BR Standard Class 6
BR Standard Class 6 Route Availability 8 | |
---|---|
Locale | Scottish Region, London Midland Region |
Withdrawn | December 1962 – June 1966 |
Disposition | All original locomotives scrapped, 72010 Hengist under construction. |
The BR Standard Class 6, otherwise known as the Clan Class, was a class of
The Clan Class was based upon the BR Standard Class 7 Britannia Class design, incorporating a smaller boiler and various weight-saving measures to increase the route availability of a Pacific-type locomotive for its intended area of operations, the west of Scotland. The Clan Class received a mixed reception from crews, with those regularly operating the locomotives giving favourable reports as regards performance.[2] However, trials in other areas of the British Railways network returned negative feedback, a common complaint being that difficulty in steaming the locomotive made it hard to adhere to timetables. Reports exist that suggest a degree of the disappointment with these locomotives was attributable to their being allocated to Class 7 work where they were only a Class 6 in reality; a problem put down to their very similar appearance to the BR Standard Class 7.
Some of the Clan Class locomotives took their names from the Highland Railway Clan Class which was being withdrawn from service at the time, indicating further their intended area of operations.[3] The class was ultimately deemed a failure by British Railways, and the last was withdrawn in 1966. None survived into preservation, although a project to build the next locomotive in line, number 72010 Hengist, is progressing. Assembly of the frames has commenced at CTL Seal, Sheffield.
Background
Under the initial scheme for the creation of a series of British Railways standard locomotives, larger passenger and mixed traffic types were intended to be of the 4-6-2 Pacific wheel arrangement, the main advantage of which was that it could be fitted with a wide firebox capable of burning a range of coal types (and qualities).[4] The Pacifics were originally intended to be produced in four power groups: 8, 7, 6, and 5, according to the system of power ratings inherited from the LMS constituent company. Power groups 7, 6 & 5 were to be for mixed traffic (MT) service. The whole standardisation programme was launched with the building of the 7MT Britannia design in 1951; in the event, the 5MT proposal was dropped in favour of an updated version of the highly successful Stanier mixed traffic 4-6-0.[5]
It was further appreciated that a Pacific of 6MT power could be built with a high enough route availability to fulfil all remaining requirements; this had been amply demonstrated by
The advantages of such a locomotive for use on some of the heavily restricted main lines in Scotland, such as the Dumfries to Stranraer line, had been further demonstrated by the remarkable performance of Light Pacific number 34004 Yeovil on the ex Highland Railway line to Inverness during the British Railways 1948 Locomotive Exchange Trials. During these trials the locomotive showed that a Light Pacific had the potential to revolutionise the timetable over this difficult trunk route. As the general policy of the Railway Executive was to eliminate as far as possible the perceived complication of multi-cylinder locomotives, an equivalent 2-cylinder Pacific was produced by mounting a smaller and lighter boiler on the standard 7MT chassis.[7]
Design details
The arrangement consisted of a modified Standard Class 7 boiler, with smaller steel cylinders and other modifications to save weight and hence increase route availability.
Following experience of occasional cracks appearing in the frame plates near the spring brackets, had the second batch of Class 6 Standard Pacifics been built, the chassis would have been rearranged to be similar to that used on the solitary Class 8 Pacific. This would have resulted in the locomotive riding on three cast steel Combined Frame Stretcher & Spring Brackets carrying the 10 front-most spring brackets and lengthened spring brackets behind the rear driven axle. These Combined Frame Stretcher & Spring Brackets are often referred to as "sub-frames". (Perhaps remarkably, the rearmost spring brackets were not to be integrated into a single cast combined sub-frame/pony truck pivot stretcher. The pony truck pivot stretcher being a separate fabrication).[10]
Unlike the smaller BR Standards the exhaust steam manifold within the smokebox saddle (along with the BR Standard Class 7 engines) was a steel casting[11] that was welded into the saddle. Other original drawings[12] confirm the exhaust steam manifold was a steel fabrication in the smaller BR standards.
