 seconds (365+14 days). The unit is so named because it was the average length of a year in the Julian calendar. Long time periods are then expressed by using metric prefixes with the annum, such as megaannum or gigaannum.[citation needed]

Angle

The SI unit of angle is the

arc-minutes and arc-seconds, see some scientific use.[citation needed
]

Temperature

Official policy also varies from common practice for the degree Celsius (°C). NIST states:[14] "Prefix symbols may be used with the unit symbol °C and prefix names may be used with the unit name degree Celsius. For example, 12 m°C (12 millidegrees Celsius) is acceptable." In practice, it is more common for prefixes to be used with the kelvin when it is desirable to denote extremely large or small absolute temperatures or temperature differences. Thus, temperatures of star interiors may be given in units of MK (megakelvins), and molecular cooling may be described in mK (millikelvins).[citation needed]

Energy

In use the joule and kilojoule are common, with larger multiples seen in limited contexts. In addition, the kilowatt-hour, a composite unit formed from the kilowatt and hour, is often used for electrical energy; other multiples can be formed by modifying the prefix of watt (e.g. terawatt-hour).[citation needed]

There exist a number of definitions for the non-SI unit, the calorie. There are gram calories and kilogram calories. One kilogram calorie, which equals one thousand gram calories, often appears capitalised and without a prefix (i.e. Cal) when referring to "dietary calories" in food.[15] It is common to apply metric prefixes to the gram calorie, but not to the kilogram calorie: thus, 1 kcal = 1000 cal = 1 Cal.

Non-metric units

Metric prefixes are widely used outside the metric SI system. Common examples include the

ka, Ma, and Ga.[16]

Official policies about the use of SI prefixes with non-SI units vary slightly between the International Bureau of Weights and Measures (BIPM) and the American National Institute of Standards and Technology (NIST). For instance, the NIST advises that 'to avoid confusion, prefix symbols (and prefix names) are not used with the time-related unit symbols (names) min (minute), h (hour), d (day); nor with the angle-related symbols (names) ° (degree), ′ (minute), and ″ (second),[14] whereas the BIPM adds information about the use of prefixes with the symbol as for arcsecond when they state: "However astronomers use milliarcsecond, which they denote mas, and microarcsecond, μas, which they use as units for measuring very small angles."[17]

Non-standard prefixes

decimal mark in Germany
is a comma.

Obsolete metric prefixes

Some of the prefixes formerly used in the metric system have fallen into disuse and were not adopted into the SI.

CGPM conference
in 1960.

Other metric prefixes used historically include hebdo- (107) and micri- (10−14).

Double prefixes

Double prefixes have been used in the past, such as micromillimetres or millimicrons (now

gigatonnes), hectokilometres (now 100 kilometres) and the derived adjective hectokilometric (typically used for qualifying the fuel consumption measures).[22]
These are not compatible with the SI.

Other obsolete double prefixes included "decimilli-" (10−4), which was contracted to "dimi-"[23] and standardised in France up to 1961.

There are no more letters of the Latin alphabet available for new prefixes (all the unused letters are already used for units). As such, Richard J. C. Brown (who proposed the prefixes adopted for 10±27 and 10±30) has proposed a reintroduction of compound prefixes (e.g. kiloquetta- for 1033) if a driver for prefixes at such scales ever materialises, with a restriction that the last prefix must always be quetta- or quecto-. This usage is not currently approved by the BIPM.[7][24][25]

Similar symbols and abbreviations

In written English, the symbol K is often used informally to indicate a multiple of thousand in many contexts. For example, one may talk of a 40K salary (40000), or call the Year 2000 problem the Y2K problem. In these cases, an uppercase K is often used with an implied unit (although it could then be confused with the symbol for the kelvin temperature unit if the context is unclear). This informal postfix is read or spoken as "thousand" or "grand", or just "k".

The financial and general news media mostly use m or M, b or B, and t or T as abbreviations for million, billion (109) and trillion (1012), respectively, for large quantities, typically currency[26] and population.[27]

The

millilitre
.

