Plant morphology

Source: Wikipedia, the free encyclopedia.

Phytomorphology is the study of the

ontogenetic transitions during the plant life cycle which may result in evolutionary constraints limiting diversification.[3]

Inflorescences
emerging from protective coverings

Scope

Asclepias syriaca showing complex morphology of the flowers.
Looking up into the branch structure of a Pinus sylvestris tree
Animation of zooming into the leaf of a Sequoia sempervirens (Californian Redwood).

Plant morphology "represents a study of the development, form, and structure of plants, and, by implication, an attempt to interpret these on the basis of similarity of plan and origin".

biological sciences
.

First of all, morphology is

cactus also share the same basic structure and development as leaves in other plants, and therefore cactus spines are homologous to leaves as well. This aspect of plant morphology overlaps with the study of plant evolution and paleobotany
.

Secondly, plant morphology observes both the vegetative (somatic) structures of plants, as well as the reproductive structures. The vegetative structures of

plant systematics
.

Thirdly, plant morphology studies plant structure at a range of scales. At the smallest scales are

grass
.

Fourthly, plant morphology examines the pattern of development, the process by which structures originate and mature as a plant grows. While animals produce all the body parts they will ever have from early in their life, plants constantly produce new tissues and structures throughout their life. A living plant always has embryonic tissues. The way in which new structures mature as they are produced may be affected by the point in the plant's life when they begin to develop, as well as by the environment to which the structures are exposed. A morphologist studies this process, the causes, and its result. This area of plant morphology overlaps with plant physiology and ecology.

A comparative science

A plant morphologist makes comparisons between structures in many different plants of the same or different species. Making such comparisons between similar structures in different plants tackles the question of why the structures are similar. It is quite likely that similar underlying causes of genetics, physiology, or response to the environment have led to this similarity in appearance. The result of scientific investigation into these causes can lead to one of two insights into the underlying biology:

  1. Homology - the structure is similar between the two species because of shared ancestry and common genetics.
  2. Convergence - the structure is similar between the two species because of independent adaptation to common environmental pressures.

Understanding which characteristics and structures belong to each type is an important part of understanding plant evolution. The evolutionary biologist relies on the plant morphologist to interpret structures, and in turn provides phylogenies of plant relationships that may lead to new morphological insights.

Homology

When structures in different species are believed to exist and develop as a result of common, inherited genetic pathways, those structures are termed homologous. For example, the leaves of pine, oak, and cabbage all look very different, but share certain basic structures and arrangement of parts. The homology of leaves is an easy conclusion to make. The plant morphologist goes further, and discovers that the spines of cactus also share the same basic structure and development as leaves in other plants, and therefore cactus spines are homologous to leaves as well.

Convergence

When structures in different species are believed to exist and develop as a result of common adaptive responses to environmental pressure, those structures are termed convergent. For example, the fronds of

cacti and species of Euphorbia
is very similar, even though they belong to widely distant families. The similarity results from common solutions to the problem of surviving in a hot, dry environment.

Vegetative and reproductive characteristics

eudicot
.

Plant morphology treats both the vegetative structures of plants, as well as the reproductive structures.

The vegetative (somatic) structures of vascular plants include two major organ systems: (1) a shoot system, composed of stems and leaves, and (2) a root system. These two systems are common to nearly all vascular plants, and provide a unifying theme for the study of plant morphology.

By contrast, the reproductive structures are varied, and are usually specific to a particular group of plants. Structures such as

angiosperms; sori are only found in ferns; and seed cones are only found in conifers and other gymnosperms
. Reproductive characters are therefore regarded as more useful for the classification of plants than vegetative characters.

Use in identification

Plant biologists use morphological characters of plants which can be compared, measured, counted and described to assess the differences or similarities in plant taxa and use these characters for plant identification, classification and descriptions.

When characters are used in descriptions or for identification they are called diagnostic or key characters which can be either qualitative and quantitative.

  1. Quantitative characters are morphological features that can be counted or measured for example a plant species has flower petals 10–12 mm wide.
  2. Qualitative characters are morphological features such as leaf shape, flower color or pubescence.

Both kinds of characters can be very useful for the identification of plants.

Alternation of generations

The detailed study of reproductive structures in plants led to the discovery of the

algae, by the German botanist Wilhelm Hofmeister
. This discovery is one of the most important made in all of plant morphology, since it provides a common basis for understanding the life cycle of all plants.

Pigmentation in plants

The primary function of pigments in plants is photosynthesis, which uses the green pigment chlorophyll along with several red and yellow pigments that help to capture as much light energy as possible the other pigments ic carotenoids'. Pigments are also an important factor in attracting insects to flowers to encourage pollination.

