Sexton (artillery)

Source: Wikipedia, the free encyclopedia.

25pdr SP, tracked, Sexton
Continental R-975 9-cylinder Radial gasoline[1]
400 hp (298 kW)[1]
SuspensionVertical volute spring
Operational
range
125 miles+ (200 km)[1]
Maximum speed 25 mph (40 km/h)[1]

The 25pdr SP, tracked, Sexton

armour-piercing shell
. It found use in the Canadian, British, and other British Commonwealth armies, as well as other countries. After the war, a number of Sextons and Grizzlies were sold to Portugal, which used them into the 1980s.

History

In order to better provide artillery support in the highly mobile desert warfare of the

North African Campaign, the British Army had quickly adapted the Valentine tank into a self-propelled 25-pounder gun: the Bishop
. Introduced in 1942, the Bishop proved to have many problems in service. In particular, limited space meant that the turret had little elevation, requiring crews to use natural slopes, embankments or mounds to get the full range out of the gun.

As a stop-gap, the US-built M7 Priest, with a M101 105 mm howitzer, mounted on a M3 Lee chassis, was soon replacing the Bishop, reaching service in October 1942.[2] In March 1942, the UK ordered 2,500 for 1942 with another 3,000 for 1943. The first M7s were rushed to Egypt for the Second Battle of El Alamein where they played an important part.[3] However, because the US 105 mm gun was not otherwise used by the British military, supplying ammunition to Priest crews was complicated and caused delays.

Simultaneously, two new self-propelled 25-pounder projects were being pursued by the British General Staff. Firstly, in the US, the 25-pounder Howitzer Motor Carriage T51 – a Priest adapted to mount the 25-pounder – was tested from July 1942. Development was delayed by issues including the destruction of the gun mount on the prototype, during the first live-firing trials.[1][2]

Secondly, because US resources were increasingly devoted to equipping and upgrading the existing weaponry of US forces, the UK government inquired whether the Canadian government could facilitate rapid development and manufacturing of a self-propelled 25-pdr. The Canadian Department of Munitions and Supply asked the Canadian Army Engineering Design Branch to build such a vehicle.

A prototype was quickly built on the chassis of a Canadian Ram tank, which was also based on the M3 chassis. The Ram had been sidelined by a decision that Canadian armoured units should standardize around the Sherman and variants using the same chassis. The prototype was completed on 23 June 1942. Following trials in Canada, the Canadian government ordered 124 vehicles in three batches. The prototype was shipped to the United Kingdom in early 1943,[4] where it underwent further trials. In May 1943, it was formally accepted for use by the British Army and given the name "Sexton" (after the religious custodian and following in the tradition of the Bishop and the Deacon self-propelled guns).

Sexton self-propelled gun S287181 Beau Brummel.

A UK order for 300 Sextons was made in mid-1943, albeit built on the hull of the Grizzly tank (a Canadian-built variant of the M4A1 Sherman). The Ram-based SP gun became known as the Sexton Mark I, while the Grizzly-based variant was the Sexton Mark II. UK orders for the Sexton II eventually totalled 2,026 vehicles.

The Sexton was generally regarded as a successful project, unlike the Ram (which never saw combat in its original form).[5] Between 1943 and 1945, the Montreal Locomotive Works manufactured 2,150 Sextons for the use of both Canadian and British forces. The vehicle entered service in September 1943. In spite of its confused origins, the Sexton was a combination of proven parts and proved to be a successful design that remained in British service until 1956.

Operational service

The vehicles were first used in combat in Italy by the British Eighth Army.[1] Later, Sextons took part in the invasion of France and subsequent Battle of Normandy and the campaign in north-western Europe. During the D-day landings, a number of Sextons were ordered to fire from their landing craft as they approached the beaches although the fire did not prove to be very accurate.[1] After the war a number of units were equipped with the Sexton as part of the British Army of the Rhine (BAOR).

The following units were equipped with the Sexton at different periods:

British and Canadian forces used the Sexton for indirect supporting fire, keeping the Sextons back from the front line and used forward observers to direct overwhelming fire onto a target.

The Indian 1st and 2nd Field Artillery Regiments used Sextons after World War II.[6]

Variants

  • Sexton I: The first 125 vehicles manufactured. Based on the Ram tank hull.
  • Sexton II: It featured boxes added to the rear deck to carry batteries and an auxiliary generator to charge them. Based on the Grizzly (M4A1 Sherman) hull.
  • Sexton GPO (Gun Position Officer): The 25 pounder was removed and an extra No. 19 Wireless was added along with map tables; this vehicle was used to control battery fire.[7]

British self-propelled gun naming

A British self-propelled gun armed with the

Abbot
.

See also

25-pdr Sexton self-propelled artillery vehicle moving during demonstration at Fort Nelson, Hampshire
25-pdr Sexton self-propelled artillery vehicle firing during demonstration at Fort Nelson, Hampshire
  • Yeramba – an Australian self-propelled 25-pdr, introduced in 1950.

Notes

  1. ^ also known as "Mounting, SP, 25-pdr, C, Mk I"

References

  1. ^ .
  2. ^ a b Chamberlain & Ellis, p176
  3. ^ Chamberlain & Ellis, p139
  4. ^ AFV Profile "Ram and Sexton"
  5. ^ Stacey, C. P. (1970). Arms, Men and Government: The War Policies of Canada, 1939 - 1945 (PDF). The Queen's Printer by authority of the Minister of National Defence. pp. 513–514.
  6. .
  7. ^ AFV Profile

Sources

  • Chris Ellis, Peter Chamberlain - AFV No. 13 - Ram and Sexton, Profile Publications, England
  • Chamberlain, Peter; Ellis, Chris (1981) [1969], British and American Tanks of World War II (2nd US ed.), Arco Publishing

External links