Pride of Baltimore

Coordinates: 23°00′N 67°00′W / 23.000°N 67.000°W / 23.000; -67.000
Source: Wikipedia, the free encyclopedia.

Pride of Baltimore in October 1981

The Pride of Baltimore was a reproduction of a typical early 19th-century "

transatlantic slave trade from Africa.[1]

Pride of Baltimore was commissioned on 1 May 1977 by the 44th Mayor of Baltimore, William Donald Schaefer, in an elaborate public ceremony in the historic Inner Harbor watched by thousands of Baltimoreans and Marylanders. She spent nine years at sea logging over 150,000 miles, equivalent to traveling six times around the globe. On 14 May 1986, the first Pride of Baltimore was lost at sea in the Caribbean, and her captain and three of the crew died.

The Pride of Baltimore II was commissioned as the successor and memorial to the Pride in 1988, sailing in the same Goodwill Ambassador role for the city of Baltimore, but its role has now expanded to also representing the State of Maryland and the "Land of Pleasant Living" in the Chesapeake Bay region. Pride II has sailed nearly 200,000 miles and visited over 200 ports in 40 countries in its now near three decades of voyages.

Chasseur: The inspiration for the Pride of Baltimore

Main article: Chasseur (1812 clipper)

The Pride of Baltimore was built as an authentic reproduction of an early nineteenth-century "Baltimore clipper"

topsail schooner.[2] It was not patterned after any particular vessel, but was rather designed as a typical "Baltimore Clipper" of the type in its heyday. It was indirectly named for the Baltimore-built topsail schooner Chasseur sailed by the privateer captain Thomas Boyle; Chasseur was known as the "Pride of Baltimore" and participated in the War of 1812 (1812–1815).[3]

One of the most famous of the American

Ghent, United Netherlands had been signed ending the War of 1812. Perhaps its most famous accomplishment was the capture of the schooner HMS St Lawrence.[3][4]

On the Chasseur's return to Baltimore, the national newspaper published in the city,

Niles Weekly Register dubbed the vessel, her captain, and crew the "pride of Baltimore" for their achievement.[5]

After the end of the War of 1812, Chasseur was engaged in the China trade. Baltimore clippers were one of the types of clippers used to smuggle opium into China —- a trade which was both illegal and highly lucrative.[6][7] Other Baltimore Clippers, made redundant by the end of the war and of limited cargo carrying capacity, became engaged in the slave trade from Africa.[8]

Pride of Baltimore

History
United States
NamePride of Baltimore
OwnerCity of Baltimore
BuilderMelbourne Smith/International Historical Watercraft Society
Laid downApril 1976
Launched27 February 1977
Commissioned1 May 1977
HomeportBaltimore, Maryland
FateSunk, 14 May 1986
General characteristics
TypeTopsail schooner
Displacement129 long tons (131 t)
Length
  • 90 ft (27 m) on deck
  • 79 ft (24 m)
    w/l
Beam23 ft (7.0 m)
Draft9 ft 9 in (2.97 m)
Sail plan9,327 sq ft (866.5 m2) sail area
Crew12

Baltimore revival

The old municipal piers 1 through 6 along East Pratt Street around the north shore of the former "Basin" of the Northwest Branch of the Patapsco River, now rechristened "Inner Harbor" had been cleared in 1971 of their warehouses and buildings and rebuilt and by 1974, a new Pier 1, renamed "Constellation Dock" was constructed providing a new centerpiece home for the ancient warship sloop-of-war USS Constellation of 1854 to be moored and anchored for future visitors. A brick sidewalk promenade was built around the water's edge on the new extended bulkheads on the west shores along rerouted and rebuilt Light and South Calvert Streets, and the south shore below landmark Federal Hill Park, and running down the sides of the Pratt Street Piers 1–6.[citation needed]

Construction and service

In 1975, the City of

Baltimore adopted a proposal from Charles Center-Inner Harbor Management for the construction of a replica sailing vessel as a centerpiece of the redevelopment of its Inner Harbor. The city requested proposals for "an authentic example of an historic Baltimore Clipper" to be designed and built using "construction materials, methods, tools, and procedures... typical of the period."[2][9]

A topsail schooner design by

launching ceremonies on 27 February 1977, only 10 months after the start of construction. Mayor William Donald Schaefer commissioned the Pride of Baltimore on behalf of the citizens of the city of Baltimore and the state of Maryland, two months later on 1 May 1977.[9]

The Pride sailed over 150,000 nautical miles (280,000 km) during its nine years of service, visiting ports along the Eastern Seaboard from Newfoundland to the Florida Keys, the Great Lakes of North America, the Caribbean Sea and the West Coast along the Pacific Ocean from Mexico to British Columbia in Canada. Itvisited European ports across the Atlantic Ocean in the North Sea, the Baltic Sea and the Mediterranean Sea.[9]

Sinking

On 14 May 1986, a

microburst squall, possibly a white squall, struck the Pride while it was returning from the Caribbean, 250 nautical miles (463 km) north of Puerto Rico. Winds of 80 knots (150 km/h; 92 mph) hit the vessel, capsizing and sinking it. Its captain and three crew died; the remaining eight crewmembers floated in a partially inflated life-raft for four days and seven hours with little food or water until the Norwegian tanker Toro came upon them and rescued them.[2][5][10]