Plant pigments include a variety of different kinds of molecule, including porphyrins, carotenoids, anthocyanins and betalains. All biological pigments selectively absorb certain wavelengths of light while reflecting others. The light that is absorbed may be used by the plant to power chemical reactions, while the reflected wavelengths of light determine the color the pigment will appear to the eye.

Morphology in development

Plant development is the process by which structures originate and mature as a plant grows. It is a subject studies in plant anatomy and plant physiology as well as plant morphology.

The process of development in plants is fundamentally different from that seen in vertebrate animals. When an animal embryo begins to develop, it will very early produce all of the body parts that it will ever have in its life. When the animal is born (or hatches from its egg), it has all its body parts and from that point will only grow larger and more mature. By contrast, plants constantly produce new tissues and structures throughout their life from meristems[5] located at the tips of organs, or between mature tissues. Thus, a living plant always has embryonic tissues.

The properties of organisation seen in a plant are emergent properties which are more than the sum of the individual parts. "The assembly of these tissues and functions into an integrated multicellular organism yields not only the characteristics of the separate parts and processes but also quite a new set of characteristics which would not have been predictable on the basis of examination of the separate parts."[6] In other words, knowing everything about the molecules in a plant are not enough to predict characteristics of the cells; and knowing all the properties of the cells will not predict all the properties of a plant's structure.

Growth

A vascular plant begins from a single celled zygote, formed by fertilisation of an egg cell by a sperm cell. From that point, it begins to divide to form a plant embryo through the process of embryogenesis. As this happens, the resulting cells will organise so that one end becomes the first root, while the other end forms the tip of the shoot. In seed plants, the embryo will develop one or more "seed leaves" (cotyledons). By the end of embryogenesis, the young plant will have all the parts necessary to begin in its life.

Once the embryo

cambium.[8]

In addition to growth by cell division, a plant may grow through cell elongation. This occurs when individual cells or groups of cells grow longer. Not all plant cells will grow to the same length. When cells on one side of a stem grow longer and faster than cells on the other side, the stem will bend to the side of the slower growing cells as a result. This directional growth can occur via a plant's response to a particular stimulus, such as light (phototropism), gravity (gravitropism), water, (hydrotropism), and physical contact (thigmotropism).

Plant growth and development are mediated by specific plant hormones and plant growth regulators (PGRs) (Ross et al. 1983).[9] Endogenous hormone levels are influenced by plant age, cold hardiness, dormancy, and other metabolic conditions; photoperiod, drought, temperature, and other external environmental conditions; and exogenous sources of PGRs, e.g., externally applied and of rhizospheric origin.

Morphological variation

Plants exhibit natural variation in their form and structure. While all organisms vary from individual to individual, plants exhibit an additional type of variation. Within a single individual, parts are repeated which may differ in form and structure from other similar parts. This variation is most easily seen in the leaves of a plant, though other organs such as stems and flowers may show similar variation. There are three primary causes of this variation: positional effects, environmental effects, and juvenility.

Evolution of plant morphology

Transcription factors and transcriptional regulatory networks play key roles in plant morphogenesis and their evolution. During plant landing, many novel transcription factor families emerged and are preferentially wired into the networks of multicellular development, reproduction, and organ development, contributing to more complex morphogenesis of land plants.[10]

Positional effects

Variation in leaves from the giant ragweed illustrating positional effects. The lobed leaves come from the base of the plant, while the unlobed leaves come from the top of the plant.

Although plants produce numerous copies of the same organ during their lives, not all copies of a particular organ will be identical. There is variation among the parts of a mature plant resulting from the relative position where the organ is produced. For example, along a new branch the leaves may vary in a consistent pattern along the branch. The form of leaves produced near the base of the branch will differ from leaves produced at the tip of the plant, and this difference is consistent from branch to branch on a given plant and in a given species. This difference persists after the leaves at both ends of the branch have matured, and is not the result of some leaves being younger than others.

Environmental effects

The way in which new structures mature as they are produced may be affected by the point in the plant's life when they begin to develop, as well as by the environment to which the structures are exposed. This can be seen in

emergent plants
.

Temperature

Temperature has a multiplicity of effects on plants depending on a variety of factors, including the size and condition of the plant and the temperature and duration of exposure. The smaller and more succulent the plant, the greater the susceptibility to damage or death from temperatures that are too high or too low. Temperature affects the rate of biochemical and physiological processes, rates generally (within limits) increasing with temperature. However, the Van’t Hoff relationship for monomolecular reactions (which states that the velocity of a reaction is doubled or trebled by a temperature increase of 10 °C) does not strictly hold for biological processes, especially at low and high temperatures.