For nearly a century, engineers used the abbreviation MCM to designate a "thousand

kcmil has been adopted as the official designation of a thousand circular mils, but the designation MCM still remains in wide use. A similar system is used in natural gas sales in the United States: m (or M) for thousands and mm (or MM) for millions of British thermal units or therms, and in the oil industry,[28] where MMbbl is the symbol for "millions of barrels". This usage of the capital letter M for "thousand" is from Roman numerals, in which M means 1000.[29]

Binary prefixes

In some fields of information technology, it has been common to designate non-decimal multiples based on powers of 1024, rather than 1000, for some SI prefixes (kilo-, mega-, giga-), contrary to the definitions in the International System of Units (SI). The SI does not permit the metric prefixes to be used in this conflicting sense.[30] This practice was once sanctioned by some industry associations, including JEDEC. The International Electrotechnical Commission (IEC) standardised the system of binary prefixes (kibi-, mebi-, gibi-, etc.) for this purpose.[31][c]

See also

Footnotes

  1. ^ me = 9.1093837015(28)×10−31 kg[12]
  2. ^ On Microsoft Windows systems there are two choices: Either Alt+230 or Alt+0181 will yield the micro-symbol µ. With macOS systems, it is ⌥ Opt+Y or ⌥ Opt+m; and with Linux systems, it is Ctrl+⇧ Shift+u b5space.
  3. ^ The names and symbols of the binary prefixes standardised by the IEC include:
    • kibi (Ki) = 210 = 1024,
    • mebi (Mi) = 220 = 10242 = 1048576,
    • gibi (Gi) = 230 = 10243 = 1073741824,
    etc.

References

  1. ^ "Four Resolutions". Bipm.org. Retrieved 2012-03-01.
  2. ^ "List of Resolutions for the 27th meeting of the General Conference on Weights and Measures" (PDF). 2022-11-18. Retrieved 2022-11-18.
  3. – via www.nature.com.
  4. ^ "archive.ph". archive.ph.
  5. ^ UIC-IUC, Comptes rendus de la 14eme Conférence, Londres, 17–24 juillet 1947 (id.).
  6. ^ "Archive.ph".
  7. ^
    S2CID 253671538
    . Retrieved 2022-11-21.
  8. ^ "Metric Prefixes and SI Units". learn.sparkfun.com. tutorials. Retrieved 2020-01-26.
  9. ^ "SI Unit rules and style conventions checklist".
  10. ^ Metric Design Guide (PDF) (Report). Public Buildings Service. U.S. General Services Administration. September 1995. PBS-PQ260. Archived from the original (PDF) on 2011-12-15. Retrieved 2018-04-21 – via National Institute of Building Sciences.
  11. ^ a b "Earth weighs in at six ronnagrams as new prefixes picked for big and small", the Guardian, 2022-11-18
  12. ^ "2018 CODATA Value: electron mass". The NIST Reference on Constants, Units, and Uncertainty. NIST. 2019-05-20. Retrieved 2019-05-20.
  13. ^ a b Thompson, Ambler; Taylor, Barry N. (March 2008), "Special Publication 811", NIST (2008 ed.), retrieved 2018-06-21
  14. ^ Conn, Carole; Len Kravitz. "Remarkable Calorie". University of New Mexico. Retrieved 2017-05-22.
  15. ^ "SI Brochure: The International System of Units (SI)". International Bureau of Weights and Measures. Retrieved 2017-03-05.
  16. ^ 29th Congress of the United States, Session 1 (1866-05-13). "H.R. 596, An Act to authorize the use of the metric system of weights and measures". Archived from the original on 2015-07-05.
  17. ^ Brewster, David (1830). The Edinburgh Encyclopædia. Vol. 12. Edinburgh, UK: William Blackwood, John Waugh, John Murray, Baldwin & Cradock, J. M. Richardson. p. 494. Retrieved 2015-10-09.
  18. ^ Brewster, David (1832). The Edinburgh Encyclopaedia. Vol. 12 (1st American ed.). Joseph and Edward Parker. Retrieved 2015-10-09.
  19. ^ "(section) La Loi Du 18 Germinal An 3" (in French). histoire.du.metre.free.fr. Retrieved 2015-10-12.
  20. ^ Rowlett, Russ (2008) [2000]. "millimicro-". How Many? A Dictionary of Units of Measurement. University of North Carolina at Chapel Hill. Archived from the original on 2016-08-29. Retrieved 2016-08-29.
  21. . Retrieved 2015-10-09. (a translation of the French original Esprit et bon usage du système métrique, 1965)
  22. .
  23. .
  24. ^ "Obama unveils $3.8T budget proposal". Canadian Broadcasting Corporation. Associated Press. 2012-02-13. Retrieved 2012-03-01.
  25. ^ "More than 65M Flock to Discovery's Planet Earth". Multichannel.com. Retrieved 2012-03-01.
  26. ^ "Purcell, P (2007). Disambiguating M. PESA News 88". Pesa.com.au. Retrieved 2012-03-01.
  27. ^ "What is the difference between MCM and kcmil?". Reference.com. 2015-08-04. Retrieved 2016-09-05.
  28. ^ International Electrotechnical Commission (January 2010). "IEC 60050 – International Electrotechnical Vocabulary – Details for IEV number 112-01-27". Retrieved 2011-06-19.

External links