History of the transistor
This article may misquote or misrepresent many of its sources. Please see the cleanup page for more information. (August 2022) |
Year | Technology | Organization |
---|---|---|
1947 | Point contact | Bell Labs |
1948 | Grown junction | Bell Labs |
1951 | Alloy junction | General Electric |
1953 | Surface barrier | Philco |
1953 | JFET | Bell Labs |
1954 | Diffused base |
Bell Labs |
1954 | Mesa |
Bell Labs |
1959 | Planar |
Fairchild |
1959 | MOSFET | Bell Labs |
A
Transistors are broadly classified into two categories: bipolar junction transistor (BJT) and field-effect transistor (FET).[3]
The principle of a
The
Origins of transistor concept
The first patent[5] for the field-effect transistor principle was filed in Canada by Austrian-Hungarian physicist Julius Edgar Lilienfeld on October 22, 1925, but Lilienfeld published no research articles about his devices, and his work was ignored by industry. In 1934 German physicist Dr. Oskar Heil patented another field-effect transistor.[6] There is no direct evidence that these devices were built, but later work in the 1990s show that one of Lilienfeld's designs worked as described and gave substantial gain. Legal papers from the Bell Labs patent show that William Shockley and a co-worker at Bell Labs, Gerald Pearson, had built operational versions from Lilienfeld's patents, yet they never referenced this work in any of their later research papers or historical articles.[7]
The Bell Lab's work on the transistor emerged from war-time efforts to produce extremely pure
After the war, Shockley decided to attempt the building of a
The key to the development of the transistor was the further understanding of the process of the electron mobility in a semiconductor. It was realized that if there was some way to control the flow of the electrons from the emitter to the collector of this newly discovered diode (discovered 1874; patented 1906), one could build an amplifier. For instance, if one placed contacts on either side of a single type of crystal, the current would not flow through it. However, if a third contact could then "inject" electrons or holes into the material, the current would flow.
Actually doing this appeared to be very difficult. If the crystal were of any reasonable size, the number of electrons (or holes) required to be injected would have to be very large, making it less useful as an amplifier because it would require a large injection current to start with. That said, the whole idea of the crystal diode was that the crystal itself could provide the electrons over a very small distance, the depletion region. The key appeared to be to place the input and output contacts very close together on the surface of the crystal on either side of this region.
Brattain started working on building such a device, and tantalizing hints of amplification continued to appear as the team worked on the problem. Sometimes the system would work, but then stop working unexpectedly. In one instance a non-working system started working when placed in water. The electrons in any one piece of the crystal would migrate about due to nearby charges. Electrons in the emitters, or the "holes" in the collectors, would cluster at the surface of the crystal, where they could find their opposite charge "floating around" in the air (or water). Yet they could be pushed away from the surface with the application of a small amount of charge from any other location on the crystal. Instead of needing a large supply of injected electrons, a very small number in the right place on the crystal would accomplish the same thing.
Their understanding solved the problem of needing a very small control area to some degree. Instead of needing two separate semiconductors connected by a common, but tiny, region, a single larger surface would serve. The emitter and collector leads would both be placed very close together on the top, with the control lead placed on the base of the crystal. When current was applied to the "base" lead, the electrons or holes would be pushed out, across the block of semiconductor, and collect on the far surface. As long as the emitter and collector were very close together, this should allow enough electrons or holes between them to allow conduction to start.
An early witness of the phenomenon was Ralph Bray, a young graduate student. He joined the germanium effort at Purdue University in November 1943 and was given the tricky task of measuring the spreading resistance at the metal–semiconductor contact. Bray found a great many anomalies, such as internal high-resistivity barriers in some samples of germanium. The most curious phenomenon was the exceptionally low resistance observed when voltage pulses were applied. This effect remained a mystery because nobody realised, until 1948, that Bray had observed minority-carrier injection – the effect that was identified by William Shockley at Bell Labs and made the transistor a reality.