When water freezes in plants, the consequences for the plant depend very much on whether the freezing occurs intracellularly (within cells) or outside cells in intercellular (extracellular) spaces.[11] Intracellular freezing usually kills the cell regardless of the hardiness of the plant and its tissues.[12] Intracellular freezing seldom occurs in nature, but moderate rates of decrease in temperature, e.g., 1 °C to 6 °C/hour, cause intercellular ice to form, and this "extraorgan ice"[13] may or may not be lethal, depending on the hardiness of the tissue.

At freezing temperatures, water in the intercellular spaces of plant tissues freezes first, though the water may remain unfrozen until temperatures fall below 7 °C.[11] After the initial formation of ice intercellularly, the cells shrink as water is lost to the segregated ice. The cells undergo freeze-drying, the dehydration being the basic cause of freezing injury.

The rate of cooling has been shown to influence the frost resistance of tissues,

conifers is enhanced by the smallness of the buds, by the evolution of faster translocation of water, and an ability to tolerate intensive freeze dehydration. In boreal species of Picea and Pinus, the frost resistance of 1-year-old seedlings is on a par with mature plants,[16]
given similar states of dormancy.

Juvenility

European beech
. There is a marked difference in shape between the first dark green "seed leaves" and the lighter second pair of leaves.

The organs and tissues produced by a young plant, such as a

heteroblasty
. For example, young trees will produce longer, leaner branches that grow upwards more than the branches they will produce as a fully grown tree. In addition, leaves produced during early growth tend to be larger, thinner, and more irregular than leaves on the adult plant. Specimens of juvenile plants may look so completely different from adult plants of the same species that egg-laying insects do not recognise the plant as food for their young. Differences are seen in rootability and flowering and can be seen in the same mature tree. Juvenile cuttings taken from the base of a tree will form roots much more readily than cuttings originating from the mid to upper crown. Flowering close to the base of a tree is absent or less profuse than flowering in the higher branches especially when a young tree first reaches flowering age.
[17]

The transition from early to late growth forms is referred to as 'vegetative phase change', but there is some disagreement about terminology.[18]

Modern Innovations

Rolf Sattler has revised fundamental concepts of comparative morphology such as the concept of homology. He emphasised that homology should also include partial homology and quantitative homology.[19][20] This leads to a continuum morphology that demonstrates a continuum between the morphological categories of root, shoot, stem (caulome), leaf (phyllome), and hair (trichome). How intermediates between the categories are best described has been discussed by Bruce K. Kirchoff et al.[21] A recent study conducted by Stalk Institute extracted coordinates corresponding to each plant's base and leaves in 3D space. When plants on the graph were placed according to their actual nutrient travel distances and total branch lengths, the plants fell almost perfectly on the Pareto curve. "This means the way plants grow their architectures also optimises a very common network design tradeoff. Based on the environment and the species, the plant is selecting different ways to make tradeoffs for those particular environmental conditions."[22]

Honoring Agnes Arber, author of the partial-shoot theory of the leaf, Rutishauser and Isler called the continuum approach Fuzzy Arberian Morphology (FAM). “Fuzzy” refers to fuzzy logic, “Arberian” to Agnes Arber. Rutishauser and Isler emphasised that this approach is not only supported by many morphological data but also by evidence from molecular genetics.[23] More recent evidence from molecular genetics provides further support for continuum morphology. James (2009) concluded that "it is now widely accepted that... radiality [characteristic of most stems] and dorsiventrality [characteristic of leaves] are but extremes of a continuous spectrum. In fact, it is simply the timing of the KNOX gene expression!."[24] Eckardt and Baum (2010) concluded that "it is now generally accepted that compound leaves express both leaf and shoot properties.”[25]

Process morphology describes and analyses the dynamic continuum of plant form. According to this approach, structures do not have process(es), they are process(es).

spatio-temporal structure and that this spatio-temporal structure is the activity itself".[29]

For Jeune, Barabé and Lacroix, classical morphology (that is, mainstream morphology, based on a qualitative homology concept implying mutually exclusive categories) and continuum morphology are sub-classes of the more encompassing process morphology (dynamic morphology).[30]

Classical morphology, continuum morphology, and process morphology are highly relevant to plant evolution, especially the field of plant evolutionary biology (plant evo-devo) that tries to integrate plant morphology and plant molecular genetics.[31] In a detailed case study on unusual morphologies, Rutishauser (2016) illustrated and discussed various topics of plant evo-devo such as the fuzziness (continuity) of morphological concepts, the lack of a one-to-one correspondence between structural categories and gene expression, the notion of morphospace, the adaptive value of bauplan features versus patio ludens, physiological adaptations, hopeful monsters and saltational evolution, the significance and limits of developmental robustness, etc.[32] Rutishauser (2020) discussed the past and future of plant evo-devo.[33] Our conception of the gynoecium and the search for a fossil ancestor of Angiosperms changes fundamentally from the perspective of evo-devo.[34]