A memorial on Rash Field in Baltimore's Inner Harbor memorializes the Pride's captain, Armin Elsaesser 42, and crewmembers Vincent Lazarro, 27, engineer; Barry Duckworth, 29, carpenter; and Nina Schack, 23, seaman.[2]

Pride of Baltimore II

Pride of Baltimore II
Pride of Baltimore II photographed in September 2008
History
United States
NamePride of Baltimore II
OwnerPride of Baltimore, Inc.
OperatorPride of Baltimore, Inc.
Port of registryU.S.A.
BuilderG. Peter Boudreau
Launched30 April 1988
Commissioned23 October 1988
Maiden voyage23 October 1988
HomeportBaltimore, Maryland
IdentificationMMSI number: 303615000
Nickname(s)"America's Star-Spangled Ambassador"
General characteristics
TypeTopsail schooner
Length
  • 100 ft (30 m) on deck
  • 157 ft (48 m) sparred length
Beam26 ft 4 in (8.03 m)
Height107 ft (33 m)
Draft12 ft 6 in (3.81 m)
Propulsiontwo 160 horsepower diesel
Sail plan9,018 sq ft (837.8 m2) sail area
SpeedUp to 13 knots
Crew12

Origins

Construction and service

Like the original Pride, the Pride II is not a replica of a specific vessel, and, although it represents a type of vessel known as a "Baltimore Clipper", it was built to contemporary standards for seaworthiness and comfort. Like its predecessor, it is a topsail schooner. Built in the iconic "Baltimore Clipper" style, Pride II has heavily raked masts, and has 10 sails, she carries two large

headsails, and a square topsail and flying topgallant on the foremast. Also rare on modern traditional sailing vessels, it flies studding sails (stun's'ls), additional sails set along the edge of the square topsail and the gaff mainsail on temporary spars known as stun's'l booms.[9] Pride II also carries a very unusual sail known as a ring-tail
, set like a studding sail off the main boom and main gaff.

Over two decades later in its storied career, on 5 September 2005, the Pride of Baltimore II suffered a complete dismasting while sailing in a squall in the Bay of Biscay off the western coast of France. The ship returned to port under motor power for repairs and spent over four months rebuilding the rig in St. Nazaire, France.[11]

Until 2010, the Pride of Baltimore II was owned by the citizens of the state of Maryland and operated by Pride of Baltimore, Inc., a private, nonprofit organization. Ownership was transferred to the ship's nonprofit operator with unanimous approval by Maryland's state governmental Board of Public Works on 9 June 2010.[12]

See also

References

[13][14][15]

  1. ^ Chapelle, Howard I. (1930). The Baltimore Clipper: Its Origins and Development. New York: Bonanza Books. p. 3.
  2. ^ a b c d Pitts, Jonathan (8 May 2012). "City plans fixes for Pride of Baltimore memorial in disrepair". The Baltimore Sun. The story began in 1975 when the city—gearing up to revitalize its Inner Harbor—adopted a proposal from Charles Center-Inner Harbor Management for the construction of an exact replica of a historic 19th-Century Baltimore Clipper.
  3. ^ a b Vallar, Cindy (2008). "Fells Point and the Baltimore Privateers". Pirates and Privateers. Retrieved 7 January 2014.
  4. ^ Garitee, Jerome R. (1977). The Republic's Private Navy: The American Privateering Business as Practiced by Baltimore During the War of 1812. Mystic Seaport.[page needed]
  5. ^
    ISBN 0-8065-2492-8.[page needed
    ]
  6. ^ Chapelle (1930), p. 145.
  7. ISBN 0-415-21500-5
    .
  8. ^ Chapelle (1930), pp. 107–141.
  9. ^
    ISBN 0-87742-309-1.[page needed
    ]
  10. ^ Jeffrey, Scott (14 July 1986). "When the Pride of Baltimore Sank, Eight Sailors Got a Crash Course in Ocean Survival". People.
  11. ^ "Massive Rig Failure". Bosun's Mate. 13 November 2005. Retrieved 24 October 2012.
  12. ^ "Action Item 13-GM" (PDF). After Meeting Agenda Summary. Maryland Board of Public Works. 9 June 2010. p. 21. Retrieved 7 January 2014.
  13. ^ "Building Pride of Baltimore II". Pride of Baltimore, Inc. 2016. Archived from the original on 12 October 2017.
  14. ^ "Original Pride of Baltimore". 19 December 2013. Retrieved 27 September 2016.
  15. ^ "History of Pride: Pride of Baltimore".

Other sources

External links

Wikimedia Commons has media related to Pride of Baltimore (ship, 1977) and Pride of Baltimore II (ship, 1988).

23°00′N 67°00′W / 23.000°N 67.000°W / 23.000; -67.000

Retrieved from "https://en.wikipedia.org/w/index.php?title=Pride_of_Baltimore&oldid=1215790208"