Bray wrote: "That was the one aspect that we missed, but even had we understood the idea of minority carrier injection... we would have said, 'Oh, this explains our effects.' We might not necessarily have gone ahead and said, 'Let's start making transistors,' open up a factory and sell them... At that time the important device was the high back voltage rectifier".[10]
Shockley's research team initially attempted to build a field-effect transistor (FET), by trying to modulate the conductivity of a
First working transistor
The Bell team made many attempts to build such a system with various tools, but generally failed. Setups where the contacts were close enough were invariably as fragile as the original cat's whisker detectors had been, and would only work briefly, if at all. Eventually they had a practical breakthrough. A piece of gold foil was glued to the edge of a triangular plastic wedge, and then the foil was sliced with a razor at the tip of the triangle. The result was two very closely spaced contacts of gold. When the plastic was pushed down onto the surface of a crystal and voltage applied to the other side (on the base of the crystal), current started to flow from one contact to the other as the base voltage pushed the electrons away from the base towards the other side near the contacts. The point-contact transistor had been invented.
From Walter Brittain's laboratory notebook entry of 15 December 1947, "When the points were very close together got voltage amp about 2 but not power amp. This voltage amplification was independent of frequency 10 to 10,000 cycles".[13]
And in the 16 December 1947 notes, "Using this double point contact, contact was made to a germanium surface that had been anodized to 90 volts, electrolyte washed off in H2O and then had some gold spots evaporated on it. The gold contacts were pressed down on the bare surface. Both gold contacts to the surface rectified nicely... The separation between points was about 4x10−3 cm. One point was used as a grid and the other point as a plate. The bias (D.C.) on the grid had to be positive to get amplification... power gain 1.3 voltage gain 15 on a plate bias of about 15 volts".[14]
Brattain and H. R. Moore made a demonstration to several of their colleagues and managers at Bell Labs on the afternoon of 23 December 1947, often given as the birth date of the transistor. The "PNP point-contact germanium transistor" operated as a speech amplifier with a power gain of 18 in that trial. In 1956
Twelve people are mentioned as directly involved in the invention of the transistor in the Bell Laboratory.[15]
At the same time some European scientists were led by the idea of solid-state amplifiers. The German physicist Herbert F. Mataré (1912–2011) had conducted experiments at Telefunken with what he called "Duodiode" (double diode) from 1942, when he first observed transconductance effects with silicon diodes manufactured for German radar equipment for WWII. Finally on 13 August 1948, Mataré and Heinrich Welker (1912–1981), working at Compagnie des Freins et Signaux Westinghouse in Aulnay-sous-Bois, France applied for a patent on an amplifier based on the minority carrier injection process which they called the "Transistron".[16][17][18][19] The device was shown publicly on 18 May 1949. Transistrons were commercially manufactured for the French telephone company and military, and in 1953 a solid-state radio receiver with four transistrons was demonstrated at the Düsseldorf Radio Fair.
As Bell Labs did not make a public announcement of their transistor before June 1948, the transistron was an independent
Etymology
Transistor. This is an abbreviated combination of the words "transconductance" or "transfer", and "varistor". The device logically belongs in the varistor family, and has the transconductance or transfer impedance of a device having gain, so that this combination is descriptive.
— Bell Telephone Laboratories — Technical Memorandum (May 28, 1948)
Pierce recalled the naming somewhat differently:
The way I provided the name, was to think of what the device did. And at that time, it was supposed to be the dual of the vacuum tube. The vacuum tube had transconductance, so the transistor would have 'transresistance.' And the name should fit in with the names of other devices, such as varistor and thermistor. And. . . I suggested the name 'transistor.'
— John R. Pierce, interviewed for PBS show "Transistorized!"
The Nobel Foundation states that the term is a combination of the words "transfer" and "resistor".[22]
Early conflict
Shockley was upset about the device being credited to Brattain and Bardeen, who he felt had built it "behind his back" to take the glory. Matters became worse when Bell Labs lawyers found that some of Shockley's own writings on the transistor were close enough to those of an earlier 1925 patent by Julius Edgar Lilienfeld that they thought it best that his name be left off the patent application.
Improvements in transistor design
Switch to silicon
Germanium was difficult to purify and had a limited operational temperature range. Scientists theorized that
Up until the late 1950s, however,
Silicon surface passivation
In 1955, Carl Frosch and Lincoln Derick at Bell Telephone Laboratories (BTL) accidentally discovered that silicon dioxide (SiO2) could be grown on silicon. They showed that oxide layer prevented certain dopants into the silicon wafer, while allowing for others, thus discovering the passivating effect of oxidation on the semiconductor surface.
