TOG2

Coordinates: 50°41′44″N 2°14′37″W / 50.69553°N 2.24371°W / 50.69553; -2.24371
Source: Wikipedia, the free encyclopedia.

50°41′44″N 2°14′37″W / 50.69553°N 2.24371°W / 50.69553; -2.24371

Heavy Tank, TOG II
mild steel
Main
armament
Ordnance QF 17-pounder
Secondary
armament
7.92 mm Besa machine gun
EnginePaxman-Ricardo 12-cylinder diesel-electric
600 hp (450 kW)
Power/weight7.5 hp/t
Transmission2 electric motors
Suspensionunsprung
torsion bar (TOG II*)
Operational
range
50 mi (80 km)[2]
Maximum speed 8.5 mph (13.7 km/h) (achieved)[2]
15 mph (24 km/h) (theoretical)
[4][page needed]

The TOG2, officially known as the Heavy Tank, TOG II, was a British

TOG I design, only a single prototype was built before its termination.[5]

History

The second design to come out of the Special Vehicle Development Committee (nicknamed "The Old Gang" as it was made up of people who had worked on the original British tanks of the First World War) the TOG 2 was similar to the

Foster's of Lincoln, the prototype ran for the first time in March 1941. In April 1941 an enquiry was made by the Deputy Director-General of Tanks and Transport to the English Electric Company see if 100 could be produced.[6] In June 1941 the Minister of Supply enquired about the production of 50 tanks.[6] Neither of these enquires lead to production orders.[6]

The design included a 6-pounder gun and side

sponsons. For "initial trials" it was fitted with a mockup turret with dummy guns - a 2-pdr gun, 3-inch howitzer and a Besa machine gun - together with a 3-inch howitzer in the hull.[7] The second turret fitted was simplified mounting a QF 3-inch 16 cwt anti-tank gun derived from the current anti-aircraft gun.[citation needed
].

In 1942 the tank was given a turret that was under development for the Cruiser Mk VIII Challenger tank design with the QF 28-pounder (94 mm) gun.[8] The turret "in modified form" was used on the Challenger.[8] The planned sponsons were never fitted.[9]

Although equipped with the same electro-mechanical drive as originally fitted to the TOG 1, the TOG 2 used twin generators and no problems were reported. It was modified to include, among other things, a change from the unsprung tracks to a torsion bar suspension and went through successful trials in May 1943. No further development occurred, although a revised version, the TOG 2 (R) was proposed. The 'R' would have been 6 ft (1.8 m) shorter, used torsion bar suspension and had no sponsons.[9]

The single TOG 2 prototype in the TOG II* configuration can be seen at The Tank Museum.[5]

See also

References

  1. ^ a b c White p68
  2. ^ a b c d e f Tank Museum accession record
  3. ^ Garth, Mike. "TANK HEAVY, TOG II* (E1951.49)". The Tank Museum. Retrieved 16 March 2020.
  4. ^ Hills (2017)
  5. ^ a b "The Tank Museum". The Tank Museum Online. 1 October 2017. Retrieved 16 April 2019.
  6. ^ a b c Coombs, Benjamin (2011). "2". British tank production, 1934-1945 (PDF) (PhD). Kent Academic Repository. p. 68. Retrieved 12 July 2023.
  7. ^ 5 HEAVY Tanks | Tank Chats, retrieved 11 November 2023
  8. ^ a b Chamberlain & Ellis (1969) p 79
  9. ^ a b Chamberlain & Ellis (1969) p 78

Bibliography

External links

This page is based on the copyrighted Wikipedia article: TOG2. Articles is available under the CC BY-SA 3.0 license; additional terms may apply.Privacy Policy