Construction history
Designed at the drawing offices of
Initial modifications
After initial running-in, E.S.Cox was quoted as discerning a distinct "woolliness" in their steaming, and although they missed their appointment at the Rugby Locomotive Testing Station due to late completion, some modifications were carried out, most notably to the diameter of the blastpipe, resulting in better steaming and increased power.[13] Initially, the return cranks on the main driving wheels were of LNER block-type as seen on Arthur Peppercorn's A1s and A2s, but this was changed to the simpler LMS four-stud fitting. With time, enough information was gathered from operational feedback from crews to allow modifications to be applied to the further 15 locomotives on order in the second batch, had they been built.[13]
Naming the locomotives
The choice of locomotive names came from engineer and future railway historian Ernest Stewart Cox's desire to replicate the extinct Ex-
Operational details
The Clan Class had a mixed reception when first introduced to British Railways locomotive crews because there were only 10 locomotives in a class that was mostly confined to the North West of the railway network. This was due to the fact the low number of class members prevented effective training of locomotive crews throughout the nationalised network, and a degree of partisanship amongst crews towards newer locomotives further ensured this.
The poor steaming characteristics of the class had been the result of rushed production, which was another factor that led to the bad reputation of the Clan Class.
The engines also performed on Glasgow–Crewe, Manchester and Liverpool services, Edinburgh–Leeds services, Carlisle–Bradford services, and finally the Stranraer Boat Train workings.[19] As more crews got used to them, the class could be found far from home territory at destinations as diverse as Aberdeen, Inverness, Port Talbot, Newcastle upon Tyne, Bristol, and even London.[19] Clan number 72001 to this day remains the only Pacific locomotive to have worked over the West Highland Line, the result of a successful trial held in early 1956 to ascertain whether a Pacific type could traverse this steeply graded line.[20] Having passed that test, a tribute to the versatility of the class, Clan Cameron was allowed to work special trains for the Clan Cameron gathering that took place in June of that year.[21]
In August 1958, number 72009 was tested on the
Most Scottish and Midland region crews that used them regularly took to the class, and found that if used properly, running times were kept with ease.[23] These crews rated them the most sure-footed of any Pacifics available on the Midland Region, though other crews who tested them claimed that the Clans were prone to slipping, though this was the case with most Pacific designs.[24] Despite the various successes of the Clans, the class was generally regarded as a failure, even with overall performance being just short of Riddles' aims.[25] However, the premise of all British Railways Standard designs was for a hard working, easily maintained, economical, highly available, and all-purpose locomotive. In these respects, the Clans were highly successful.[26]
Proposed second batch and withdrawal
Prior to the publishing of the
The first locomotives to be withdrawn from service were the Polmadie locos 72000-72004 en masse in December 1962, where after being moved first to Glasgow Parkhead and stored, they were eventually moved to Darlington for scrapping in 1964.[28] Of the Kingmoor allocation, the first, number 72005, was withdrawn in April 1965, whilst the final loco was 72008 on 21 May 1966 from Carlisle Kingmoor shed.[28] When No 72008 Clan MacLeod was finally scrapped in August 1966, it rendered the class extinct. Though this locomotive served British Railways for only fourteen years and three months, it was the longest serving Clan.[28]
Year | Quantity in service at start of year |
Quantity withdrawn |
Locomotive numbers | Notes |
---|---|---|---|---|
1962 | 10 | 5 | 72000–04 | |
1965 | 5 | 3 | 72005/07/09 | |
1966 | 2 | 2 | 72006/08 |
Livery and numbering
The livery of the Clans was a continuation of the standard British Railways green applied to express passenger locomotives after
Preservation
None of the original engines survived into preservation, however progress is being made by a Registered Charity (No. 1062320), the Standard Steam Locomotive Company, on constructing the engine that would have been the first of the uncompleted batch of 15, number 72010 Hengist. As 999 BR standard steam locomotives were built in the years up to 1960 the builders consider this is the 1000th locomotive build to be commenced to a British Railways standard design.[32] The Standard Steam Locomotive Company believes that significant costs will be avoided as many of the required cast parts can be made from patterns held by fellow members of the British Railways Standard Locomotive Owners Group (BRSLOG).
See also
Footnotes
- ^ Clarke, David: Riddles Class 6/7 Standard Pacifics, pp.80–87
- ^ a b c Atkins 1992, p. 10.
- ^ a b Cox, E. S.: British Railways Standard Locomotives, p. 62
- ^ Clarke 2006, p. 85.