Planar process
At a 1958
The planar process was developed by Jean Hoerni while working at Fairchild Semiconductor, with a first patent issued in 1959.[34][35] The planar process used to make these transistors made mass-produced monolithic silicon integrated circuits possible.
MOSFET
In 1959, the MOSFET was introduced and in 2020 it was still the dominant transistor type in use, with an estimated total of 13 sextillion (1.3×1022) MOSFETs manufactured between 1960 and 2018. The key advantages of a MOSFET transistors over BJTs are that they consume no current except when switching states and they have faster switching speed (ideal for digital signals).
Early commercialization
The world's first commercial transistor production line was at the Western Electric plant on Union Boulevard in Allentown, Pennsylvania. Production began on Oct. 1, 1951 with the point contact germanium transistor.[36]
The first commercial application of transistors in
By 1953, the transistor was being used in some products, such as hearing aids and telephone exchanges, but there were still significant issues preventing its broader application, such as sensitivity to moisture and the fragility of the wires attached to germanium crystals.[38] Donald G. Fink, Philco's director of research, summarized the status of the transistor's commercial potential with an analogy: "Is it a pimpled adolescent, now awkward, but promising future vigor? Or has it arrived at maturity, full of languor, surrounded by disappointments?"[38]
Semiconductor companies initially focused on
Transistor radios
Prototypes of all-transistor AM radio receivers were demonstrated, but were really only laboratory curiosities. However, in 1950 Shockley developed a radically different type of solid-state amplifier which became known as the bipolar junction transistor, which works on a completely different principle than the point-contact transistor. Morgan Sparks made the bipolar junction transistor into a practical device.[40][41] These were also licensed to a number of other electronics companies, including Texas Instruments, who produced a limited run of transistor radios as a sales tool. Early transistors were chemically unstable and only suitable for low-power, low-frequency applications, but as transistor design developed, these problems were slowly overcome.
There are numerous claimants to the title of the first company to produce practical transistor radios. Texas Instruments had demonstrated all-transistor AM radios as early as 1952, but their performance was well below that of equivalent vacuum tube models. A workable all-transistor radio was demonstrated in August 1953 at the Düsseldorf Radio Fair by the German firm Intermetall. It was built with four of Intermetall's hand-made transistors, based upon the 1948 invention of Herbert Mataré and Heinrich Welker. However, as with the early Texas units (and others) only prototypes were ever built; it was never put into commercial production.
The first transistor radio is often incorrectly attributed to Sony (originally Tokyo Tsushin Kogyo), which released the TR-55 in 1955. However, it was predated by the Regency TR-1, made by the Regency Division of I.D.E.A. (Industrial Development Engineering Associates) of Indianapolis, Indiana, which was the first practical transistor radio.[citation needed] The TR-1 was announced on October 18, 1954, and put on sale in November 1954 for US$49.95 (the equivalent of about US$500 in year-2020 dollars) and sold about 150,000 units.[citation needed]
The TR-1 used four Texas NPN transistors and had to be powered by a 22.5-volt battery, since the only way to get adequate
Still, aside from its indifferent performance, the TR-1 was a very advanced product for its time, using printed circuit boards, and what were then considered micro-miniature components.
Masaru Ibuka, co-founder of the Japanese firm Sony, was visiting the United States when Bell Labs announced the availability of manufacturing licenses, including detailed instructions on how to manufacture junction transistors. Ibuka obtained special permission from the Japanese Ministry of Finance to pay the $50,000 license fee, and in 1955 the company introduced their own five-transistor "coatpocket" radio, the TR-55, under the new brand name Sony. This product was soon followed by more ambitious designs, but it is generally regarded as marking the commencement of Sony's growth into a manufacturing superpower.
