Xserve RAID
This article needs additional citations for verification. (January 2007) |
Xserve RAID is a attachment mass-storage server that was offered by Apple Inc.
Xserve RAID held up to 14 hot-swappable
Although the Xserve RAID contained 14 drives, they were split into two independent groups of 7 drives each managed by an identical RAID controller. Importantly, the controllers were independent, but not redundant; each managed seven of the storage array's fourteen drives, given a failure of one of the controllers those 7 drives were not accessible: the other could not take over its duties. Xserve RAID did, however, have redundant cooling units and power supplies. Xserve RAID's ports were two
Apple marketed Xserve RAID mainly as a companion to
Xserve RAID was available in models costing between US$5,999 and US$10,999[2][3] (later US$12,999),[4][5] plus configuration and support options.
The Xserve RAID was discontinued on February 19, 2008.[6]
History
- Xserve RAID [2]
- Build: Feb 2003 - Jan 2004
- Part numbers: M8668, M8669, M8670
- Dual independent RAID controllers each with:
- One HSSDC2 Fibre Channel Port
- One DB-9 serial port for UPS systems
- One 10/100BASE-T Ethernet interfaces for remote management
- 14 independent ATA100 Apple drive module channels/bays
- 180 GB PATA supported
- Xserve RAID (SFP) [3]
- Build: Jan 2004 - Oct 2004
- Part numbers: M9721, MA208
- Dual independent RAID controllers each with:
- One 2 Gb Fibre Channel SFP port with 200 MB/s throughput
- One DB-9 serial port for UPS systems
- One 10/100BASE-T Ethernet interfaces for remote management
- 14 independent ATA100 Apple drive module channels/bays
- 180 GB, 250 GB PATA support added on firmware 1.2.6
- Xserve RAID (SFP Late 2004) [4]
- Build: Oct 2004 - Feb 2008
- Part numbers: A1009
- Dual independent RAID controllers each with:
- One 2 Gb Fibre Channel SFP port with 200 MB/s throughput
- One DB-9 serial port for UPS systems
- One 10/100BASE-T Ethernet interfaces for remote management
- 14 independent 100 MB/s ATA100 Apple drive module channels/bays
- 180 GB, 250 GB, 400 GB and 500 GB support added on firmware 1.5, 750 GB and 1 TB PATA support added on firmware 1.5.1
- Line discontinued: February 19, 2008[6]
References
- ^ a b "Xserve RAID User's Guide" (PDF). Apple Computer Inc. 2003. Archived (PDF) from the original on February 6, 2009. Retrieved November 24, 2022.
- ^ Apple, Inc.February 10, 2003. Retrieved November 24, 2022.
- ^ a b "Apple Unveils New Xserve RAID Storage System" (Press release). Apple Inc. January 6, 2004. Retrieved November 25, 2022.
- ^ a b "Apple Updates Xserve RAID Storage System" (Press release). Apple Inc. October 19, 2004. Retrieved November 25, 2022.
- Apple, Inc.September 13, 2005. Retrieved November 24, 2022.
- ^ a b Dalrymple, Jim (February 19, 2008). "Apple discontinues Xserve RAID". Macworld. Foundry. Retrieved November 25, 2022.
External links
- Xserve RAID - official support page