Whether we like it or not, morphological research is influenced by philosophical assumptions such as either/or logic, fuzzy logic, structure/process dualism or its transcendence. And empirical findings may influence the philosophical assumptions. Thus there are interactions between philosophy and empirical findings. These interactions are the subject of what has been referred to as philosophy of plant morphology.[35]

One important and unique event in plant morphology of the 21st century was the publication of Kaplan's Principles of Plant Morphology by Donald R. Kaplan, edited by Chelsea D. Specht (2020).[36] It is a well illustrated volume of 1305 pages in a very large format that presents a wealth of morphological data. Unfortunately, all of these data are only interpreted in terms of classical morphology and the qualitative homology concept, disregarding modern conceptional innovations.[37] Including continuum and process morphology as well as molecular genetics would provide an enlarged scope.[38]

See also

References

  1. ^ .
  2. .
  3. .
  4. . Review.
  5. ^ Leopold, A. C. Plant Growth and Development, page 183. (New York: McGraw-Hill, 1964).
  6. S2CID 5833219
    . Review.
  7. .
  8. ^ Ross, S.D.; Pharis, R.P.; Binder, W.D. 1983. Growth regulators and conifers: their physiology and potential uses in forestry. p. 35–78 in Nickell, L.G. (Ed.), Plant growth regulating chemicals. Vol. 2, CRC Press, Boca Raton FL.
  9. PMID 25750178
    .
  10. ^ a b Glerum, C. 1985. Frost hardiness of coniferous seedlings: principles and applications. p. 107–123 in Duryea, M.L. (Ed.). Proceedings: Evaluating seedling quality: principles, procedures, and predictive abilities of major tests. Workshop, October 1984, Oregon State Univ., For. Res. Lab., Corvallis OR.
  11. ^ Lyons, J.M.; Raison, J.K.; Steponkus, P.L. 1979. The plant membrane in response to low temperature: an overview. p. 1–24 in Lyons, J.M.; Graham, D.; Raison, J.K. (Eds.). Low Temperature Stress in Crop Plants. Academic Press, New York NY.
  12. ^ a b Sakai, A.; Larcher, W. (Eds.) 1987. Frost Survival of Plants. Springer-Verlag.
  13. ^ a b Sakai, A. 1979a. Freezing avoidance mechanism of primordial shoots of conifer buds. Plant Cell Physiol. 20:1381–1390.
  14. ^ Levitt, J. 1980. Responses of Plants to Environmental Stresses. Volume 1. Chilling, Freezing, and High Temperature Stresses, 2nd ed. Academic Press, New York NY. 497 p.
  15. ^ Sakai, A.; Okada, S. 1971. Freezing resistance of conifers. Silvae Genet. 20(3):91–97.
  16. .
  17. .
  18. .
  19. ^ Sattler, R., 1994, Homology, homeosis, and process morphology in plants. In: B.K. Hall (ed.) Homology: The hierarchical basis of comparative morphology. New York: Academic Press, pp. 423-475.
  20. .
  21. .
  22. .
  23. ^ James, P. J. (2009). "'Tree and Leaf': A different angle". The Linnean. 25: 13–19.
  24. PMID 20647343
    .
  25. .
  26. .
  27. ^ Sattler, R. 2019. Structural and dynamic approaches to the development and evolution of plant form. In: Fusco, G. (ed) Perspectives on Evolutionary and Developmental Biology. Essays for Alessandro Minelli. Chapter 6, pp. 57-70 [1]
  28. ^ Woodger, J.H. 1967. Biological Principles. London: Routledge & Kegoan Paul (reissued with a new Introduction).
  29. S2CID 25928998
    .
  30. ^ Minelli, A. 2018. Plant Evolutionary Developmental Biology. The Evolvability of the Phenotype. New York: Cambridge University Press.
  31. PMID 26589968
    .
  32. .
  33. ^ Sattler, R. (December 25, 2023). "Plant evo-devo of the gynoecium". beyondwilber.ca.
  34. ^ Sattler, R. (2018). "Philosophy of plant morphology". Elemente der Naturwissenschaft. 108: 55–79.(for an expanded version of this article see [2])
  35. ^ Kaplan, D. R. , edited by Specht,C. D. 2022. Kaplan's Principles of Plant Morphology. New York: CRC Press.
  36. S2CID 250361819
    .
  37. .

External links