The TR-55 was quite similar to the Regency TR-1 in many ways, being powered by the same sort of 22.5-volt battery, and was not much more practical. Note: according to the schematic, the TR-55 used a 6 volt supply.[42] Very few were distributed outside Japan. It was not until 1957 that Sony produced their ground-breaking "TR-63" shirt pocket radio, a much more advanced design that ran on a standard 9-volt battery and could compete favorably with vacuum tube portables. The TR-63 was also the first transistor radio to use all miniature components. (The term "pocket" was a matter of some interpretation, as Sony allegedly had special shirts made with oversized pockets for their salesmen.)
In the April 28th 1955 edition of the Wall Street Journal, Chrysler and Philco announced that they had developed and produced the world's first all-transistor car radio.[43] Chrysler made the all-transistor car radio, Mopar model 914HR, available as an "option" in Fall 1955 for its new line of 1956 Chrysler and Imperial cars, which hit the showroom floor on October 21, 1955. The all-transistor car radio was a $150 option.[44][45][46]
The Sony TR-63, released in 1957, was the first mass-produced transistor radio, leading to the mass-market penetration of transistor radios.
Hobby use
The first low-cost junction transistor available to the general public was the CK722, a PNP germanium small signal unit introduced by Raytheon in early 1953 for $7.60 each. In the 1950s and 1960s, hundreds of hobbyist electronics projects based around the CK722 transistor were published in popular books and magazines.[51][52] Raytheon also participated in expanding the role of the CK722 as a hobbyist electronics device by publishing "Transistor Applications" and "Transistor Applications- Volume 2" during the mid-1950s.
Transistor computers
The world's first transistor computer was built at the University of Manchester in November 1953. The computer was built by Richard Grimsdale, then a research student in the Department of Electrical Engineering and later a professor of Electronic Engineering at Sussex University. The machine used point-contact transistors, made in small quantities by STC and Mullard. These consisted of a single crystal of germanium with two fine wires, resembling the crystal and cat's whisker of the 1920s. These transistors had the useful property that a single transistor could possess two stable states. ... The development of the machine was severely hampered by the unreliability of the transistors. It consumed 150 watts.[53]
Metropolitan Vickers Ltd rebuilt the full 200 transistor (& 1300 diode) design in 1956 using junction transistors (for internal use).[54]
The IBM 7070 (1958), IBM 7090 (1959), and CDC 1604 (1960) were the first computers (as products for sale) based on transistors.
MOSFET (MOS transistor)
Building on his silicon
The
The first gallium-arsenide Schottky-gate field-effect transistor (MESFET) was made by Carver Mead and reported in 1966.[63] The first report of a floating-gate MOSFET (FGMOS) was made by Dawon Kahng and Simon Sze in 1967.[64]
The MOSFET has since become the most widely manufactured device in history.
PMOS and NMOS
There were originally two types of MOSFET logic,
CMOS
A new type of MOSFET logic,
Self-aligned gate
The
MOSFET commercialization
The
Integrated circuits
By 1972, MOS
Semiconductor memory
The first modern
The earliest practical application of
Microprocessors
The
Pocket calculators
One of the earliest influential
Personal computers
In the 1970s, the MOS microprocessor was the basis for
Power electronics
The
The power MOSFET, which is commonly used in power electronics, was developed in the early 1970s.[91] The power MOSFET enables low gate drive power, fast switching speed, and advanced paralleling capability.[88]
Sustainable transistors
In late April 2023, researchers at Linköping University and KTH Royal Institute of Technology successfully developed the world's first wooden transistor, potentially paving the way for more sustainable electronics and even the control of electronic plants, according to an article on Hackster.io. The team created a functional transistor to switch electronic signals using cellulose-based electrolyte and lignin-derived organic semiconductors. This breakthrough could lead to further research in creating environmentally friendly electronic devices and exploring the possibility of integrating electronics into living plants for monitoring and control purposes.[92]
Patents
- US 1745175 Julius Edgar Lilienfeld: "Method and apparatus for controlling electric current" first filed in Canada on 1925-10-22, describing a field-effect transistor
- US 1900018 Julius Edgar Lilienfeld: "Device for controlling electric current" filed on 1928-03-28, a thin film field-effect transistor
- GB 439457 Oskar Heil: "Improvements in or relating to electrical amplifiers and other control arrangements and devices" first filed in Germany on 1934-03-02
- US 2524035 John Bardeen et al.: "Three-electrode circuit element utilizing semiconductive materials" oldest priority 1948-02-26
- US 2569347 William Shockley: "Circuit element utilizing semiconductive material" oldest priority 1948-06-26
- US 3206670 Mohamed Atalla: "Semiconductor devices having dielectric coatings" filed in 1960-08-03, describing a MOSFET
- US 3102230 Dawon Kahng: "Electric field controlled semiconductor device" filed in 1960-08-03, describing a MOSFET
References
- ^ Gaudin, Sharon. "The transistor: The most important invention of the 20th century?". ComputerWorld.
