Junggar Basin
The Junggar Basin (
Regional tectonic setting
The major structural components of the Junggar Basin divided into six parts:
- Wulungu Depression were formed by faulting and flat depression. There was about 2,000 – 4,000 m thick sedimentary layers that deposited from Permian to the present.[8]
- Luliang uplift (Sangequan uplift) was surrounded by narrow but steeply dipping at the north and wide but gently dipping at the south. There were about 1,100 – 4,000 m thick sedimentary layers and the complete layer from Permian to the present can be found in the southern part. Also, the plunging fold was found in this area.[8]
- Central Depression was formed by three major lowland plains where are in Manas, Central, and Wucaiwan. There were 5,000 m thick sedimentary layers from Carboniferous to Quaternary.[8]
- West Uplift consists of Chepaizi-Paotai uplift and Urho-Karamay monocline.
- Chepaizi-Paotai uplift formed by eastward plunging fold with faulting. The hanging wall consists of post-Carboniferous sedimentary layers.[3]
- Urho-Karamay monocline was formed with thrust fault along the west-northwest boundary of the basin.[8][9] The Indo-Australian plate collision during Neogene resulted in uplift of the northern Junggar basin. This also resulted in re-activation of Permian thrust faults,[9] produced faults on basement rocks and rifting on basin margin to form Karamay-Urho monocline. This area concentrated abundant hydrocarbons on the anticline part.[3]
- Chepaizi-Paotai uplift formed by eastward plunging fold with faulting. The
- East Uplift (Zhangpenggou-Qitai uplift) was formed by deformations in several times. The formation of NE-trend plunging fold in this area activated the faulting of basement rocks.[3]
- Tian Shan Foredeep formed during lower-middle Triassic since the Tian Shan has uplifted continuously.[3] During Cretaceous, the basin sank again and thus water depth became shallow due to tectonic deformations.[3] In Paleogene, the size of the lake kept reducing and the eastern basin become a landmass. Also, there was further subsidence of Tian Shan Foredeep because of the formation of Himalayan in Paleogene.[3]
Geology
Basement rock of Junggar Basin
In Precambrian section was made up of felsic-intermediate granite with the inclusion of greenstones and ophiolites,[10] where the Paleozoic section consists of mainly potassium- and sodium-deficient extrusive rocks.[11] The basalts in the basement which indicated trapped late Paleozoic oceanic crust that came from the mantle.[11]
Sedimentary stratigraphy
The sedimentary facies started to be dominant in Permian. The layers continuously deposited fluvial and lacustrine facies until the present day, mostly containing conglomerate, sandstone, siltstone, and mudstone.[2][3]
Major stratigraphic units in the Junggar basin from Carboniferous are shown in ascending order in the following table:[3][7][12][2][13]
Time | Period | Northwest | South | East |
Rock unit (Distinct geological features) | Rock unit (Distinct geological features) | Rock unit (Distinct geological features) | ||
Quaternary | Holocene | Terrestrial sediments with regional mud volcanoes and evaporite | ||
Pleistocene | glacial tills and eolian loess & gravels | |||
Tertiary | Neogene | Changjihe Group
(Dark-brown mudstone, siltstone & sandstone with thin conglomerate & limestone) |
Dushanzi Formation
(Thickly-bed shale interbedded with sandstone & calcite grains) | |
Suosuoquan Formation
(Mudstone, sandstone) |
Taxihe Formation
(Shale with ostracods, dolomitic sandstone) | |||
Shawan Formation
(Orange-red sandy mudstone) | ||||
Paleogene | Ulungurhe Formation
(quartzose sandstone & mudstone) |
Anjihaihe Formation
(Green shale with marls) | ||
Honglishan Formation
(medium-grained sandstone & mudstone) |
Ziniquanzi Formation
(Orange-red sandy shale) | |||
Cretaceous | Upper | Ailika Formation
(Mudstone at upper unit but conglomerate at lower unit) |
Donggou Formation
(Sandy shale, siltstone, sandstone & conglomerate, some calcite nodules) | |
Lower | Kalaza megasequence (99-154 Ma)