- ^ Haresnape, Brian: Loco profile no. 12: BR Britannias, p. 270
- ^ Bulleid, H. A. V.: Bulleid of the Southern, p. 68
- ^ Haresnape, Brian: Loco profile no. 12: BR Britannias, p. 271
- ^ a b Cox, E. S.: British Railways Standard Locomotives, p. 61
- ^ a b c d Clarke, David: Riddles Class 6/7 Standard Pacifics, p. 80
- ^ Confirmed on various original BR drawings including SL/DE/21642, SL/DE/21631 and SL/DE/22042 sourced from the NRM
- ^ Confirmed on original BR drawing SL/DE/19620 sourced from the NRM
- ^ Including BR drawing SL/SW/616 sourced from the NRM
- ^ a b Cox, E. S.: British Railways Standard Locomotives, p. 64
- ^ Gilbert & Chancellor 1994, pp. 151, 153
- ^ Atkins 1992, pp. 6–7.
- ^ a b Farr, Keith: ' 'Clans' Highland and Lowland', pp. 722–723
- ^ Farr, Keith: ' 'Clans' Highland and Lowland', p. 718
- ^ Atkins 1992, p. 9–10.
- ^ a b Barnes, Robin: 'Salute to the Scottish standard - Part 2', pp. 286–287
- ^ Farr, Keith: ' 'Clans' Highland and Lowland', pp. 714–723
- ^ Farr, Keith: ' 'Clans' Highland and Lowland', pp. 719–720
- ^ a b c 'Experimental use of the Clan Class on the Liverpool Street-Clacton service', p. 218
- ^ a b Barnes, Robin: 'Salute to the Scottish Standard - Part 1', pp. 235–241
- ^ Barnes, Robin: 'Salute to the Scottish Standard - Part 2', pp. 288–290
- ^ Barnes, Robin: 'Salute to the Scottish Standard - Part 1', pp.236–237
- ^ Barnes, Robin: 'Salute to the Scottish Standard - Part 2', p. 290
- ^ a b '"CLANS" for the Southern' (Trains Illustrated), p. 406
- ^ a b c Clarke, David: Riddles Class 6/7 Standard Pacifics, p.84
- ^ Clarke, David: Riddles Class 6/7 Standard Pacifics, pp. 82–83
- ^ Clarke, David: Riddles Class 6/7 Standard Pacifics, p. 82
- ^ Clarke, David: Riddles Class 6/7 Standard Pacifics, p. 84
- ^ Thomas 2006, p. 20
References
- "A New Light Pacific". Trains Illustrated: 5. 1952.
- Atkins, Philip (1992). "The enigma of the BR 'Clans'". Steam World: 65.
- Barnes, Robin (1996). "Salute to the Scottish Standard – Part 1". Backtrack. 10 (5).
- Barnes, Robin (1996). "Salute to the Scottish Standard – Part 2". Backtrack. 10 (6).
- Bradley, Rodger P. (1984). The Standard Steam Locomotives of British Railways. David & Charles. ISBN 0715383841.
- ""CLANS" for the Southern". Trains Illustrated: 7. 1954.
- Clarke, David (2006). Riddles Class 6/7 Standard Pacifics (Locomotives in Detail volume 5). Hinckley: Ian Allan. ISBN 0-7110-3177-0.
- Cox, E. S. (1966). British Railways Standard Locomotives. London: Ian Allan.
- "Experimental use of the Clan class on the Liverpool Street-Clacton service". Locomotive, Railway Carriage & Wagon Review: 64. 1958.
- Farr, Keith (2001). "'Clans' Highland and Lowland". Backtrack: 15.
- Gilbert, P.T.; Chancellor, P.J. (1994). Taylor, R.K. (ed.). A Detailed History of British Railways Standard Steam Locomotives – Volume One: Background to Standardisation and the Pacific Classes. Lincoln: ISBN 0-901115-81-9.
- Haresnape, Brian. Loco profile no. 12: BR Britannias. Windsor: Profile Publications.
- Rogers, Colonel H. C. B. (25 December 1980). Transition from Steam. London: Ian Allan. ISBN 0-7110-1014-5.
- Thomas, Cliff (December 2006). Pigott, Nick (ed.). "The 'Lazarus' locomotives - number 1: BR 'Clan' Pacific no. 72010 HENGIST". The Railway Magazine. 152 (1268). London: IPC Media.
External links
- 72010 Hengist Official Website
- Class CLAN Details at Rail UK
- http://www.tower-models.com/towermodels/ogauge/djh/k308/
- 1000th BR Standard steam locomotive to be built at Swanage