- ^ "History of the Transistor". www.sjsu.edu. Retrieved 17 January 2021.
- ^ "Types of Transistors – Junction Transistors and FETs". Electronics Hub. 23 April 2019. Retrieved 17 January 2021.
- ^ "What is a FET: Field Effect Transistor » Electronics Notes". www.electronics-notes.com. Retrieved 16 January 2021.
- ^ US 1745175 Julius Edgar Lilienfeld: "Method and apparatus for controlling electric current" first filed in Canada on 22.10.1925, describing a field-effect transistor
- ^ GB 439457 Oskar Heil: "Improvements in or relating to electrical amplifiers and other control arrangements and devices" first filed in Germany on March 2, 1934
- . Retrieved October 28, 2012.
- ^ "Radar tube development" (PDF).
- ^ Bray, Ralph "The Origin of Semiconductor Research at Purdue". Purdue University, Department of Physics.
- ^ R. Bray, interview with P. Henriksen, 14 May 1982, Niels Bohr Library, American Institute of Physics, New York.
- ISBN 978-1-139-64377-1.
- ISBN 978-3-527-34053-8.
- ^ W. H. Brattain, entry of 15 December 1947, laboratory notebook, case 38139-7. Bell Laboratories archives.
- ^ Brattain, entry of 16 December 1947 (ibid)
- ^ W. S. Gorton, "Genesis of the Transistor," written in December 1949 and intended for volume 3 of A History of Engineering and Science in the Bell System.
- ^ FR 1010427 H. F. Mataré/H. Welker/Westinghouse: "Nouveau système cristallin à plusieurs électrodes réalisant des effects de relais électroniques" filed on 13.08.1948
- ^ US 2673948 H. F. Mataré/H. Welker/Westinghouse: "Crystal device for controlling electric currents by means of a solid semiconductor" FR priority 13.08.1948
- ^ Van Dormael, Armand (June 2004). "The "French" Transistor" (PDF). Proceedings of the 2004 IEEE Conference on the History of Electronics, Bletchley Park. Archived from the original (PDF) on March 10, 2012. Retrieved October 28, 2012.
- ^ "Transistron image". Computer History Museum
- ISBN 978-0-14-312279-1.
- ^ The Genesis of the Transistor, with Bonus Introduction (AT&T Archives video, posted 2012Jul19)
- ^ Nobelprize.org – The Transistor
- .
- ^ IEEE Spectrum, The Lost History of the Transistor, Author: Michael Riordan, May 2004, pp. 48–49.
- ^ Bell System Technical J., 35, 1–34, 1955.
- ISBN 978-981-02-3286-3.
- ISBN 978-3-662-09897-4.
- ISBN 978-3-540-41682-1.
- ^ a b c d "Martin (John) M. Atalla". National Inventors Hall of Fame. 2009. Retrieved 21 June 2013.
- ^ a b "Dawon Kahng". National Inventors Hall of Fame. Retrieved 27 June 2019.
- ISBN 978-0-8018-8639-3.
- ^ ISBN 978-3-540-34258-8.
- ^ ISBN 978-0-8018-8639-3.
- ^ US 3025589 Hoerni, J. A.: "Method of Manufacturing Semiconductor Devices" filed May 1, 1959
- ^ US 3064167 Hoerni, J. A.: "Semiconductor device" filed May 15, 1960
- ^ Bonner, Jeanne (2007-03-04). "Transistor transition began in Allentown". The Morning Call. Retrieved 2023-07-10.
On Oct. 1, 1951, the world's first commercial transistor production line went live at the Western Electric plant on Union Boulevard in Allentown.