(Sandstone with marls, but mudstone and shale dominated in southern part. Conglomerate with cross-bedding structure at lowest unit. Presence of gypsum and fossil fish.) | |||
Jurassic | Upper | |||
Shishugou megasequence (154-169 Ma)
(Sandy mudstone to sandstone, with calcite materials and dinosaur fossils.) | ||||
Middle | ||||
Sangonghe megasequence (169-195 Ma)
(Presence of mudcracks in lower unit, coal red beds and dinosaur tracks at the top unit. Petrified woods were preserved.[14]) | ||||
Lower | ||||
Badaowan megasequence (195-206 Ma)
(Conglomerates in southern and eastern part. Massive mudstone beds and soft-sediment deformation in northwest. Widespread coals were present. Petrified woods and plant fossils were preserved.[14]) | ||||
Triassic | Upper | Haojiagou Formation
(Yellow silty shale with some coal) |
Xiaoquangou Group
(Yellow conglomerate, sandstone, mudstone & shale) | |
Huangshanjie Formation
(Greyish-green sandstone & mudstone) | ||||
Middle | Kelamayi Formation
(Conglomerate, sandstone with graded bedding) | |||
Lower | Baikouquan Formation
(Red conglomerate, sandstone & mudstone) |
Shangcangfanggou Group
(orange-red conglomerate with red mudstone) | ||
Permian | Upper | Urho Group
(siltstone, sandstone & conglomerate) |
Xiacanfanggou Group
(Greyish-green mudstone with sandstone, with some purple-red conglomerate and plant fossils) |
Pingdiquan Group
(orange-red alluvial sandstone & conglomerate, with shale) |
Shangjijicaozi Group
(Greyish-green feldspathic sandstone & mudstone, some fossiliferous limestone and black oil-shale) | ||||
Lower | Xiazijie Group
(orange-red clastic sedimentary rocks) |
Xiajijicaozi Group
(limestone with the presence of stromatolite) |
Chidi Group
(Grey mudstone, sandstone, conglomerate) | |
Carboniferous | Upper | Jiamuhe Group
(Organe-red conglomerate, and fossil plant-bearing sandstone & volcanic flows) |
Bashan Group
(pyroclastic turbidite, locally thinly-bedded limestone) |
Shiqiantan Group
(Conglomerate, sandstone, calcareous shale) |
Lower | Dishuiquan Group
(Grey tuff with regional limestone included brachiopod fossils, and pillow lava) | |||
Precambrian to Devonian | Basement rocks (various plutonic and volcanic rocks, ophiolites, turbidites tuffaceous and metasedimentary rocks) |
Paleoclimate and environment
Throughout Mesozoic, Junggar Basin was mainly in the fluvial and lake depositional environment.[3]
The climate in the late Permian showed the fluctuation between dry- or wet-dominated climate. The pieces of evidence included the presence of both organic beds and red beds. In the early Triassic, reddish sedimentary rocks formed that indicated the dominance of semi-arid climate.[1]
During Late Triassic-Early Jurassic, the Junggar basin was in a warm and wet climate due to the effect of continental
Tectonic evolution
Pre-Permian (before 290 Ma): basement rock evolution
Xinjiang paleocraton was pulled apart for a continental rifting episode to form extensional basins in Late Cambrian.[17] The continuous divergence of the continental crust during late Cambrian to Ordovician shaped the West Junggar Ocean.[17] The West Junggar Ocean presented as the present Tangbale and Honguleleng ophiolites from intra-plate volcanism, and then this volcanism shut in mid-upper Ordovician.[17][19] The Ordovician first ocean basin indicated that eastern Junggar was over passive margin.[17] Another rifting event established the Mayilashan ocean basin and back-arc basin in east Junggar during Silurian.[17] However, the compressional environment restricted the two landforms so that they ended up shut and folded in the late Silurian.[17] This eventually led to the convergence of Tarim, Kazakhstan and Siberian paleo-plates.[17] They were from the original Xinjiang paleocraton that puzzled each other again.[17]
