Liaodactylus
Liaodactylus | |
---|---|
Holotype skull of Liaodactylus | |
Scientific classification | |
Domain: | Eukaryota |
Kingdom: | Animalia |
Phylum: | Chordata |
Order: | †Pterosauria |
Suborder: | †Pterodactyloidea |
Family: | †Ctenochasmatidae |
Genus: | †Liaodactylus Zhou et al., 2017 |
Type species | |
†Liaodactylus primus Zhou et al., 2017
|
Liaodactylus is a genus of filter-feeding ctenochasmatid pterosaur from the Jurassic of China. The genus contains one species, L. primus, described by Zhou et al. in 2017. As an adaptation to filter-feeding, Liaodactylus had approximately 150 long, comb-like teeth packed closely together. It is both the earliest known ctenochasmatid and the first filter-feeding pterosaur from the Jurassic Tiaojishan Formation. Later and more specialized ctenochasmatids differ from Liaodactylus in having longer snouts, smaller openings (or fenestrae) in the skull, and more teeth. Within the Ctenochasmatidae, Liaodactylus was most closely related to the European Ctenochasma.
Discovery and naming
There is one specimen of Liaodactylus known, namely the
Liaodactylus was described in 2017 by Zhou et al. The genus name combines Liao, a shortened prefix form of "Liaoning", with Greek dactylos ("finger"), a standard pterosaurian suffix. Meanwhile, the specific name primus, from Latin, refers to the early age of Liaodactylus relative to other
Description
Snout, jaw and teeth
The head of Liaodactylus is slender and long, with a skull length of 13.3 centimetres (5.2 in) and a jaw length of 11.7 centimetres (4.6 in).[1] Out of this, the snout is 49.1% of total skull length, and the nasoantorbital fenestra (the fusion of the nostril and the antorbital fenestra, seen in all members of the Monofenestrata[4][5]) is 31% of skull length. In more derived ctenochasmatids, the nasoantorbital fenestra is much smaller relative to the skull, being only 10-12% of skull length in Pterodaustro; the snout is also longer, being over 85% of skull length in Pterodaustro.[6] Also shorter than other ctenochasmatids is the dentary symphysis, the fused portion of the lower jaw, which is only 30.5% of jaw length. Morphologically, the sides of the snout are parallel (unlike the spoon-tipped snouts of Gnathosaurus), most of the mandible is composed mainly of the dentary, and the well-developed retroarticular process is formed by the angular bone like in other ctenochasmatids.[1]
There are many long, needle-like, outward-projecting, tightly packed, equally-spaced teeth in the jaws of Liaodactylus, totalling to 152 teeth across both jaws. This is more than Gnathosaurus (128–136), about the same as Gegepterus (150),[7] but much less than Ctenochasma (200-552)[8] and Pterodaustro (almost a thousand).[6] The teeth become shorter towards the back of the jaws, eventually becoming short, peg-like structures at the back of the tooth row; the back of the tooth row corresponding to the front 1/3 of the nasoantorbital fenestra, which is unusual among ctenochasmatids (where the teeth usually stop entirely before the fenestra). The first tooth at the front of each jaw is also somewhat shortened, being only half the length of the second. Collectively, the teeth, which would have interlocked when the jaw was closed, form a comb-like complex that would have been used for filter-feeding.[1][9]
Side of the skull and palate
Among ctenochasmatids, the jugal bone of Liaodactylus is quite narrow, especially below the large eye socket. It splits into three branches: the very long and tapering anterior process, which forms the back two-thirds of the bottom border of the nasoantorbital fenestra; the vertical orbital process; and the angled temporal process, which is very long compared to the orbital process. The bone is bent slightly such that the margin of the jaw below the eye socket is curved. At the back, the temporal process of the jugal has fused rather extensively with the neighboring quadratojugal bone. Further back on the skull, the quadrate bone articulates with the squamosal bone above and the lower jaw below; the long shaft at the rear of the quadrate is very strongly angled, forming an angle of 160° with the jaw margin, like other ctenochasmatids. The jaw joint is directly underneath the eye socket.[1]
At the back of the maxilla, the palate form a wide shelf which is deeply notched at the back, forming in part the suborbital fenestra. Small spikes along the midline of the suborbital fenestra represent the palatine bones, which contact the maxilla. The ectopterygoid bones are three-pronged; the lateral processes close off the back of the suborbital fenestra, the anterior processes join the process of the palatal shelf, and the posterior process overlaps the pterygoid bone and forms part of the pterygo-ectopterygoid fenestra, which is separated from the suborbital fenestra by a bar of the pterygoid; the same bar is seen in Gnathosaurus, albeit much shorter.[10][11] As for the pterygoid itself, it was expanded along the midline and projected backwards to connect to the basisphenoid bone and quadrate.[1]
Braincase and vertebrae
The top of the
As for the
Classification
Zhou et al. assigned Liaodactylus to the Ctenochasmatidae in 2017 based on a phylogenetic analysis. It shares with other ctenochasmatids the relative proportions of its skull height at the squamosal bone, its skull height at the jaw joint, and the length of the snout at the level of the nasoantorbital fenestra; additionally, in terms of morphological characters, it shares a retroarticular process that is pointed backwards and downwards. Within the Ctenochasmatidae, Liaodactylus was found to be closest to Ctenochasma, with which it shares the ratio of jaw-to-skull length and the teeth being angled out to the sides. The phylogenetic tree recovered by the analysis is reproduced below.[1][4]
Pterodactyloidea |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||
Paleoecology
Liaodactylus is known from the
Non-archosaurs are also present in the Yanliao Biota. Mammaliaforms include Liaotherium gracile, Manchurodon simplicidens, Pseudotribos robustus, Volaticotherium antiquum, Castorocauda lutrasimilis, Docofossor brachydactylus, Arboroharamiya jenkinsi, Megaconus mammaliaformis, Xianshou linglong and X. songae, Shenshou lui, and Juramaia sinensis.[15][16] Additionally, there are lizards, including "Yabeinosaurus" youngi;[17] an undescribed crocodylomorph; salamanders, including Chunerpeton tianyiensis, Jeholotriton paradoxus, Liaoxitriton daohugouensis, and Pangerpeton sinensis;[18] and fish, including Liaosteus hongi and a member of the Ptycholepidae.[13][19]
In terms of environment, the Tiaojishan Formation represents a forested woodland with conifers, cycads, and ferns. Plant species present include the
References
- ^ PMID 28386425.
- .
- S2CID 130562173.
- ^ PMID 24768054.
- PMID 19828548.
- ^ a b Chiappe, L.M.; Kellner, A.W.A.; Rivarola, D.; Davila, S.; Fox, M. (2000). "Cranial Morphology of Pterodaustro guinazui (Pterosauria: Pterodactyloidea) from the Lower Cretaceous of Argentina". Natural History Museum of Los Angeles Contributions in Science. 483: 1–19.
- .
- .
- ^ ISBN 978-0-691-15061-1.
- S2CID 31314805.
- PMID 23185539.
- PMID 26157605.
- ^ .
- S2CID 84944844.
- .
- S2CID 206562572.
- .
- .
- ^ .
- .
- .
- S2CID 128997266.