- ^ Transistors Enter Telephone Service, Bell Laboratory Record, Volume 30(11), p.439 (November 1952)
- ^ a b "Problem Child". Time. 1953-09-07. Archived from the original on November 14, 2007. Retrieved 2009-05-28.
- ^ ISBN 978-0-470-50892-3.
- ^ Melanie Dabovich (Associated Press) (2008-05-06). "Former Sandia labs director dies". New Mexico: Las Cruces Sun-News. Archived from the original on 2008-05-10. Retrieved 2008-05-07.
- ^ "Morgan Sparks". PBS. Retrieved 2008-05-06.
- ^ radiomuseum.org
- ^ Wall Street Journal, "Chrysler Promises Car Radio With Transistors Instead of Tubes in '56", April 28th 1955, page 1
- ^ "1955: Chrysler's All-Transistor Mopar Car Radio". www.allpar.com. November 16, 2020.
- ^ "Mopar 914-HR Ch= C-5690HR Car Radio Philco, Philadelphia" (in German). Radiomuseum.org. Retrieved 2021-11-24.
- ^ "Heritage 1950-1959". FCA North America. Archived from the original on 2 April 2015.
- ISBN 978-0-313-39863-6.
- ^ Snook, Chris J. (29 November 2017). "The 7 Step Formula Sony Used to Get Back On Top After a Lost Decade". Inc.
- ISBN 0-87069-712-9. pages 2-7
- ^ Kozinsky, Sieva (8 January 2014). "Education and the Innovator's Dilemma". Wired. Retrieved 14 October 2019.
- ^ "How to Build Experimental Transistor Receivers". Popular Mechanics. Vol. 100, no. 4. Chicago: Popular Mechanics Co. October 1953. pp. 246–248.
- ^ Garner, Lou (November 1957). "Transistorized Instrument Amplifier". Popular Mechanics. Vol. 108, no. 5. Chicago: Popular Mechanics Co. pp. 160–162.
- ^ The University of Manchester Celebrates the Birth of the Modern Computer Archived 2012-05-04 at the Wayback Machine from Computer50.org
- ^ The Transistor Computer
- ^ "1960 - Metal Oxide Semiconductor (MOS) Transistor Demonstrated". The Silicon Engine. Computer History Museum.
- ^ ISBN 978-3-540-34258-8.
- ISBN 978-0-8018-8639-3.
- Atalla, M.; Kahng, D.(1960). "Silicon-silicon dioxide field induced surface devices". IRE-AIEE Solid State Device Research Conference.
- S2CID 29105721.
- EETimes. 12 December 2018. Retrieved 18 July 2019.
- ^ a b "Who Invented the Transistor?". Computer History Museum. 4 December 2013. Retrieved 20 July 2019.
- ^ JSTOR 24923169.
- .
- ^ D. Kahng and S. M. Sze, "A floating-gate and its application to memory devices", The Bell System Technical Journal, vol. 46, no. 4, 1967, pp. 1288–1295
- ^ a b "13 Sextillion & Counting: The Long & Winding Road to the Most Frequently Manufactured Human Artifact in History". Computer History Museum. April 2, 2018. Retrieved 28 July 2019.
- ISBN 978-1-118-03823-9.
- ^ "1960 - Metal Oxide Semiconductor (MOS) Transistor Demonstrated". The Silicon Engine. Computer History Museum.
- ^ "1963: Complementary MOS Circuit Configuration is Invented". Computer History Museum. Retrieved 6 July 2019.
- .
- ^ a b "1968: Silicon Gate Technology Developed for ICs". Computer History Museum. Retrieved 22 July 2019.
- ^ Chan, Yi-Jen (1992). Studies of InAIAs/InGaAs and GaInP/GaAs heterostructure FET's for high speed applications. University of Michigan. p. 1.
The Si MOSFET has revolutionized the electronics industry and as a result impacts our daily lives in almost every conceivable way.
- Electronic Design. 21 April 2017. Retrieved 23 July 2019.
- ISBN 978-0-471-82867-9.