Junggar Ocean and Kulumudi Ocean were produced from the third rifting event during lower-mid Devonian.[17][12][4] Eventually, the Junggar ocean and Kulumudi Ocean moved towards the north and undergone the subduction from upper Devonian to Late-Carboniferous.[4][17][12] At the same time, several volcanic arcs were developed during subduction.[17][12][4] Three plates (Tarim, Kazakhstan, and Siberian) converged together to form a trapped ocean that surrounded volcanic arc and orogens in Mid-Carboniferous.[12][20] Alkali-rich granites with gold deposits intruded the converged plates.[4] This revealed the partial melting of the oceanic crust.[4] This also marked as the last subduction event following the post-collisional stage in Late-Carboniferous.[12][4] Besides, Such intrusive rocks demonstrated that this was the last melting episode of oceanic crust.[20] As part of the Eurasian plate started to combine continental crusts for the three plates, to consolidate them as another modern stable continental block.[20]
Underplating events
The mafic-ultramafic igneous rocks formed due to underplating with crustal stretching during Carboniferous to Permian.[4][21] The magma underplating during Carboniferous to Permian (330-250 Ma) period heated up the lower crust and thus the crust got hotter. The following cooling crustal episode led to part of the mountain belt sink by thermal subsidence, which ended up forming the Junggar Basin.[21] Another magma underplating event occurred in the Mesozoic era.[22][11] This was forming heterogenic silica-rich igneous rocks due to the partial melting of numerous oceanic crusts contaminated with mantle wedge.[11][22]
Permian to Present (From 290 Ma): Junggar Basin evolution
With the influence of
Geological resources
Petroleum system
Junggar Basin contains the third-largest
Besides, Tian Shan Foredeep in the southern Junggar Basin (including
Coal
Bituminous coal was found in Tian Shan Foredeep.[3] It was deposited in the lake or swamp environment in the Early to Middle Jurassic periods.[3] For example, Badaowan, Sangonghe, and Xishanyao Formation.[3] About 18 gigatonnes of coal can be recovered in Tian Shan Foredeep.[3] Apart from Tian Shan Foredeep, the coal can be found in the base of alluvial fan and nearby the margin of lakes in the eastern and western margin of Junggar Basin.[3]
Ore deposits
Ore deposits in the Junggar Basin were mainly formed in the Paleozoic era which was related to tectonic development.[5] The followings are the available ore deposits in Junggar Basin:[5]
- Porphyry copper-gold deposits found in the west and northeast of the Junggar Basin.
- Iron deposits found in the eastern part of the basin due to early subduction events during Lower Carboniferous.
- During post-collision extensional events in Permian, gold deposits found on the west side and tin deposits found on the east side.
See also
References
- ^ S2CID 128870218.
- ^ ISSN 0008-4077.
- ^ ISSN 2331-1258.
- ^ S2CID 140136934.
- ^ ISBN 9783540279457
- ^ "Land farthest from sea". Guinness World Records. Retrieved 2023-02-27.
- ^ ISSN 0887-0624.
- ^ a b c d Wang Shangwen, Zhang Wanxuan, Zhang Houfu, and Tan Shidian (1983). Petroleum Geology of China. Beijing, China: Petroleum Industry Press. p. 303.
{{cite book}}
: CS1 maint: multiple names: authors list (link) - ^ S2CID 128833104.
- ^ Zhao, Jun-Meng, Ying Huang, Zong-Jin Ma, Xue-Zhong Shao, Hong-Gang Cheng, Wei Wang, and Qiang Xu. (2008). "Discussion on the basement structure and property of northern Junggar basin". Chinese Journal of Geophysics. 51 (6): 1767–1775.
{{cite journal}}
: CS1 maint: multiple names: authors list (link) - ^ ISSN 1367-9120.
- ^ ISSN 0040-1951.
- ISSN 1875-5100.
- ^ doi:10.3724/SP.J.1261.2014.00049 (inactive 31 January 2024).)
{{cite journal}}
: CS1 maint: DOI inactive as of January 2024 (link) CS1 maint: multiple names: authors list (link - ^ ISSN 0016-7606.
- S2CID 135419053.
- ^ ISSN 0040-1951.
- S2CID 134767140.
- S2CID 129929692.
- ^ OCLC 24839100.
- ^ S2CID 128697799.
- ^ S2CID 134987717.
- ^ ISSN 0016-7606.
- ^ Minfang, W., Yangquan, J., Jianye, R., Dianjun, T., & Zhicheng, X. (2007). "Characteristics of Jurassic subsidence and its relation with tectonic evolution in Junggar Basin". Acta Petrolei Sinica. 28 (1): 27.
{{cite journal}}
: CS1 maint: multiple names: authors list (link) - ^ ISSN 2352-8540.
- ^ ISSN 0743-9547.
- ^ ISSN 1876-3804.
- ^ ISSN 0149-1423.)
{{cite journal}}
: CS1 maint: numeric names: authors list (link