The metal–oxide–semiconductor field-effect transistor (MOSFET) is the most commonly used active device in the very large-scale integration of digital integrated circuits (VLSI). During the 1970s these components revolutionized electronic signal processing, control systems and computers.
- ^ "Remarks by Director Iancu at the 2019 International Intellectual Property Conference". United States Patent and Trademark Office. June 10, 2019. Retrieved 20 July 2019.
- ^ ISBN 978-1-107-05240-6.
- ^ "1964 – First Commercial MOS IC Introduced". Computer History Museum.
- ^ "Tortoise of Transistors Wins the Race - CHM Revolution". Computer History Museum. Retrieved 22 July 2019.
- ISSN 1098-4232.
- ^ "Design News". Design News. 27 (1–8). Cahners Publishing Company: 275. 1972.
Today, under contracts with some 20 major companies, we're working on nearly 30 product programs—applications of MOS/LSI technology for automobiles, trucks, appliances, business machines, musical instruments, computer peripherals, cash registers, calculators, data transmission and telecommunication equipment.
- ^ Solid State Design - Vol. 6. Horizon House. 1965.
- Encyclopedia Britannica. Retrieved 8 July 2019.
- ^ "1971: Reusable semiconductor ROM introduced". Computer History Museum. Retrieved 19 June 2019.
- ^ "1971: Microprocessor Integrates CPU Function onto a Single Chip | The Silicon Engine". Computer History Museum. Retrieved 22 July 2019.
- ^ Cushman, Robert H. (20 September 1975). "2-1/2-generation μP's-$10 parts that perform like low-end mini's" (PDF). EDN.
- ^ a b Nigel Tout. "Sharp QT-8D "micro Compet"". Vintage Calculators Web Museum. Retrieved September 29, 2010.
- ^ a b c "Hand-held Calculators". Vintage Calculators Web Museum. Retrieved 22 July 2019.
- ISBN 978-0-8412-2861-0.
The relative simplicity and low power requirements of MOSFETs have fostered today's microcomputer revolution.
- ^ a b "Power MOSFET Basics" (PDF). Alpha & Omega Semiconductor. Retrieved 29 July 2019.
- ^ "Power Supply Technology - Buck DC/DC Converters". Mouser Electronics. Retrieved 11 August 2019.
- ISBN 978-0-471-82867-9.
- ISBN 978-0-8493-8343-4.
- ^ Halfacree, Gareth. "Researchers Build the World's First Wooden Transistor, Aim at Control of Electronic Plants". Hackster.io. Retrieved 30 April 2023.
Books and literature
- Gertner, John (2012). ISBN 978-0-14-312279-1. A history of Bell Laboratories and its technological innovations
- ISBN 978-0-393-31851-7. The invention of the transistor & the birth of the information age
- Kai Handel (1999-06-29). "Anfänge der Halbleiterforschung und -entwicklung. Dargestellt an den Biographien von vier deutschen Halbleiterpionieren". PhD Thesis RWTH Aachen.
- Out of the Crystal Maze Chapters from The History of Solid State Physics (728s)
- Electronic Genie: THE TANGLED HISTORY OF SILICON (304s)
- The INVENTION THAT CHANGED THE WORLD: HOW A SMALL GROUP OF RADAR PIONEERS WON THE SECOND WORLD WAR AND LAUNCHED A TECH (576s)
External links
- The Bell Systems Memorial on Transistors.
- IEEE Global History Network, The Transistor and Portable Electronics. All about the history of transistors and integrated circuits.
- Transistorized. Historical and technical information from the Public Broadcasting Service
- This Month in Physics History: November 17 to December 23, 1947: Invention of the First Transistor. From the American Physical Society
- 50 Years of the Transistor. From Science Friday, December 12, 1997
- Jack Ganssle "The transistor: 60 years old and still switching". EEtimes article, November 28, 2007
- John Markoff "Parallel Inventor of the Transistor Has His Moment." New York Times, 24 February 2003
- Michael Riordan "How Europe Missed The Transistor". IEEE Spectrum, Vol. 42, Issue 11 S. 52 - 57 November 2005
- Armand Van Dormael "The 'French' Transistor".
- Mark P D Burgess (2008) "Semiconductor History: Faraday to Shockley"